Iodine May Protect Batteries
March 9, 2017 | MITEstimated reading time: 1 minute
Researchers at MIT and Carnegie Mellon University are studying a new kind of electrolyte for “self-healing” lithium battery cells, which will be formed by adding a halide element such as iodine, under a grant from the U.S. Department of Energy’s Office of Efficiency and Renewable Energy. The work could lead to longer driving range, lower cost electric vehicle batteries.
MIT’s Kyocera Professor of Materials Science and Engineering Yet-Ming Chiang and Carnegie Mellon University assistant professor of mechanical engineering Venkat Viswanathan received first-year funding of $456,742 through Sept. 30. The project has the potential to receive up to $1.25 million over three years.
“One of the most promising pathways to higher energy density vehicle batteries is to use metal electrodes such as lithium. However, to do so requires that we solve a problem first recognized 40 years ago. Even though lithium metal has been widely used in disposable batteries, it has not been possible to use them in batteries that undergo repeated charging,” Chiang says.
Through a combination of computer modeling work at CMU and experimental tests at MIT, the researchers hope to show that halide-enriched battery cells can electrochemically form a lithium-halide-based solid electrolyte to protect lithium metal electrodes. Electrolytes are the barrier through which the active elements of a battery, for example, lithium ions, cycle back and forth between a positive electrode and a negative electrode.
The researchers hope the combination of a lithium-halide solid electrolyte with lithium metal negative electrodes will slow or prevent the buildup of icicle-like metal filaments, known as “dendrites,” that build up on the metal electrode. This unwanted buildup eventually leads to battery failure. The researchers believe the iodine-enhanced electrolyte may offer a “self-healing” process that protects the electrode from sprouting these dendrites. Under this project, they will develop prototype batteries, whose performance can be compared to similar lithium batteries without halide additives.
MIT postdoc Linsen Li and undergraduate senior Harry Thaman are working on the MIT portion of the project.
The project is one of 35 that the U.S. Department of Energy selected last year to develop advanced vehicle batteries and electric drive systems.
Suggested Items
Water Management in a Large Printed Circuit Board Manufacturer
04/15/2024 | Charles Nehrig, TTM TechnologiesTTM’s environmental management is grounded in its Environmental Statement and Environmental Policy, which promote measures that make for a more responsible environmental management process. Our management system helps TTM work toward minimizing its environmental footprint and increasing the sustainability of its operations. TTM monitors its environmental performance just as it monitors its operational performance, and provides the resources required to adhere to the Company’s environmental responsibilities.
Happy’s Tech Talk #27: Integrated Mesh Power System (IMPS) for PCBs
04/08/2024 | Happy Holden -- Column: Happy’s Tech TalkA significant decrease in HDI substrate production cost can be achieved by reducing the number of substrate layers from conventional through-hole multilayers and microvia multilayers of eight, 10, 12, and more to only two layers. Besides reducing direct processing steps, the yield will increase as defect-producing operations are eliminated. The integrated mesh power system (IMPS) was invented in the latter years of MCM-D use for thin-film fabrication. Those geometries fit today into our use of ultra HDI.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
Indium Corporation Experts to Present at SEMI THERM
03/07/2024 | Indium CorporationIndium Corporation Global Account Manager and Senior Thermal Technologist Tim Jensen and Product Development Specialist for Thermal Interface Materials Miloš Lazić will present on thermal interface material (TIM) technology at SEMI-THERM, taking place March 25–28 in San Jose, California, U.S.
Indium Corporation to Showcase Proven EV Products and High-Reliability Alloys at Productronica China
02/28/2024 | Indium CorporationAs a materials pioneer and trusted partner in electric vehicle (EV) and e-Mobility manufacturing, Indium Corporation is proud to showcase its high-reliability alloys and soldering solutions at Productronica China, March 20-22, in Shanghai.