It’s Only Common Sense: Invest in Yourself—You’re Your Most Important Resource
Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
Matrix USA to Display Full Product Line at IPC APEX 2017
January 23, 2017 | Matrix USA Inc.Estimated reading time: 1 minute
Matrix USA invites all PCB industry fabricators to Booth #3701 at the 2017 IPC APEX Expo in San Diego, CA starting February 14. Matrix will be featuring the latest circuit board materials from industry-leading suppliers, including:
- PANASONIC multilayer & flex laminates such as Megtron 7, Megtron 4S, and Felios Flex (LCP). All materials will be displayed with full technical features with qualified personnel on hand to discuss applications.
- JINZHOU drills, routers, endmills and the PERFECT POINT drill repointing service
- ACF Supported copper foils, made with CIRCUIT FOIL high quality ED copper foils
- KINGBOARD Rigid Laminates including KB6167F (Tg 175 °C), KB6160A (Tg 135 °C) and KB6164F (Tg 140 °C).
- HAKUTO Auto Dry Film Lamination
Matrix will also have a full option next generation Hakuto Mach 6630NP auto dry film laminator on display at the show featuring,
- The NEW even heat and even pressure module
- Quick change lamination rolls
- Cassette loading of dry film (off-line)
- Enclosed cabinet to minimize contaminates
- Stationary Film Loading Bay
- And more…
Visit Matrix at the IPC APEX Expo to speak with one of their technical professionals and learn more about all of their product offerings in Booth 3701.
About Matrix USA Inc.
Committed to the motto, “Quality Products, Dependable People”, Matrix was established in 1977 with the objective of providing quality raw materials to the North American Printed Circuit Board Industry. Matrix has four rapid-response warehouses located throughout the US and Canada that fulfill high quality, fast delivery, and custom orders daily. For further information, click here.
Share on:
Suggested Items
Fresh PCB Concepts: PCB Design Essentials for Electric Vehicle Charging
11/27/2024 | Team NCAB -- Column: Fresh PCB ConceptsElectric vehicles (EVs), powered by electricity rather than fossil fuels, are transforming transportation and reducing environmental impacts. But what good is an EV if it can't be easily charged? In this month's column, Ramon Roche dives into the role of printed circuit boards (PCBs) in electric vehicle charging (EVC)—and the design considerations.
Unlocking Advanced Circuitry Through Liquid Metal Ink
10/31/2024 | I-Connect007 Editorial TeamPCB UHDI technologist John Johnson of American Standard Circuits discusses the evolving landscape of electronics manufacturing and the critical role of innovation, specifically liquid metal ink technology, as an alternate process to traditional metallization in PCB fabrication to achieve ever finer features and tighter tolerances. The discussion highlights the benefits of reliability, efficiency, and yields as a tradeoff to any increased cost to run the process. As this technology becomes better understood and accepted, even sought out by customers and designers, John says there is a move toward mainstream incorporation.
Fresh PCB Concepts: The Critical Nature of Copper Thickness on PCBs
10/31/2024 | Team NCAB -- Column: Fresh PCB ConceptsPCBs are the backbone of modern electronics and the copper layers within these boards serve as the primary pathways for electrical signals. When designing and manufacturing PCBs, copper thickness is one of the most critical factors and significantly affects the board’s performance and durability. The IPC-6012F specification, the industry standard for the performance and qualification of rigid PCBs, sets clear guidelines on copper thickness to ensure reliability in different environments and applications.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
The Cost-Benefit Analysis of Direct Metallization
10/21/2024 | Carmichael Gugliotti, MacDermid AlphaCarmichael Gugliotti of MacDermid Alpha discusses the innovative realm of direct metallization technology, its numerous applications, and significant advantages over traditional processes. Carmichael offers an in-depth look at how direct metallization, through developments such as Blackhole and Shadow, is revolutionizing PCB manufacturing by enhancing efficiency, sustainability, and cost-effectiveness. From its origins in the 1980s to its application in cutting-edge, high-density interconnects and its pivotal role in sustainability, this discussion sheds light on how direct metallization shapes the future of PCB manufacturing across various industries, including automotive, consumer electronics, and beyond.
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in