Light-bending Nano-patterns for LEDs
June 8, 2018 | A*STAREstimated reading time: 2 minutes
Nanoscale patterns designed to bend, deflect and split light can now be fabricated directly on light-emitting diode (LED) surfaces using an innovative etching method developed by A*STAR researchers1. The new fabrication scheme creates new possibilities for the facile control of light output.
Recent advancements in LED lighting have transformed daily life and cutting-edge technology — from efficient room lighting, to TV and mobile device backlights, and the tiny optical circuits that drive global fiber-optic networks.
The light-emitting component of LEDs is a surprisingly simple structure, typically a thin layer of a dielectric material such as gallium nitride (GaN) on a crystalline sapphire substrate. This structure means the light emitted by LEDs is inefficiently dispersed in all directions, including back into the substrate on which the light-emitting layer is fixed. So, while researchers have made tremendous advances in light-emitting efficiency, there remains room for improvement.
Egor Khaidarov and colleagues from A*STAR’s Data Storage Institute and Nanyang Technological University have now found a way to pattern GaN with nanoscale features that can control the behavior of light.
“We have demonstrated that metasurfaces — surfaces patterned with features typically smaller than the wavelength of emitted light — can be fabricated directly on a standard GaN-on-sapphire platform,” says Khaidarov. “Most importantly, we have shown that with good design, it is possible to create the metasurfaces without the need for an additional layer, while still maintaining a high level of emission efficiency.”
Metasurface modifications of LEDs have been attempted in the past. These included patterning an additional layer with a very different refractive index than the underlying GaN-on-sapphire substrate to keep the light in the metasurface layer and enhance the light-matter interactions. The problem with patterning GaN directly — a major benefit for fabrication — is a weakness of interactions because of the lack of refractive index contrast.
“To overcome this, we worked with very deep structures with a large aspect ratio, effectively arrays of nanopillars, to reduce the influence of the substrate on the metasurface’s optical modes,” explains Khaidarov (see image).
The resulting design, however, posed a major challenge for fabrication, requiring the team to develop a precise nanofabrication procedure involving electron beam lithography and fast, high-temperature reactive ion etching.
“With our design concept we have, in principle, full control of the output properties of light, which allows us to fabricate more complex optical components such as lenses, vortex beam generators, polarimeters and holograms,” says Khaidarov.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
Synopsys, Samsung Electronics Collaborate to Achieve First Production Tapeout of Flagship Mobile CPU
05/03/2024 | PRNewswireSynopsys, Inc. announced that Samsung Electronics has achieved successful production tapeout for its high-performance mobile SoC design, including flagship CPUs and GPUs, with 300MHz higher performance using Synopsys.ai™ full stack AI-driven EDA suite and a broad portfolio of Synopsys IP on Samsung Foundry's latest Gate-All-Around (GAA) process technologies.
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/03/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.
Real Time with… IPC APEX EXPO 2024: Software Solutions for Circuit Board Challenges
05/03/2024 | Real Time with...IPC APEX EXPONolan Johnson speaks with Will Webb from Aster Technologies about their software solutions for design teams, manufacturing, test engineers, and process engineers. Aster's software addresses the increasing complexities of circuit boards and the need for alternative testing methods.
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.