-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueAlternate Metallization Processes
Traditional electroless copper and electroless copper immersion gold have been primary PCB plating methods for decades. But alternative plating metals and processes have been introduced over the past few years as miniaturization and advanced packaging continue to develop.
Technology Roadmaps
In this issue of PCB007 Magazine, we discuss technology roadmaps and what they mean for our businesses, providing context to the all-important question: What is my company’s technology roadmap?
Wet Process Control
In this issue, we examine wet processes and how to obtain a better degree of control that allows usable data to guide our decisions and produce consistently higher-quality products.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
iNEMI Webinar on Low Temperature Material for 1st Level Interconnect
June 13, 2022 | iNEMIEstimated reading time: 1 minute
The objective of iNEMI’s Low Temperature Materials for 1st Level Interconnect project is to determine the extent to which the use of lower temperature processes can provide solutions to the challenges of the accelerating trend toward heterogenous integration. Most of the elements of these packages have limits on temperature/time exposure, which makes materials that can effect reliable connections at temperatures lower than those required by conventional materials worth consideration.
A task force has reviewed material and process options currently available or under development on the basis of their compatibility with the interfaces that have to be connected and the operating conditions to which they are likely to be exposed in integrated circuit packages. Join us for this webinar in which the results of our findings about the prospects for the adoption of low temperature materials for 1st level interconnect will be presented and discussed.
Registration
This webinar is open to industry; advance registration is required. Two webinars (with the same content) are scheduled — please join whichever session fits your schedule, please visit iNEMI's website.
Session 1 (APAC)
Tuesday, June 28, 2022
10:00-11:00 a.m. JST (Japan)
9:00-10:00 p.m. EDT (Americas) on Monday, June 27
Session 2 (Americas & EMEA)
Tuesday, June 28, 2022
9:00-10:00 a.m. EDT (Americas)
3:00-4:00 p.m. CEST (Europe)
10:00-11:00 p.m. JST (Japan)
Suggested Items
DELO Introduces UV-approach for Fan-out Wafer-level Packaging
10/25/2024 | DELODELO has developed a new approach for fan-out wafer-level packaging (FOWLP). Its feasibility study shows: With the use of UV-curable molding materials instead of heat curing ones, warpage and die shift can be reduced significantly. Additionally, this leads to improvements in curing time and minimizes the energy consumption.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
Global PCB Connections: Mission Critical—Communication Between PCB Designers and Fabricators
10/24/2024 | Jerome Larez -- Column: Global PCB ConnectionsIn my first column, I want to discuss the critical importance of communications between the PCB design and the PCB fabrication engineer. I’ll explore why clear communication is so important, highlight the differences between standard and CTQ items, and outline the key issues that must be agreed upon to achieve success in PCB manufacturing.
Untapped Potential: Automating Warehouse Management Into the Present
10/15/2024 | Josh Casper, Horizon SalesThe push toward automation in electronics manufacturing has led to significant improvements in SMT and through-hole technology (THT) production. Today’s manufacturers are outfitted with precision pick-and-place machines, sophisticated inspection systems, and advanced solder deposition solutions. These investments reflect a broader industry trend toward automating high-value production tasks to boost efficiency, improve quality, and reduce headcount in a shrinking labor market. While the spotlight has rightly focused on automating SMT production, one crucial area remains woefully under-invested: materials storage and handling.
Ventec Promotes Bill Wang to Group Technical Vice President
10/14/2024 | VentecVentec International Group, a Taiwan Stock Exchange listed global supplier of advanced base materials for the PCB industry worldwide, has promoted Bill Wang to Group Technical Vice President.