Dan's Biz Bookshelf: 'Move Your Bus'
Driving Innovation: Direct Imaging vs. Conventional Exposure
It’s Only Common Sense: Selling to Today's Generation of Buyers
Book Excerpt: ‘Thermal Management: A Fabricator's Perspective,' Chapter 3
January 26, 2021 | Anaya Vardya, American Standard CircuitsEstimated reading time: 1 minute
Chapter 3: Metal-Core Boards
Conceptually, a metal-core board is exactly like it sounds—the metal is in the middle of the PCB sandwiched between layers on both sides. Just about any PCBA that will contain active heat-generating components can benefit when designed on a metal-core PCB. On a conventional PCB, the standard FR-4 layers are relatively poor thermal conductors, and heat is normally dissipated from active components using vias and thermal pads, as discussed earlier. A metal core has much greater thermal conductivity, allowing it to easily dissipate heat away from active components. This prevents hot spots that can form in PCBs by dissipating heat evenly across the PCB and increasing performance and lifetime.
One example would be in the LED lighting industry, where LEDs produce a significant amount of energy and heat. A metal-core PCB has two benefits in this application: it provides some natural reflectivity for any light that travels toward the substrate, increasing the device brightness; and the other is extending the life of the product by quickly transferring heat away from the LEDs.
To download The Printed Circuit Designer’s Guide to…Thermal Management: A Fabricator’s Perspective, click here. You can also view other titles in our full library. Check out other books from American Standard Circuits, including The Printed Circuit Designer’s Guide to… Fundamentals of RF/Microwave PCBs and Flex and Rigid-Flex Fundamentals.
Share on:
Suggested Items
I-Connect007’s Editor’s Choice: Five Must-Reads for the Week
07/04/2025 | Marcy LaRont, I-Connect007For our industry, we have seen several bullish market announcements over the past few weeks, including one this week by IDC on the massive growth in the global server market. We’re also closely watching global trade and nearshoring. One good example of successful nearshoring is Rehm Thermal Systems, which celebrates its 10th anniversary in Mexico and the official opening of its new building in Guadalajara.
Count On Tools Recognizes Donna Orr’s Ongoing Leadership and Impact Across 27+ Years
06/26/2025 | Count On ToolsCount On Tools, Inc. (COT), a leading provider of precision components and SMT spare parts, is proud to recognize Donna Orr, Executive Manager, for her continued dedication and leadership as she marks more than 27 years with the company.
A Record Year for the 75th Annual IEEE Electronic Components and Technology Conference (ECTC)
06/26/2025 | ECTCThe 75th annual 2025 IEEE Electronic Components and Technology Conference (ECTC), held at the Gaylord Texan Resort & Convention Center here May 27-30, had record attendance, a record number of paper submissions/presentations, record international and student participation, and a record number of exhibitors in a sold-out exhibition hall:
The Death of the Microsection
06/26/2025 | Bob Neves, Reliability Assessment Solutions, Inc.I got my start out of college grinding and polishing PCB microsections. My thumbs are a bit arthritic today because of the experience (microsection grinders know what I mean). Back then, via structures were rather large, and getting to the center in six steps of grinding and polishing was easy compared to what my team has been doing recently at the lab.
Specially Developed for Laser Plastic Welding from LPKF
06/25/2025 | LPKFLPKF introduces TherMoPro, a thermographic analysis system specifically developed for laser plastic welding that transforms thermal data into concrete actionable insights. Through automated capture, evaluation, and interpretation of surface temperature patterns immediately after welding, the system provides unprecedented process transparency that correlates with product joining quality and long-term product stability.