Trouble in Your Tank: Understanding Interconnect Defects, Part 1
It’s Only Common Sense: Marketing Isn’t Fluff, It’s Ammunition
Driving Innovation: Mechanical and Optical Processes During Rigid-flex Production
InduBond Gets Hot With Induction Heating Lamination
March 25, 2020 | Real Time with...IPCEstimated reading time: Less than a minute
During IPC APEX EXPO 2020 in San Diego, California, the I-Connect007 Editorial Team met with some of the industry's top executives, managers, and engineers.
In this video interview from the show, Editor Nolan Johnson sat down to speak with Víctor Lázaro, InduBond’s R&D director and technical manager, about InduBond's latest technology for panel lamination utilizing induction heating. InduBond demonstrates a lamination oven on the IPC APEX EXPO show floor, as well as the advantages of the technology.
IPC APEX EXPO is the largest PCB industry event in North America. The next IPC APEX EXPO will be held January 26-28, 2021, at the San Diego Convention Center.
To watch this interview, click here.
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Target Condition: Distribution of Power—Denounce the Ounce
11/05/2025 | Kelly Dack -- Column: Target ConditionHave you ever wondered why the PCB design segment uses ounces to describe copper thickness? There’s a story behind all of this—a story that’s old, dusty, and more than a little absurd. (Note that I didn’t add “Like many of us.”) Legend has it that back in the days of copper tinkers and roofing tradesmen, the standard was set when a craftsman hammered out a sheet of copper until it weighed one ounce, when its area conveniently matched the square of the king’s foot.
Life Is a Highway: A Family of 8 Turned the Entire U.S. Into a Learning and Working Environment
11/04/2025 | Steven Bowles, Lockheed MartinIt’s 6:45 a.m. in a modern A-frame cabin tucked into the misty edges of the Cascade Range in Arlington, Washington. I’ve just made a quick Nespresso, checked my calendar of virtual meetings, and verified the Airbnb’s Wi-Fi speed is holding steady. In the next room, my wife Lynsey corrals our six kids into breakfast while planning a day trip to Seattle’s Children’s Museum. By 7:30, I’m camera-ready in a makeshift office nook, leading a discussion on HDI PCB design for an IPC standards committee. After a busy day, our Bowles crew, ranging in age from 1 to 10 years old, is hands-on with activities and exhibits in the museum.
TTM Technologies Receives Two Awards from the Global Electronics Association at the 2025 IPC CEMAC Conference
11/03/2025 | Globe NewswireTTM Technologies, Inc. announced that two of its team members received prestigious Asia Steering Committee Outstanding Service Awards from the Global Electronics Association (formerly named IPC connecting global electronics industry) at the 2025 IPC CEMAC Electronics Manufacturing Annual Conference in Shanghai.
TTCI Brings Hands-On Test Engineering and IPC Training Expertise to PCB Carolina 2025
10/31/2025 | The Test Connection Inc.The Test Connection Inc. (TTCI), a trusted provider of electronic test and manufacturing solutions, and The Training Connection LLC (TTC-LLC) will exhibit at PCB Carolina on Wednesday, November 12, 2025, at the McKimmon Center at NC State University in Raleigh, North Carolina. Attendees can visit Table 4 to say hello to Bert Horner and Bill Graver, and learn more about their test engineering services and technical training programs.
The Training Connection Continues to Grow with Addition of Veteran IPC Trainer Bill Graver
10/30/2025 | The Training Connection LLCThe Training Connection, LLC (TTC-LLC), a premier provider of test engineering and development training, is proud to announce the addition of Bill Graver to its growing team of industry experts. A respected professional with more than 35 years in electronics manufacturing, Bill joins as an IPC Master Trainer, bringing a wealth of hands-on experience in PCB testing, failure analysis, and process improvement.