-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
IPC Releases September Outlook Report
September 22, 2020 | IPCEstimated reading time: 3 minutes
The economy improved over the last month, but it is clear that momentum is slowing and future growth will likely be more difficult to come by.
In the United States, the rate of new COVID-19 cases has slowed somewhat, which has likely helped to reduce some uncertainty. Manufacturing sentiment moved higher again, and the outlook for new orders and production remains solid. Consumers also appear somewhat less concerned about the year ahead, though expectations remain half as favorable as they did at the start of the year. Consumer sentiment in the United States has ebbed around April’s lull but remains above the lows experienced during the last recession. However, other uncertainties remain, and business and consumer sentiment could slip in the coming months. In the United States, the outcome of November’s election will increasingly weigh on sentiment, and uncertainties around another stimulus bill will influence businesses’ investment decisions and Americans’ spending habits. Retail sales in August slowed as the end of CARES Act cash payments and pandemic unemployment payments created a headwind for consumer spending. At the same time, many areas of retail sales are above pre-pandemic levels calling into question how far retail sales can go when, employment remains depressed and purchasing power has been curtailed.
In Europe, countries began to relax their stay-at-home orders in earnest. Businesses began to reopen as consumers worked toward a new normal. But rising cases of COVID-19 could dampen the recovery. France, for example, recently reported its highest daily increase of infections since the pandemic began in mid-February.
The Organization for Economic Co-operation and Development (OECD) recently “raised” its outlook for the global economy for 2020. The OECD now says the world economy shrank by 4.5 percent, up from its June forecast of a 6 percent decline. While the economy is doing better than anticipated, it isn’t great. Only China will see positive growth in 2020 among the G20 countries.
Economies are extremely fragile right now, and any policy blunders will stymie the recovery. In the United States, there has been talk of additional fiscal stimulus but little movement forward. On the monetary front, the Federal Reserve remains committed to accommodative policy for several years, and interest rates are expected to stay near zero at least through 2023. The European Central Bank (ECB) recently announced it was leaving its policy programs unchanged, but many expect the entity will expand its bond purchase stimulus.
There is also growing concern that the expiration of some policy measures might push the economy back into contraction. In the United States, the expiration of eviction moratoriums will create a headwind. In Europe, the expiration of short-time work benefits could drive layoffs and increase the unemployment rate. Other policy measures will be dictated by economic realities yet to materialize. For example, weakness in the dollar will create a challenge for Europe in the coming year. The Euro continues to strengthen against the dollar, which will support U.S. exports but will likely hurt European exports at a time when manufacturers are working to move operating rates higher.
In both the United States and Europe, manufacturing has recovered a significant portion of ground lost to the pandemic, but most sectors remain below prepandemic levels. While manufacturing is expanding, manufacturers remain cautious. New orders and production are expanding on both continents, and backlogs are growing. This, in turn, is keeping prices firm, but manufacturers are not expanding employment, and inventories remain lean. Capital investment is likely to remain in check. Demand is anything but certain, and manufacturers are responding to an uncertain environment by trying to keep costs contained.
The initial recovery brought strong growth rates almost across the board as the economies reopened; however, as growth slows, we are likely to see a divergence in across sectors. The electronics industry continues to appear to have weathered the pandemic most favorably. Production is up in recent months and positive on a year-over-year basis in both the United States and Europe.
While downstream markets for electronics have been recovering, many are showing signs of slowing growth. The automotive industry was especially hard hit by the pandemic but recovered swiftly. Some of the pandemic-induced, pent-up demand has cleared, and now the auto industry is showing signs of a slowdown. In the last month, auto production declined from July. Sectors of the economy will likely feel a divergence in recovery as growth slows and some areas of the economy recover more fully than others.
Read the full report at ipc.org.
Suggested Items
Advancing Aerospace Excellence: Emerald’s Medford Team Earns Space Addendum Certification
06/30/2025 | Emerald TechnologiesWe’re thrilled to announce a major achievement from our Medford, Oregon facility. Andy Abrigo has officially earned her credentials as a Certified IPC Trainer (CIT) under the IPC J-STD-001 Space Addendum, the leading industry standard for space and military-grade electronics manufacturing.
Magnalytix and Foresite to Host Technical Webinar on SIR Testing and Functional Reliability
06/26/2025 | MAGNALYTIXMagnalytix, in collaboration with Foresite Inc., is pleased to announce an upcoming one-hour Webinar Workshop titled “Comparing SIR IPC B-52 to Umpire 41 Functional & SIR Test Method.” This session will be held on July 24, 2025, and is open to professionals in electronics manufacturing, reliability engineering, and process development seeking insights into new testing standards for climatic reliability.
IPC Rebrands as Global Electronics Association: Interview With Dr. John W. Mitchell
06/22/2025 | Marcy LaRont, I-Connect007Today, following a major announcement, IPC is embracing the rapid advancement of technology with a bold decision to change its name to the Global Electronics Association. This name more accurately reflects the full breadth of its work and the modern realities of electronics manufacturing. In this exclusive interview, Global Electronics Association President and CEO Dr. John W. Mitchell shares the story behind the rebrand: Why now, what it means for the industry, and how it aligns with the organization’s mission.
Global Electronics Association Debuts; New Name Elevates IPC’s 70-Year Legacy as Voice of $6 Trillion Electronics Industry
06/25/2025 | Global Electronics AssociationToday begins a new chapter for IPC as it officially becomes the Global Electronics Association, reflecting its role as the voice of the electronics industry. Guided by the vision of “Better electronics for a better world,” the Global Electronics Association (electronics.org) is dedicated to enhancing supply chain resilience and promoting accelerated growth through engagement with more than 3,000 member companies, thousands of partners, and dozens of governments across the globe.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/20/2025 | Andy Shaughnessy, I-Connect007It’s been a busy week in this industry, and we have news and articles from the PCB design, fabrication and assembly communities. Some of this news is out of this world. We may be losing the high ground—the really high ground. Columnist Jesse Vaughan explains how the U.S. seems to be falling behind in space, and how this could affect our ability to defend ourselves in the future. We have an update on the U.S.-China tariff talks, which seem to be moving forward, though sometimes at a snail’s pace.