Dan’s Biz Bookshelf: 'This Is Strategy: Make Better Plans'
The Chemical Connection: Reducing Defects in Circuit Board Production
It’s Only Common Sense: Trust Is All You Need
Lean vs. TQM vs. Six Sigma
August 2, 2023 | Steve Williams, The Right Approach Consulting LLCEstimated reading time: 1 minute
Introduction
Lean, Total Quality Management (TQM), and Six Sigma are three popular methodologies used in business and manufacturing sectors to improve processes, increase efficiency, and reduce waste. While they share some similarities, each approach has its unique focus and tools. Here's a comparison of Lean, TQM, and Six Sigma.
The Founding Fathers
Companies like Toyota are often touted (with good reason) as the gold standard for quality system models. Toyota’s TPS (Toyota Production System) has been highly publicized and has gained increasing acceptance in American manufacturing operations over the last decade or so. What has not been highly publicized is the fact that many of these concepts originated in America, and quality pioneers like W. Edwards Deming had to take their show on the road to Japan only after being rejected by the leaders of American industry. The contributions of such legends as Dr. Deming, Dr. Joseph Juran, Philip Crosby, Dr. Kaoru Ishikawa, Dr. Walter Shewhart, and Shigeo Shingo had such an impact on the world that they truly are the Founding Fathers of modern quality.
“We strive to decide our own fate. We act with self-reliance, trusting in our own abilities. We accept responsibility for our conduct and for maintaining and improving the skills that enable us to produce added value.”
–Excerpt from Toyota Motor Corporation’s internal document, “Toyota Way”
Lean
Lean is a methodology and philosophy that originated from the Toyota Production System (TPS) and is widely used in various industries for process improvement and waste reduction. The core principle of Lean is to maximize value for customers by minimizing or eliminating non-value-added activities or waste. The primary focus of Lean is on creating flow and eliminating waste throughout the entire value stream, from the beginning of a process to its end. Waste, also known as "Muda" in Lean terminology, refers to any activity or process step that does not add value from the customer's perspective. Figure 1 illustrates the eight types of wastes identified in Lean Manufacturing.
To read this entire article, which appeared in the July 2023 issue of PCB007 Magazine, click here.
Share on:
Suggested Items
Orbel Corporation Integrates Schmoll Direct Imaging
06/04/2025 | Schmoll AmericaOrbel Corporation in Easton, PA, proudly becomes the first PCM facility in the U.S. equipped with Schmoll’s MDI Direct Imaging system. This installation empowers Orbel to support customers with greater precision and quality.
BAE Systems Unveils Comprehensive Line of M-Code GPS Receivers at Joint Navigation Conference
06/04/2025 | PRNewswireBAE Systems unveiled a diverse line of M-Code Global Positioning System (GPS) receiver solutions at the Joint Navigation Conference in Cincinnati this week, rounding out an extensive line of products that ensure U.S. warfighters have the most dependable GPS systems available across sea, land, and air.
Rehm Thermal Systems Mexico: Ten Years of Growth and Innovation in an Emerging Market
06/03/2025 | Rehm Thermal SystemsOver ten years ago, Luis A. Garcia began his success story at Rehm Thermal Systems. On May 15, 2013, he initially joined as a member of the Rehm USA team.
Indium Joins Virginia Tech Center for Power Electronics Systems Industry Consortium
06/03/2025 | Indium CorporationIndium Corporation®, a leading materials refiner, smelter, manufacturer, and supplier to the global electronics, semiconductor, thin-film, and thermal management markets, has joined Virginia Tech’s Center for Power Electronics Systems (CPES), an industry consortium that supports power electronics initiatives to reduce energy use while growing capability.
UHDI Fundamentals: UHDI Drives Unique IoT Innovation—Smart Homes
06/03/2025 | Anaya Vardya, American Standard CircuitsThe combination of UHDI's high-bandwidth capabilities and IoT's real-time data processing can lead to more efficient, immersive, and smarter IoT systems. This convergence of two revolutionary technologies is enabling quantum advancements in some very “unconventional” applications.