Trouble in Your Tank: Implementing Direct Metallization in Advanced Substrate Packaging
It’s Only Common Sense: Storytelling That Sells—Stop Pitching, Start Painting Pictures
The Right Approach: Get Ready for ISO 9001 Version 6
Best Technical Papers at IPC APEX EXPO 2023 Selected
January 16, 2023 | IPCEstimated reading time: 2 minutes
The best technical conference papers of IPC APEX EXPO 2023 have been selected. Voted on through a ballot process by members of the IPC APEX EXPO Technical Program Committee (TPC), the paper authors will be recognized during show opening remarks on Tuesday, January 24.
“All of the papers making up the 2023 IPC APEX EXPO Technical Conference represent the highest quality technical content from authors around the world,” said Stan Rak, co-chair of the TPC. “The diversity of the presenting authors is also impressive: 18 countries are represented by presenting authors. Fifteen authors are next generation—five years or less in the industry -- and 27 presenting authors hold doctoral degrees. The commitment to quality is reflected in this year's selection of Best of Conference, NextGen, and Best Student Research papers. We extend our congratulations to all the award winners."
Taking top honors in the Best of Conference category, the winning papers are:
- “Risk Prediction of Electrochemical Migration on Electronic Control Units – A Practical Approach” by Lothar Henneken, Ph.D., Robert Bosch GmbH. This paper will be presented during Technical Conference Session S25: QRTI-Assembly Risk Prediction and Failure Analysis, on Wednesday, January 25.
- “Root Cause Analysis and Risk Assessment of Multilayer Ceramic Capacitor Flexural Crack Propagating Fault” by Eric Campbell, IBM Corporation. His co-authors are Jennifer Bennett, Jim Bielick, Mehdi Hamid, and Kevin O’Connell, IBM Corporation This paper will be presented during Technical Conference Session S13: QRTI -- Printed Board Reliability, on Wednesday, January 25.
- “High-Resolution Physical Analyses of Microvia-Target Pad Interfaces” by Dr. Martin Leung, Ph.D, The Aerospace Corporation. His co-authors are Scott Sitzman, Eric Frasco, Zachary Lingley, Ph.D., Gary Stupian, Ph.D., James Parke, and Shawn Ashley, The Aerospace Corporation. This paper will be presented during Technical Conference Session S11: HDI1 -- Microvia Analysis and Modeling, on Tuesday, January 24.
The NextGen best paper is awarded to:
- “Temperature Behavior of FR4 Substrates when Processing during Laser Depaneling” by Patrick Stockbruegger, LPKF Laser & Electronics AG. His co-author is Stephan Schmidt, LPKF Laser & Electronics Inc. This paper will be presented during Technical Conference Session S09: A-LASER Assembly Laser Processing, on Tuesday, January 24.
Selected for the Student Research award, the best paper is:
- “Solvent Free Copper Extraction” by Derek Lovejoy, University of Massachusetts/GreenSource Fabrication LLC. This paper will be presented during Technical Conference Session S08: BF-MAT-2 Printed Board Platings and Finishes 2, on Tuesday, January 24.
All technical conference papers were evaluated using a stringent peer review process examining their technical content, originality, test procedures and data used to deduce conclusions, quality of illustrations and the clarity and professionalism of writing as well as value to the industry.
To register for the IPC APEX EXPO technical conference or for more information on all the activities taking place, including professional development courses, exhibition, keynote presentations, networking activities and more, visit www.IPCAPEXEXPO.org.
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Smartphone Production Rises 4% QoQ in 2Q25 as Inventory Adjustment Ends
09/12/2025 | TrendForceTrendForce’s latest investigations reveal that global smartphone production reached 300 million units in 2Q25, up 4% QoQ and 4.8% YoY, driven by seasonal demand and the recovery of brands such as Oppo and Transsion following inventory adjustments.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
09/12/2025 | Marcy LaRont, I-Connect007We may be post-Labor Day, but it is still hot-hot-hot here in the great state of Arizona—much like our news cycles, which have continued to snap, crackle, and pop with eye-raising headlines over this past week. In broader global tech news this week, AI and tariff-type restrictions continues to dominate with NVIDIA raising its voice against U.S. lawmakers pushing chip restrictions, ASML investing in a Dutch AI start-up company to the tune of $1.5 billion, and the UAE joining the ranks of the U.S. and China in embracing “open source” with their technology in hopes of accelerating their AI position.
Delta Electronics Posts 26.7% Growth in Sales Revenues for August
09/12/2025 | Delta ElectronicsDelta Electronics, Inc. announced its consolidated sales revenues for August 2025 totaled NT$47,860 million, a 26.7 percent increase as compared to NT$37,770 million for August 2024 and a 5.4 percent increase as compared to NT$45,397 million for July 2025.
Flex Named to TIME's World's Best Companies List for Third Consecutive Year
09/12/2025 | FlexFlex announced its inclusion on the TIME World's Best Companies 2025 list. This marks the third consecutive year the company was included in this prestigious ranking, which recognizes top-performing companies across the globe.
Advanced Packaging: Preparation is Now
09/15/2025 | Nolan Johnson, I-Connect007In this interview, Matt Kelly, CTO for the Global Electronics Association, and Devan Iyer, chief strategist of advanced packaging, define advanced electronics packaging and the critical nature of getting it right in the electronics manufacturing field. They share details from their white paper, “Advanced Packaging to Board Level Integration—Needs and Challenges,” and provide insight into how next-generation packaging will change the design, fabrication, and assembly of printed circuit boards, including the implications for final system assembly.