Latest Articles

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

Here in the Northern Hemisphere, we’re now closer to the equinox than to the solstice; change is in the air. Where I live in the Pacific Northwest, we’ve had unseasonably mild and sunny weather, teasing us that spring might be right around the corner. Change is in the air in our news feeds, too. This week, we bring you on-the-grow news from NCAB and Aegis, some market reports on smart manufacturing, and a widely read column on cybersecurity from Mehul Davé. Now that’s something to warm up to.

Finally! A Book About PCB Stackups

‘The Printed Circuit Designer’s Guide to… Stackups: The Design within the Design’ is the latest addition to I-Connect007’s comprehensive, educational library. In this book, brought to readers by Siemens Digital Industries Software and I-007eBooks, author and stackups expert Bill Hargin discusses materials, laminate datasheets, impedance planning, and more. This book provides the reader with a broader understanding of stackup planning and material selection in an effort to comprehend what Hargin calls “the design within the design.”

Real Time with… IPC APEX EXPO 2022: Rigid-Flex Specialists

As flexible circuit specialists growing their world-wide business, Flexible Circuit Technologies is planning to expand its workforce. Chris Clark, senior applications engineer, discusses the company’s 25% growth in the last year, as well as its new plant in Zhuhai, China, which will focus on rigid-flex circuitry. Chris just joined the company in the past year, but he has spent 31 years in the industry wearing whatever hat was required, and he lays out the company’s plans for the next year.

Real Time with… IPC APEX EXPO 2022: High-Tech Rigid-Flex Boards and More

Jeff De Serrano, president of PCB Technologies for North America, and Editor Andy Shaughnessy discuss Jeff’s current quest to acquire a PCB fabrication facility. Just six months into his new position at PCB Technologies, Jeff explains his plans for the next few years, including the company’s focus on rigid-flex boards and their plans to invest heavily into high-tech substrates and microelectronics assembly.

I-Connect007 Editor's Choice: Five Must-Reads for the Week

This week’s picks comprise a potpourri of published articles, a hodgepodge of helpful hints, and a brood of business news. Our collection includes several interviews from IPC APEX EXPO; we filmed over 60 of these video interviews that week, all shot with our new anti-COVID protocol. The boom microphones, selected so that we wouldn’t have to attach clip-on mics to each interviewee, gave our booth/studio an air of 60 Minutes. But unlike what we see in most news shows, almost all the news at IPC APEX EXPO was positive as companies emerge from the pandemic with even more innovative software, services, and equipment than before. It’s looking like 2022 is going to be a really good year.

Real Time with… IPC APEX EXPO 2022: An Additive Printing Solution

Avi Greenberg of Orbotech, a KLA company, discusses how their solutions can help the ICS market and the many manufacturing challenges which impact quality and capacity. The conversation also covers an additive printing solution.

Real Time with… IPC APEX EXPO 2022: The Health of the Electronics Business

If you are interested in the overall health of the electronics business for MAES then you will enjoy this interview with Joe D'Ambrisi of MacDermid Alpha. This interview is conducted by Pete Starkey, and it also covers the recent Electrolube integration. If you were unable to attend IPC APEX EXPO 2022, don't worry. We're bringing you coverage of the week's events in San Diego, from ribbon cutting to teardown.

Real Time with… IPC APEX EXPO 2022: The Supply Chain and Markets

Pete Starkey interviews Mark Goodwin, COO of Ventec International, on the impact of the current supply chain condition. Their conversation also covers aerospace and the U.S. market. If you were unable to attend IPC APEX EXPO 2022, don't worry. We're bringing you coverage of the week's events in San Diego, from ribbon cutting to teardown.

Real Time with… IPC APEX EXPO 2022: A New Direct Imaging System

Sylvain Dromaint of Altix gives Pete Starkey an update on the recent launch of their ADIX DUO direct imaging system and how it fits into the company’s roadmap. If you were unable to attend IPC APEX EXPO 2022, don't worry. We're bringing you coverage of the week's events in San D+iego, from ribbon cutting to teardown.

Real Time with… IPC APEX EXPO 2022: Pluritec Expands Product Offerings

Lino Sousa, Vice President of Pluritec, speaks with Pete Starkey about their expansion into wet processing and spray coating, new process line integration solutions. If you were unable to attend IPC APEX EXPO 2022, don't worry. We're bringing you coverage of the week's events in San Diego, from ribbon cutting to teardown.

Real Time with… IPC APEX EXPO 2022: Electronics Coating Quality Control

Dean Schmidt of Hitachi High-Tech Analytical Science talks with Nolan Johnson about the increasing need for more in-line automation for electronics manufacturers and the role that coatings analysis plays in this.If you were unable to attend IPC APEX EXPO 2022, don't worry. We're bringing you coverage of the week's events in San Diego, from ribbon cutting to teardown.

Real Time with... IPC APEX EXPO 2022: Latest Trends in PCB Manufacturing Equipment

Torsten Reckert, president of all4-PCB, discusses their product lines with Andy Shaughnessy, I-Connect007 editor. In this conversation, they look at the latest trends and requirements from the industry. If you were unable to attend IPC APEX EXPO, don't worry. We're bringing you coverage of the week's events in San Diego, from ribbon cutting to teardown.

Real Time with... IPC APEX EXPO 2022: With Laser Focus

Stephan Schmidt of LPKF Laser & Electronics, along with guest editor Steve Williams, looks at why, with new technologies, more applications are migrating to laser depaneling and away from traditional singulation methods as cost drops and performance increases. If you were unable to attend IPC APEX EXPO, don't worry. We're bringing you coverage of the week's events in San Diego, from ribbon cutting to teardown.

Real Time with... IPC APEX EXPO 2022: New Materials for Additive Manufacturing

Trevor Polidore of Rogers Corporation and I-Connect007 Guest Editor Tara Dunn discuss the introduction of the new Rogers materials designed for use in 3D printing. They also look at the trends and challenges in materials for additive and semi-additive manufacturing. If you were unable to attend IPC APEX EXPO, don't worry. We're bringing you coverage of the week's events in San Diego, from ribbon cutting to teardown.

Real Time with... IPC APEX EXPO 2022: Advanced Packaging Report

Matt Kelly, chief technologist at IPC, provides a quick assessment of IPC APEX EXPO 2022 as of end-of-day Wednesday. Matt reviews the technical programs and shares his thoughts on the importance of the continued evolution of the Factory of the Future. If you were unable to attend IPC APEX EXPO, don't worry. We're bringing you coverage of the week's events in San Diego, from ribbon cutting to teardown.

Real Time with... IPC APEX EXPO 2022: Continuous Supply Chain

Nolan Johnson talks with North American distributor Shawn Stone of International Electronic Components (IEC) about their strategies for maintaining a continuous supply chain in the PCB industry. This doesn't look like a problem that's likely to go away anytime soon, and Shawn offers his thoughts on how his company is managing the solution. If you were unable to attend IPC APEX EXPO, don't worry. We're bringing you coverage of the week's events in San Diego, from ribbon cutting to teardown.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

The last time I was in this space, we were busy preparing for our extensive coverage of IPC APEX EXPO, so now I have the honors of compiling the news from the week following the event. We often use the phrase “busy news week” in these compendiums, but this week I have metrics—25% more news items published this week at I-Connect007 than our weekly average. All the more reason to read the website newsfeeds and newsletters, but also all the more reason for me to bring you the best of the best from the past week.

Real Time with... IPC APEX EXPO 2022: Selecting the Right Base Material

Steven Sekanina, Isola’s director of High Speed Digital Products, helps launch their new book, “The Printed Circuit Designer’s Guide to… High Performance Materials.” Editor Andy Shaughnessy sat down with Steven to discuss the importance of selecting the right base material for your printed circuit board, and the criteria to consider when choosing high-speed PCB laminates. If you didn't make it to IPC APEX EXPO, don't worry. We're bringing you coverage of the week's events in San Diego, from ribbon cutting to teardown.

Real Time with... IPC APEX EXPO 2022: Industry Icons Reflect

In this special interview, industry icons Technical Editor Happy Holden and Dick Crowe of Burkle North America reflect on and share a historical perspective from their many years in the industry. Dick also announced his retirement after nearly 60 years in the industry, and he discusses his plans for the future. If you didn't make it to IPC APEX EXPO 2022, don't worry. We're bringing you coverage of the week's events in San Diego, from ribbon cutting to teardown.

Real Time with... IPC APEX EXPO: Fire Up the Inkjets

Technical Editor Pete Starkey sits down with Don Monn of Taiyo America to discuss the benefits of inkjet solder mask and how it helps streamline the manufacturing process. They also discuss the recent acquisition of Circuit Automation, a manufacturer of solder mask coating and vertical drying equipment. If you didn't make it to IPC APEX EXPO, don't worry. We're bringing you coverage of the week's events in San Diego, from ribbon cutting to teardown.

Real Time with... IPC APEX EXPO: Update From PCBAA

PCBAA Chairman Travis Kelly sits down with Nolan Johnson to discuss the new association’s recent activities and plans for the future. The Printed Circuit Board Association of America is focused on advocating for manufacturing in America. If you didn't make it to IPC APEX EXPO, don't worry. We're bringing you coverage of the week's events in San Diego, from ribbon cutting to teardown.

Real Time with... IPC APEX EXPO: Advocacy in Washington

Editor Nolan Johnson sits down for an interview with Chris Mitchell, Vice President of Global Government Relations at IPC. They discuss the industry's advocacy in Washington to educate Congress on our key issues, as well as the growth in global advocacy by IPC. If you didn't make it to IPC APEX EXPO, don't worry. We're bringing you coverage of the week's events in San Diego, from ribbon cutting to teardown.

Real Time with... IPC APEX EXPO: John Mitchell Shares Thoughts on the Show

John W. Mitchell, president and CEO of IPC, shares his thoughts with Barry Matties about the return of the in-person IPC APEX EXPO after a two-year hiatus. Watch this interview or view it on our show page. If you didn't make it to IPC APEX EXPO, don't worry. We're bringing you coverage of the week's events, from ribbon cutting to teardown.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

We just wrapped up IPC APEX EXPO 2022, and I think it went better than anyone could have expected. I wasn’t sure the live show would actually take place. With the COVID protocols in California changing daily, no one knew for sure that a live show would even be allowed to open. But here's my picks for the week, both from the show and from the industry.

Real Time with... IPC APEX EXPO: PCB Manufacturing Today

Dick Crowe speaks with Kurt Palmer, president of Burkle North America, about the trends he sees in PCB manufacturing today. From LDI to laser drills, they discuss a wide range of concerns and opportunities. If you didn't make it to IPC APEX EXPO, don't worry. We're bringing you coverage of the week's events, from ribbon cutting to teardown.
Subscribe | Magazines | RealTime with | JobConnect007 | Education | Webinars
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in