Dan’s Biz Bookshelf: ‘Believe in Better'
The Big Picture: Our Big ‘Why’ in the Age of AI
The Chemical Connection: Through-glass Vias in Glass Substrates
The Past, Present, and Future of IPC-A-610
July 8, 2015 | IPCEstimated reading time: 1 minute
Since 1983, IPC-A-610, Acceptability of Electronic Assemblies, has been the standard used by organizations interested in understanding the acceptability criteria for electronic assemblies around the world.
To understand the ultimate power of IPC-A-610, you need to first understand what is at the core of this standard. IPC-A-610 is a collection of visual quality acceptability requirements for electronic assemblies. It is utilized as a post-assembly acceptance standard to ensure that electronic assemblies meet acceptance requirements.
IPC-A-610 is an essential document in an electronic assembler’s library. Not only is it necessary to have the proper material and tools, but it is also important to have clearly defined acceptance criteria. IPC-A-610 provides that criteria developed and accepted by representatives from some of our industry’s leaders.
Most often, IPC-A-610 is used as a companion document to other standards. While there is much overlap in criteria for these compatible standards, each has a unique purpose. The development and evolution of IPC-A-610 falls largely on a unified task group, which consists of volunteers who often work together on other standards as well. It is because of this that so many standards are able to operate as companion pieces. For example, IPC J-STD-001 is a material and process requirements standard that is critical for use during manufacturing. The volunteers developing these two standards often have synergy meetings where they address changes to both documents at the same time.
Specifically for the ongoing development and maintenance of IPC-A-610, it is an industry consensus document prepared by subject matter experts from the electronics industry. The committee consists of more than 200 volunteers representing their companies, organizations, and interests of the industry. It is a truly collaborative project.
On top of that, IPC-A-610 is a global document, readily able to assist electronic assemblies around the world. For example, previous revisions of IPC-A-610 were translated into as many as 20 languages. This expands the reach of the standard, solidifying its usability in the global market. It is all about sharing knowledge and inspiring growth to create a competitive market within the electronics industry.
To read this article, which appeared in the June 2015 issue of The PCB Design Magazine, click here.
Share on:
Suggested Items
Magnalytix and Foresite to Host Technical Webinar on SIR Testing and Functional Reliability
06/26/2025 | MAGNALYTIXMagnalytix, in collaboration with Foresite Inc., is pleased to announce an upcoming one-hour Webinar Workshop titled “Comparing SIR IPC B-52 to Umpire 41 Functional & SIR Test Method.” This session will be held on July 24, 2025, and is open to professionals in electronics manufacturing, reliability engineering, and process development seeking insights into new testing standards for climatic reliability.
IPC Rebrands as Global Electronics Association: Interview With Dr. John W. Mitchell
06/22/2025 | Marcy LaRont, I-Connect007Today, following a major announcement, IPC is embracing the rapid advancement of technology with a bold decision to change its name to the Global Electronics Association. This name more accurately reflects the full breadth of its work and the modern realities of electronics manufacturing. In this exclusive interview, Global Electronics Association President and CEO Dr. John W. Mitchell shares the story behind the rebrand: Why now, what it means for the industry, and how it aligns with the organization’s mission.
Global Electronics Association Debuts; New Name Elevates IPC’s 70-Year Legacy as Voice of $6 Trillion Electronics Industry
06/25/2025 | Global Electronics AssociationToday begins a new chapter for IPC as it officially becomes the Global Electronics Association, reflecting its role as the voice of the electronics industry. Guided by the vision of “Better electronics for a better world,” the Global Electronics Association (electronics.org) is dedicated to enhancing supply chain resilience and promoting accelerated growth through engagement with more than 3,000 member companies, thousands of partners, and dozens of governments across the globe.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/20/2025 | Andy Shaughnessy, I-Connect007It’s been a busy week in this industry, and we have news and articles from the PCB design, fabrication and assembly communities. Some of this news is out of this world. We may be losing the high ground—the really high ground. Columnist Jesse Vaughan explains how the U.S. seems to be falling behind in space, and how this could affect our ability to defend ourselves in the future. We have an update on the U.S.-China tariff talks, which seem to be moving forward, though sometimes at a snail’s pace.
New IPC VP Joe Schneider Building Stronger Focus on U.S., Canada
06/19/2025 | Marcy LaRont, I-Connect007IPC has hired Joe Schneider as a vice president to strengthen its regional focus and address the specific needs in the U.S. and Canada. Joe brings a rich background in OEM and contract manufacturing, including with industry giants like Siemens and Abbott Laboratories. In this interview, he shares his vision for the region, which emphasizes workforce development and supply chain challenges.