Trouble in Your Tank: Can You Drill the Perfect Hole?
It’s Only Common Sense: Your Guide to Better Time Management
Dan's Biz Bookshelf: 'Move Your Bus'
Just Ask Happy: The Future of 3D Printing
June 30, 2020 | I-Connect007 Editorial TeamEstimated reading time: Less than a minute
We asked for you to send in your questions for Happy Holden, and you took us up on it! The questions you've posed run the gamut, covering technology, the worldwide fab market, and everything in between. Enjoy.
Q: What is your opinion on the 3D printers that can utilize both conductive and non-conductive inks? Is this the future of PCBs?
A: These 3D printers are evolving rapidly. A must is that the printer has the ability to use a number of different inks for the different components of a PCB, including the curing of the inks. At a minimum, that is:
- Insulating substrate
- Low-ohmic conductive ink
- Non-conductive insulating crossover
As the equipment improves, solder masks, resistive/capacitive and solder paste inks, and even semiconductor inks would be nice. Currently, this is a quick-turn application for a few breadboards.
Whether this technology moves into being a source of operational electronics with sufficient reliability will depend on the innovations in creating future inks. Conventional PCB production continues to innovate to reduce their turnaround times and costs, forcing 3D printing to work that much harder on their solutions.
To pose your own question for Happy Holden, take the survey by clicking here.
Share on:
Suggested Items
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.
Hands-On Demos Now Available for Apollo Seiko’s EF and AF Selective Soldering Lines
06/30/2025 | Apollo SeikoApollo Seiko, a leading innovator in soldering technology, is excited to spotlight its expanded lineup of EF and AF Series Selective Soldering Systems, now available for live demonstrations in its newly dedicated demo room.
Indium Corporation Expert to Present on Automotive and Industrial Solder Bonding Solutions at Global Electronics Association Workshop
06/26/2025 | IndiumIndium Corporation Principal Engineer, Advanced Materials, Andy Mackie, Ph.D., MSc, will deliver a technical presentation on innovative solder bonding solutions for automotive and industrial applications at the Global Electronics A
Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
06/26/2025 | Team NCAB -- Column: Fresh PCB ConceptsMicro components have redefined what is possible in PCB design. With package sizes like 01005 and 0201 becoming more common in high-density layouts, designers are now expected to pack more performance into smaller spaces than ever before. While these advancements support miniaturization and functionality, they introduce new assembly challenges, particularly with traditional solder mask and legend application processes.
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
06/25/2025 | Nash Bell -- Column: Knocking Down the Bone PileTin whiskers are slender, hair-like metallic growths that can develop on the surface of tin-plated electronic components. Typically measuring a few micrometers in diameter and growing several millimeters in length, they form through an electrochemical process influenced by environmental factors such as temperature variations, mechanical or compressive stress, and the aging of solder alloys.