Fresh PCB Concepts: Key Considerations for Reliability, Performance, and Compliance in PCBs
Elementary Mr. Watson: Navigating RF—A Glide Path Approach to Design Success
Designers Notebook: Layer Stackup Planning for RF Circuit Boards
iCD Adds Coplanar Waveguide Planner to iCD Design Integrity Software
March 15, 2017 | Barry Olney, In-Circuit DesignEstimated reading time: 1 minute
In-Circuit Design Pty Ltd (iCD), Australia, developer of the iCD Design Integrity software, has released the new iCD CPW Planner to be incorporated as part of the 2017 release of its suite of high-speed PCB design tools.
“Coplanar waveguides (CPWs) have been used for many years in RF and microwave design as they reduce radiation loss, at extremely high frequencies, compared to traditional microstrip. And now, as edge rates continue to rise, they are coming back into vogue,” said Barry Olney, CEO of iCD. “Today’s high-speed, fast rise-time serial interfaces are prone to excess loss, in the transmission lines, which is a major cause of signal integrity issues. Minimizing this loss reduces jitter and improves the bit error rate (BER) and inter-symbol interference (ISI).”
The CPW offers several advantages over a conventional microstrip transmission line:
- Simplifies fabrication.
- Facilitates easy shunt as well as series surface mounting of active and passive devices.
- Can eliminate the need for via holes and wraparound edge plating.
- Reduces radiation loss at very high microwave frequencies.
Furthermore, the impedance is determined by the ratio of trace width to clearance, so size reduction is possible without limit, the only penalty being higher losses.
“The new iCD CPW Planner has five popular generic CPW structures that model single and dual (differential) CPWs, with and without ground reference planes, plus a dual Coplanar Strip (CPS) which has no ground reference plane or copper pours. Materials maybe inserted, from the extensive iCD Dielectric Materials Library featuring over 30,850 rigid and flexible materials up to 100GHz, to dramatically increase accuracy at extremely high microwave frequencies,” said Olney.
Click here for a quick demonstration video of the iCD Coplanar Waveguide Planner.
About In-Circuit Design Pty Ltd
In-Circuit Design Pty Ltd, based in Australia, developer of the iCD Design Integrity software incorporating the iCD Stackup, PDN and CPW Planner software, is a PCB Design Service Bureau and specialist in board level simulation. For further information or to download a free evaluation of the software, please visit www.icd.com.au.
Share on:
Suggested Items
RF PCB Design Tips and Tricks
05/08/2025 | Cherie Litson, EPTAC MIT CID/CID+There are many great books, videos, and information online about designing PCBs for RF circuits. A few of my favorite RF sources are Hans Rosenberg, Stephen Chavez, and Rick Hartley, but there are many more. These PCB design engineers have a very good perspective on what it takes to take an RF design from schematic concept to PCB layout.
Elephantech: For a Greener Tomorrow
04/16/2025 | Marcy LaRont, PCB007 MagazineNobuhiko Okamoto is the global sales and marketing manager for Elephantech Inc., a Japanese startup with a vision to make electronics more sustainable. The company is developing a metal inkjet technology that can print directly on the substrate and then give it a copper thickness by plating. In this interview, he discusses this novel technology's environmental advantages, as well as its potential benefits for the PCB manufacturing and semiconductor packaging segments.
Trouble in Your Tank: Organic Addition Agents in Electrolytic Copper Plating
04/15/2025 | Michael Carano -- Column: Trouble in Your TankThere are numerous factors at play in the science of electroplating or, as most often called, electrolytic plating. One critical element is the use of organic addition agents and their role in copper plating. The function and use of these chemical compounds will be explored in more detail.
IDTechEx Highlights Recyclable Materials for PCBs
04/10/2025 | IDTechExConventional printed circuit board (PCB) manufacturing is wasteful, harmful to the environment and energy intensive. This can be mitigated by the implementation of new recyclable materials and technologies, which have the potential to revolutionize electronics manufacturing.
Connect the Dots: Stop Killing Your Yield—The Hidden Cost of Design Oversights
04/03/2025 | Matt Stevenson -- Column: Connect the DotsI’ve been in this industry long enough to recognize red flags in PCB designs. When designers send over PCBs that look great on the computer screen but have hidden flaws, it can lead to manufacturing problems. I have seen this happen too often: manufacturing delays, yield losses, and designers asking, “Why didn’t anyone tell me sooner?” Here’s the thing: Minor design improvements can greatly impact manufacturing yield, and design oversights can lead to expensive bottlenecks. Here’s how to find the hidden flaws in a design and avoid disaster.