Sketching Out Magnetism with Electricity
January 13, 2017 | SLAC National Accelerator LaboratoryEstimated reading time: 3 minutes
In a proof-of-concept study published in Nature Physics, researchers drew magnetic squares in a nonmagnetic material with an electrified pen and then “read” this magnetic doodle with X-rays.
In the experiment, the scientists moved the electric tip along the surface and applied a positive voltage. The electric field aligns the spins of the electrons in the nonmagnetic material, and the ordering creates magnetic properties. If the voltage is reversed, the spins once again become disordered and magnetism is lost. The researchers were able to see the changes using X-ray microscopy at the Stanford Synchrotron Radiation Lightsource. (SLAC National Accelerator Laboratory)
The experiment demonstrated that magnetic properties can be created and annihilated in a nonmagnetic material with precise application of an electric field – something long sought by scientists looking for a better way to store and retrieve information on hard drives and other magnetic memory devices. The research took place at the Department of Energy’s SLAC National Accelerator Laboratory and the Korea Advanced Institute of Science and Technology.
“The important thing is that it’s reversible. Changing the voltage of the applied electric field demagnetizes the material again,” said Hendrik Ohldag, a co-author on the paper and scientist at the lab’s Stanford Synchrotron Radiation Lightsource (SSRL), a DOE Office of Science User Facility.
“That means this technique could be used to design new types of memory storage devices with additional layers of information that can be turned on and off with an electric field, rather than the magnetic fields used today,” Ohldag said. “This would allow more targeted control, and would be less likely to cause unwanted effects in surrounding magnetic areas.”
“This experimental finding is important for overcoming the current difficulties in storage applications,” said Jun-Sik Lee, a SLAC staff scientist and one of the leaders of the experiment. “We can now make a definitive statement: This approach can be implemented to design future storage devices.”
Lining Up the Spins
A material's magnetic properties are determined by the orientation of the electrons’ spins. In ferromagnetic materials, found in hard drives, refrigerator magnets and compass needles, all the electron spins are lined up in the same direction. These spins can be manipulated by applying a magnetic field – flipping them from north to south, for instance, to store information as ones and zeroes.
Scientists have also been trying different ways to create a “multiferroic state,” where magnetism can be manipulated with an electrical field.
“This has become one of the Holy Grails of technology over the past decade,” Ohldag said. “There are studies that have shown aspects of this multiferroic state before. The novelty here is that by designing a particular material, we managed to both create and eliminate magnetism in a controlled fashion on the nanoscale.”
Crosstalk Between Electricity and Magnetism
In this study, the team started with an antiferromagnetic material – one that has small patches of magnetism that cancel each other out, so that overall it doesn’t act like a magnet.
Both antiferromagnets and ferromagnets show magnetic properties only below a certain temperature, and above that temperature they become non-magnetic.
By designing an antiferromagnetic material doped with the element lanthanum, the researchers found they could tune the properties of the material in such a way that electricity and magnetism could influence each other at room temperature. They could then flip the magnetic properties with an electrical field.
To see these changes, they tuned a scanning transmission X-ray microscope at SSRL so it could detect the magnetic spin of the electrons. The X-ray images confirmed that the magnetization had occurred, and was truly reversible.
Next, the research team would like to test other materials, to see if they can find a way to make the effect even more pronounced.
The research team included scientists from the Korea Institute of Materials Science, Pohang University of Science and Technology, Pohang National Accelerator Laboratory, Max Planck Institute for Chemical Physics of Solids and the University of New South Wales of Australia.
Suggested Items
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.
Real Time with... IPC APEX EXPO 2024: Adhesive Materials and Equipment Update with Dymax
05/01/2024 | Real Time with...IPC APEX EXPOVirginia Hogan, global business development manager at Dymax, discusses adhesive materials, dispensing and curing equipment, a new, high-reliability conformal coating, and various materials and dispensing methods.
Real Time with... IPC APEX EXPO 2024: Sustainability in the Industry
04/26/2024 | Real Time with...IPC APEX EXPOGuest Editor Henry Crandall and Chris Nash of Indium Corporation discuss the company's 90th anniversary and its focus on sustainability. They focus on the benefits of sustainable materials, their compatibility, and value propositions. The conversation also highlights how Durafuse LT technology's role in reducing reflow temperatures is leading to significant cost and energy savings. Nash also touches on downstream sustainability efforts such as using recycled materials for packaging.
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.