-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Cadence’s Sigrity Automates Power Integrity Simulation Earlier in Design Cycle
April 4, 2018 | Kelly Dack, CID+, EPTACEstimated reading time: 3 minutes
DesignCon is always a great place to check out the latest PCB layout and simulation software tools. During DesignCon 2018, I met with Sam Chitwood, a product engineer with Cadence. Sam explained how the Cadence Sigrity simulation software now allows users to make decisions early in the design process, and how this can help optimize the design of the power delivery network and ensure signal integrity in complex PCBs.
Kelly Dack: I’m here at DesignCon with Sam Chitwood. I understand that the Sigrity tools now address some power integrity methodology issues. Why don’t we start talking about power integrity by defining some of the problems that designers and engineers are facing?
Sam Chitwood: Power integrity has two different aspects, DC and AC. The first requirement is fundamentally supplying sufficient DC power to a device. Just like any mobile electronic device you’ve used in the past, you must have a battery—a DC power supply. DC issues can stem from a combination of high currents and insufficient routing metal.
AC power integrity can be considered from both the frequency and time domains. In the frequency domain, we strive for a flat impedance profile across the bandwidth of interest. In the time domain, consider the example of many I/Os that are switching. If their power source isn’t stable because it has a large amount of noise, that noise will manifest itself on those outputs as signal degradation. This phenomenon is known as simultaneous switching noise, or SSN, and shows how power integrity problems can cause signal integrity problems. Sigrity tools are special in that they can simulate signal, power, and ground together in both time and frequency domains.
Dack: Can simulation happen on the front end or the back end or both? Tell us where it’s best used.
Chitwood: Historically, most power integrity simulation have been post-layout, towards the end of a design cycle. And obviously, that’s where no one wants to be. Everyone is always running out of time, and there is almost never enough time to perform optimizations or a cost reduction. PI engineers barely have enough time to perform a signoff analysis to judge “pass or fail.”
What we’ve really tried to do over the past two years is what my colleague Brad Griffin likes to call “shift left.” That is, how can we move any type of analysis earlier—to the left—into the design cycle? Here is one example from a schematic point of view: Do you have enough decoupling capacitors on a rail? Do you have the correct decoupling capacitors on a rail? Most schematic designers today cannot answer those questions. Our goal has been to take what has historically only been done at the end-of-design cycle, a PI expert with barely enough time to do a check, and enable design engineers and layout engineers to assist much earlier. How can they participate?
Dack: Upstream, to me, means possibly the schematic level.
Chitwood: Yes, the goal is enabling schematic designers from the very beginning. This person needs an automated way of putting together something that is very simple and very quick but gives useful and actionable information. For example, have the correct decaps been selected? The schematic designer needs that information at the beginning, rather than have the PI expert at the very end say, “Oh, well, you had the wrong decaps all along.” Now you have to go back and rip this out, and it can be as bad as literally starting over from your power delivery routing point of view. Obviously, that’s tremendously expensive.
To read this entire interview, which appeared in the March 2018 issue of Design007 Magazine, click here.
SPONSORED LINKS
- Sigrity PowerDC Technology
- How Your PCB Design Team Can Become Your Dream Team for Power Integrity
- How a Team-Based Approach to PCB PI Analysis Yields Better Results
- Sigrity Tech Tips
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
Synopsys, Samsung Electronics Collaborate to Achieve First Production Tapeout of Flagship Mobile CPU
05/03/2024 | PRNewswireSynopsys, Inc. announced that Samsung Electronics has achieved successful production tapeout for its high-performance mobile SoC design, including flagship CPUs and GPUs, with 300MHz higher performance using Synopsys.ai™ full stack AI-driven EDA suite and a broad portfolio of Synopsys IP on Samsung Foundry's latest Gate-All-Around (GAA) process technologies.
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/03/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.
Real Time with… IPC APEX EXPO 2024: Software Solutions for Circuit Board Challenges
05/03/2024 | Real Time with...IPC APEX EXPONolan Johnson speaks with Will Webb from Aster Technologies about their software solutions for design teams, manufacturing, test engineers, and process engineers. Aster's software addresses the increasing complexities of circuit boards and the need for alternative testing methods.
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.