Trouble in Your Tank: Can You Drill the Perfect Hole?
It’s Only Common Sense: Your Guide to Better Time Management
Dan's Biz Bookshelf: 'Move Your Bus'
A Brief Tutorial on Embedded Capacitors
June 26, 2017 | Jesse Ward, COMPUNETICS, INC.Estimated reading time: Less than a minute
Introduction
Compunetics has been operating in the embedded components market for more than 20 years. Initially driven by their parent company’s need for high layer-count, high-density embedded capacitance cards for their OEM product offerings, technology and processes were developed which are mature and reliable. Embedded technology is integrated into PCBs using conventional processing techniques; the capacitive layers are drop-in replacements in the existing PCB stack. However, special processing is required to properly transport the extremely thin cores associated with embedded capacitance layers (three to 25 microns thick).
Embedded capacitors rely on utilization of planar copper-clad, thin-core laminate (Figure 1). These laminates replace decoupling capacitors which are normally mounted next to an IC. The IC is routed directly to the capacitive layer using vias. The laminates are drop-in replacements that use the existing PCB stack-up. Various dielectrics and core thicknesses are available. For example, DuPont HK04 material utilizes a 1-mil copper-clad polyimide core which functions as an ideal capacitor (Figure 2).
To read the full version of this article which appeared in the June 2017 issue of The PCB Magazine.
Share on:
Suggested Items
Trouble in Your Tank: Can You Drill the Perfect Hole?
07/07/2025 | Michael Carano -- Column: Trouble in Your TankIn the movie “Friday Night Lights,” the head football coach (played by Billy Bob Thornton) addresses his high school football team on a hot day in August in West Texas. He asks his players one question: “Can you be perfect?” That is an interesting question, in football and the printed circuit board fabrication world, where being perfect is somewhat elusive. When it comes to mechanical drilling and via formation, can you drill the perfect hole time after time?
The Evolution of Picosecond Laser Drilling
06/19/2025 | Marcy LaRont, PCB007 MagazineIs it hard to imagine a single laser pulse reduced not only from nanoseconds to picoseconds in its pulse duration, but even to femtoseconds? Well, buckle up because it seems we are there. In this interview, Dr. Stefan Rung, technical director of laser machines at Schmoll Maschinen GmbH, traces the technology trajectory of the laser drill from the CO2 laser to cutting-edge picosecond and hybrid laser drilling systems, highlighting the benefits and limitations of each method, and demonstrating how laser innovations are shaping the future of PCB fabrication.
Day 2: More Cutting-edge Insights at the EIPC Summer Conference
06/18/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) summer conference took place this year in Edinburgh, Scotland, June 3-4. This is the third of three articles on the conference. The other two cover Day 1’s sessions and the opening keynote speech. Below is a recap of the second day’s sessions.
Day 1: Cutting Edge Insights at the EIPC Summer Conference
06/17/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) Summer Conference took place this year in Edinburgh, Scotland, June 3-4. This is the second of three articles on the conference. The other two cover the keynote speeches and Day 2 of the technical conference. Below is a recap of the first day’s sessions.
Preventing Surface Prep Defects and Ensuring Reliability
06/10/2025 | Marcy LaRont, PCB007 MagazineIn printed circuit board (PCB) fabrication, surface preparation is a critical process that ensures strong adhesion, reliable plating, and long-term product performance. Without proper surface treatment, manufacturers may encounter defects such as delamination, poor solder mask adhesion, and plating failures. This article examines key surface preparation techniques, common defects resulting from improper processes, and real-world case studies that illustrate best practices.