-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueWet Process Control
In this issue, we examine wet processes and how to obtain a better degree of control that allows usable data to guide our decisions and produce consistently higher-quality products.
Don’t Just Survive, Thrive
If we are to be relevant and prosper during these next critical decades in electronics, we must do more than survive. As an industry, we can and must thrive. In this issue, our contributors explore these concepts meant to help you take your business to the next level.
Material Matters
Materials management is nuanced, multifaceted, and requires a holistic systems approach for business success. When building high mix, low volume, and high technology, managing materials and overall cost containment are even greater challenges.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
IPC APEX EXPO 2023 Special Session: Advanced Packaging
March 13, 2023 | Pete Starkey, I-Connect007Estimated reading time: 2 minutes
![](https://iconnect007.com/application/files/4216/3125/6526/pete-starkey-300.jpg)
The IPC APEX EXPO Special Session on Advanced Packaging this year attracted enormous interest, with Conference Room 2 at capacity long before the session began. Even with lots of extra seats squeezed around the edges, the session was standing room only for the just-in-time arrivals.
IPC Chief Technology Officer Matt Kelly opened proceedings by introducing a distinguished panel of experts: Jan Vardaman, president and founder of TechSearch International; Sam Salama, CEO of Hyperion Technology; Matt Neely, director of process engineering at TTM Technologies; and Jim Fuller, VP of engineering technology at Sanmina.
In his opening remarks, Kelly reflected upon the changes happening in semiconductor technology, which he believes will noticeably disrupt the industry over the next five to seven years. The declaration “Advanced packaging is the new king!” was attributed to Todd Younkin, president of Semiconductor Research Corporation, speaking at IPC’s Advanced Packaging Symposium [in Washington, D.C.]. According to panelists, “Everything follows silicon” is now a cardinal rule, as global and regional supply-chain shifts advance at different rates in North America, Europe, and Asia. Unfortunately, North America is lagging well behind and urgently needs to catch up to other regions.
Japan leads the way in substrate capability and capacity, followed by South Korea and Taiwan; China is well positioned to support multiple substrate technologies, but North America has minimal capability for flip-chip ball grid array substrates and none for wire-bond integrated circuit substrates.
“We have a lot of work to do,” Kelly said. His call to action stressed that while North America and Europe are talking about these issues, Asia is actually doing something about them, further widening the gap between Asia and the West. Focusing only on silicon, he said, will extend the supply chain rather than shorten it. Substrates and packaging assembly are critical, and the U.S. lacks both build-up substrate capability and package assembly capacity. Overcoming these business and technology issues will require a significant change of mindset.
Kelly highlighted IPC’s commitment to both help build an advanced packaging ecosystem and adopt a “silicon to systems” approach that preserves the importance of the solder joint on the advanced assembly.
Kelly then handed the mic over to Vardaman, who explored the future needs of the IC substrate ecosystem: “Semiconductor fabs are a necessary but not sufficient solution,” she told the group. “A package acts as the interface or intermediary between the chip and the board. You can make all the silicon chips you want, but if you can’t package them, they don’t do you much good. If you don’t invest in the packaging infrastructure in North America, what’s the point of making the chips here if you just send them overseas for assembly?” Echoing Kelly’s earlier message, Vardaman reminded us that such a short-sighted approach will create more problems than it solves: “You have not solved the problem—you’ve lengthened the supply chain instead of shortening it.”
To read this entire article, which appeared in the 2023 edition of Show & Tell Magazine, click here.
Suggested Items
Eutect Overcomes Panel Soldering Challenges with New Gripper
09/06/2024 | Eutect GmbHThe selective soldering of assemblies in panels is not a real challenge. However, if you need to solder relatively large panels with towering components, specialists like those at Eutect GmbH have to step up to the plate.
AIM Solder Appoints Kevin Kwan as Business Development Manager in Asia
09/06/2024 | AIM SolderAIM Solder, a global leader in solder assembly materials for the electronics industry, is thrilled to announce the appointment of Kevin Kwan as Business Development Manager for the Asian market.
Solder Printing: A 1:1 Ratio of Technical and Creative
09/03/2024 | Nolan Johnson -- Column: Nolan's NotesWhen things get technical, I’m in my happy place. It’s why I work in technology in the first place. I also happen to enjoy creative pursuits, and my real happy place is when both happen at the same time. Over the years, it seems that most of us engaged in printed circuit design and manufacturing are similarly wired. I don’t think I’m alone in stating that finding a creative solution to a technical problem is one of the highlights of our workday. We get bonus points if the solution is particularly simple or uncomplicated.
AIM to Present on Ultra-Miniature Assembly for Mini/MicroLEDs at MicroLED Connect
09/03/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming MicroLED Connect Conference and Exhibition taking place September 25-26 in the Conference Center at High Tech Campus Eindhoven in The Netherlands.
STARTEAM GLOBAL Announces Strategic Partnerships with Notion Systems and Peters Group
09/03/2024 | STARTEAM GLOBALSTARTEAM GLOBAL, an established printed circuit board (PCB) manufacturer with over 35 years of expertise, is pleased to announce new strategic partnerships with two German corporations: Notion Systems GmbH, a manufacturer of inkjet printing systems for functional materials, and Lackwerke Peters GmbH & Co. KG, also known as Peters Group, a full-range supplier of coating materials for electronics and PCBs worldwide.