Researchers Seek to Improve Quality Control for Nanomanufacturing
April 3, 2018 | University of HoustonEstimated reading time: 1 minute
Researchers from the University of Houston are developing a new quality control tool for continuous nanomanufacturing, a key step in moving nanodevices from the lab to the real world.
"Nanomanufacturing sounds great, but it really has to be scalable," said Venkat Selvamanickam, MD Anderson Chair Professor of Mechanical Engineering. "You have to be able to control the quality."
Selvamanickam is working with Nanomanufacturing Systems for mobile Computing and Energy Technologies (NASCENT), a multi-institution partnership led by the University of Texas at Austin, to develop the new tool, which will adapt Raman Spectroscopy and X-ray Diffraction for use with roll-to-roll continuous manufacturing processes.
The work will be done under the auspices of the UH Advanced Manufacturing Institute; UH will receive about $340,000 from the National Science Foundation for the project.
One of the world's leading experts on manufacturing superconductors, Selvamanickam oversees manufacturing activity at the University's Energy Research Park, including the advanced manufacturing of high-performance superconductor wires for next-generation electric machines. He is also director of the Applied Research Hub at the Texas Center for Superconductivity at UH and manages the Advanced Manufacturing Institute, an umbrella organization designed to help researchers make the leap between discovery and commercialization.
NASCENT, an NSF-funded Engineering Research Center, addresses issues limiting high-volume nanomanufacturing. Selvamanickam said one critical problem is ensuring quality control during the manufacturing process, rather than waiting until the device or product has been produced to check for imperfections or other problems.
The goal is an innovative tool that can provide continuous monitoring as production rolls past. "The challenge is, can you detect imperfections at fast speed and good resolution?" Selvamanickam said. "You can't be spending minutes examining the material, because the material is flying by at high speed."
To work, the tool will have to detect imperfections within seconds or less.
Selvamanickam's lab currently produces solar cells, flexible electronics and superconducting wires using roll-to-roll manufacturing, the same process NASCENT is pursuing.
While the tool initially will be tested on the manufacture of common semiconductors, including silicon and gallium-arsenide, Selvamanickam said it will then be adapted for additional materials.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.