-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueWet Process Control
In this issue, we examine wet processes and how to obtain a better degree of control that allows usable data to guide our decisions and produce consistently higher-quality products.
Don’t Just Survive, Thrive
If we are to be relevant and prosper during these next critical decades in electronics, we must do more than survive. As an industry, we can and must thrive. In this issue, our contributors explore these concepts meant to help you take your business to the next level.
Material Matters
Materials management is nuanced, multifaceted, and requires a holistic systems approach for business success. When building high mix, low volume, and high technology, managing materials and overall cost containment are even greater challenges.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Pricing Strategies With Michael Carano
September 13, 2022 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes
![](https://iconnect007.com/application/files/6916/9086/9445/Mike_Carano_Averatek.jpg)
We recently spoke with longtime I-Connect007 columnist Michael Carano, vice president of quality at Averatek, about pricing strategies for PCB fabricators. We’re seeing some movement in this segment as fabricators, already dealing with some of the tightest profit margins around, find themselves having to either raise their prices or trying to massage more revenue out of their already streamlined processes.
We asked Michael for some pricing strategies for fabricators, and he shared a range of options for today’s manufacturers who aren’t afraid to rethink their processes and try new ideas. And, as he says, people will still pay good money for a quality, reliable PCB.
Nolan Johnson: Let’s talk about pricing strategies for fabricators. What are you seeing?
Michael Carano: Let’s step back and think about the price per square inch, or the selling cost. For example, with substrates, people are talking about paying $6 per metal square inch per layer, and that’s pretty darn good money. Now the question is, can you get the yields? If you put these chips up, let’s say 300 on an 18"x24" four-layer, that panel could be an $1,800 to $2,400 panel and be only four layers if you make it in high yields.
Your material cost is about $200 or $300; there’s some labor in that, and you can get pretty good margins on that. Now eventually at higher volumes, if you’re building a hundred million of these a year, obviously it’s going to go down to a dollar per square inch somewhere. But for the mid-range, which could be done here with the DoD, and then some of the high end, you can get $5 or $7 per metal square inch per layer. So, if you have all that in an 18"x24", you just add it up and have $7. It becomes pretty good stuff.
Johnson: Under these current circumstances, for a long time, the fabs have basically had their margins squeezed down to the bare minimum. With this much demand, this much production, everybody this busy, and the supply chain the way it is, is this the time to start to claw back margin?
Carano: Yes, they’re grabbing margin. I think that’s happening because the chemical cost around materials has gone significantly higher in the last year and a half too. That has to translate all the way down to laminate materials, photoresist, and what have you. A lot of times folks want to commoditize a circuit board and they want to get it priced that way, but it is not a commodity. It is a highly functional, critical device and, as I have said, chips don’t float.
Those chips have no circuit board. You can make all the billions of chips you want. They’re not going to go anywhere. Those packages are reliable and when that chip is attached to a BGA substrate that goes on the circuit board, the circuit board has to be reliable, and I think that the message here is we’ve got reliability. We can do higher layer counts, tighter tolerances, and give the OEM more functionality and greater reliability than they’ve ever had before. That has to cost something and you’ve got to pay something for that. It’s time to get those margins back, especially now.
To read this entire conversation, which appeared in the August 2022 issue of PCB007 Magazine, click here.
Suggested Items
Trouble in Your Tank: Materials for PWB Fabrication—Drillability and Metallization
07/16/2024 | Michael Carano -- Column: Trouble in Your TankLaminate materials are the building blocks on which printed circuit boards are manufactured. Circuit board designers rely on the critical electrical properties of the materials to design the interconnects, and with the drive toward IoT (internet of things), autonomous driving, and virtual and augmented reality, material properties take on a very high level of importance.
Don’t Overconstrain Your Board Materials
07/02/2024 | I-Connect007 Editorial TeamWhen we started planning May’s issue, which centers on the use of traditional laminates in certain high-frequency PCBs, we knew we had to interview Kris Moyer and Ed Kelley together. Kris teaches advanced PCB design classes for IPC, and Ed is the former CTO of Isola and founder of Four Peaks Innovation. What ensued was a wide-ranging discussion on the evolution of “standard” PCB laminates and the recent trend by some OEMs to use these materials in high-frequency and even RF boards.
Underconstraining Your Materials? Leave It to the Experts
05/30/2024 | I-Connect007 Editorial TeamWith traditional laminates now sporting improved resin systems, some OEMs are choosing various flavors of FR-4 instead of high-speed laminates for their high-speed designs—even RF applications. Avoiding overconstraining your materials in high-speed products can lead to considerable cost savings, not to mention a more streamlined trip through fabrication.
The Shaughnessy Report: Unlock Your High-speed Material Constraints
05/15/2024 | Andy Shaughnessy -- Column: The Shaughnessy ReportThe world of PCB materials used to be a fairly simple one. It was divided into two groups: the “traditional” laminates, often called FR-4, and the high-speed laminates developed especially for high-speed PCBs. These were two worlds that usually didn’t collide. But then traditional laminates started getting better, and high-speed designers and design engineers took notice and started to reconsider what FR-4 could be used for.
Breaking High-speed Material Constraints: Design007 Magazine — May 2024
05/14/2024 | I-Connect007 Editorial TeamDo you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems instead of high-speed materials, saving time and money while streamlining the fab process. In the May 2024 issue of Design007 Magazine, our contributors explain how to avoid overconstraining your materials when working with high-speed boards.