The Raw Power of Human Motion
April 9, 2018 | KAUSTEstimated reading time: 2 minutes
Autonomy is a much-anticipated feature of next-generation microsystems, such as remote sensors, wearable electronic gadgets, implantable biosensors and nanorobots. KAUST researchers led by Husam Alshareef, Jr-Hau He and Khaled Salama have developed small standalone devices by integrating maintenance-free power units that produce and use their own fuel instead of relying on an external power source.
Image caption: The lead-halide-based material features optoelectronic properties that are desirable in solar cells and light-emitting diodes.
Triboelectric nanogenerators (TENGs) capture mechanical energy from their surroundings, such as vibrations and random motion produced by humans, and convert it into electricity. In these tiny generators, frictional contact between materials of different polarity creates oppositely charged surfaces. Repeated friction causes electrons to hop between these surfaces, resulting in electric voltage.
The wearable power bracelet can capture and transform energy from human motion into electricity and store it in MXene supercapacitors to drive different sensors.
“We exploited this triboelectric effect to harvest energy from simple movements, such as hand clapping, finger tapping and routine hand motion, to drive different types of sensors,” says Alshareef.
The researchers have developed a self-powered photodetector by coupling the silicone-based polymer polydimethylsiloxane (PDMS) as a TENG with a material called organometallic halide perovskite¹. The lead-halide-based material features optoelectronic properties that are desirable in solar cells and light-emitting diodes.
To streamline their design and eliminate the need for a motion actuator, He’s team fabricated the photodetector using two multilayered polymer-based sheets separated by a small gap. One sheet comprised the perovskite ultrathin film while the other contained a PDMS layer. The gap allowed the team to harness the triboelectric effect when the device was activated by finger tapping.
“The self-powered device showed excellent responsiveness to incident light, especially when exposed to light of low intensity”, says Mark Leung, the lead author of the photodetector study. Because of its flexible and transparent polymer components, it also retained its performance after being bent 1,000 times and regardless of the orientation of the incident light.
Pushing the boundaries further, the researchers engineered a wearable self-powered bracelet that can store the converted mechanical energy by combining a carbon-fiber-embedded silicone nanogenerator with MXene microsupercapacitors.
They incorporated nanogenerator and miniaturized electrochemical capacitors into a single monolithic device encased in silicone rubber. The leak-proof and stretchable shell provided a flexible and soft bracelet that fully conformed to the body. Fluctuations in the skin–silicone separation altered the charge balance between electrodes, causing the electrons to flow back and forth across the TENG and the microsupercapacitor to charge up.
In addition to exhibiting longer cycle life and short charging time, MXene microsupercapacitors can accumulate more energy in a given area than thin-film and micro-batteries, offering faster and more effective small-scale energy storage units for TENG-generated electricity. When active, the bracelet can use the stored energy to operate various electronic devices, such as watches and thermometers.
“Our ultimate goal is to develop a self-powered sensor platform for personalized health monitoring,” says Ph.D. student Qiu Jiang, the lead author of the self-charging band project. The team is now planning to introduce sensors into the system to detect biomarkers in human sweat.
Suggested Items
Koh Young Extends Invitation to the 2024 IEEE Electronic Components and Technology Conference
04/30/2024 | Koh YoungKoh Young, the industry leader in True3D measurement-based inspection solutions, invites you to join us at the at the 2024 IEEE Electronic Components and Technology Conference from May 28-31, 2024, in Denver, Colorado at the Gaylord Rockies Resort & Convention Center.
Real Time with... IPC APEX EXPO 2024: Sustainability in the Industry
04/26/2024 | Real Time with...IPC APEX EXPOGuest Editor Henry Crandall and Chris Nash of Indium Corporation discuss the company's 90th anniversary and its focus on sustainability. They focus on the benefits of sustainable materials, their compatibility, and value propositions. The conversation also highlights how Durafuse LT technology's role in reducing reflow temperatures is leading to significant cost and energy savings. Nash also touches on downstream sustainability efforts such as using recycled materials for packaging.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/26/2024 | Andy Shaughnessy, Design007 MagazineIn this week’s roundup, we have a variety of articles covering everything from design through assembly, and even box build. I’ve always wondered whether box build was all it was cracked up to be. Do customers really pick one EMS provider over another because one company offers box build? And if you’ve ever wanted to volunteer, IPC’s Thought Leaders Program is looking for a few good technologists to help them on their mission. Check out Stanton Rak’s article, which was published in the spring issue of IPC Community.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
LPKF Extends Contract of CEO Klaus Fiedler until 2028
04/24/2024 | LPKFThe Supervisory Board of LPKF Laser & Electronics SE has decided to extend the contract of Dr. Klaus Fiedler as CEO until 31 December 2028. "Under the leadership of Klaus Fiedler, LPKF has undergone some extensive transformation since he joined just over 2 years ago.