NREL’s Quantum Dot Research Yields Greater Control
May 18, 2017 | NRELEstimated reading time: 2 minutes
Researchers at the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) have developed new designer quantum dot systems with greater control over beneficial properties for photoelectrochemical and photovoltaic solar applications.
NREL researcher Dan Kroupa, working in a glove box, is performing ligand exchanges on PbS quantum dot samples. He is a co-author of the paper "Tuning Colloidal Quantum Dot Band Edge Positions through Solution-Phase Surface Chemistry Modification.” Photo by Dennis Schroeder, NREL
The scientists were able to chemically modify lead sulfide (PbS) quantum dot surfaces so that their ionization energy-- the amount of energy needed to remove a single electron from the solid--could be varied systematically from 6.5 eV to 4.1 eV (greater than a 2 eV change).
"What we showed here with quantum dots is they can be very flexible chemical systems. You can tune their ionization energy over a very large range of values in a very systematic way," said Matthew Beard, a senior scientist within NREL's Chemical and Biosciences Center and lead author of a new paper in Nature Communications, Tuning colloidal quantum dot band edge positions through solution-phase surface chemistry modification.
Beard's NREL co-authors are Daniel Kroupa, Elisa Miller, Jing Gu, and Arthur Nozik. They were joined by University of Chicago researchers Marton Voros and Giulia Galli and Brett McNichols and Alan Sellinger from the Colorado School of Mines.
Quantum dots (QDs) are considered to be pseudo-atoms that have highly tunable opto-electronic properties. Researchers are studying films of QDs as functional solids in a variety of applications, including solar cells and solar photoelectrochemical cells. The ionization energy of a typical solid is determined from the constituent atoms and, in general, cannot be modified. In QD solids, however, the ionization energy, as well as other beneficial opto-electronic properties, can be modified in controlled and rational ways. Their work presents clear design rules for tuning the ionization energy over a large range of values.
NREL's research also established the fundamental principles that govern the relationship between a quantum dot and ligand, which are organic molecules attached to the surfaces of a QD. Prior studies have shown that modifying the interface between a PbS QD and a ligand produces different chemical systems, but a clear and quantitative relationship hasn't been reported until now.
NREL researchers worked with seven specific ligands, chosen from a field of more than 500 possibilities. Knowing the specific design rules allows for rational design of functional semiconductor systems. "You can really dial in the properties you want," Beard said.
The research was funded by the Office of Science within the U.S. Department of Energy.
NREL is the U.S. Department of Energy's primary national laboratory for renewable energy and energy efficiency research and development. NREL is operated for the Energy Department by The Alliance for Sustainable Energy, LLC.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
Synopsys, Samsung Electronics Collaborate to Achieve First Production Tapeout of Flagship Mobile CPU
05/03/2024 | PRNewswireSynopsys, Inc. announced that Samsung Electronics has achieved successful production tapeout for its high-performance mobile SoC design, including flagship CPUs and GPUs, with 300MHz higher performance using Synopsys.ai™ full stack AI-driven EDA suite and a broad portfolio of Synopsys IP on Samsung Foundry's latest Gate-All-Around (GAA) process technologies.
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/03/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.
Real Time with… IPC APEX EXPO 2024: Software Solutions for Circuit Board Challenges
05/03/2024 | Real Time with...IPC APEX EXPONolan Johnson speaks with Will Webb from Aster Technologies about their software solutions for design teams, manufacturing, test engineers, and process engineers. Aster's software addresses the increasing complexities of circuit boards and the need for alternative testing methods.
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.