Knocking Down the Bone Pile: Gold Mitigation for Class 2 Electronics
Punching Out: Your Financial Preparation for a Sale
Nolan's Notes: The Next Killer App in Component Manufacturing
IPC Releases IPC-7093A, Design and Assembly Process Implementation for BTCs
February 15, 2021 | IPCEstimated reading time: Less than a minute
The long-awaited release of IPC-7093A, Design and Assembly Process Implementation for Bottom Termination Components (BTCs) is here. Revision A is a complete overhaul of IPC-7093 which provides design and assembly guidance for implementing BTCs and focuses on critical design, materials, assembly, inspection, repair, quality, and reliability issues.
IPC-7093A includes a step-by-step process on how to design and incorporate BTCs into any card layout. Comprehensive descriptions on how to successfully implement robust designs and assembly processes and troubleshooting guidance for common anomalies which can occur during BTC assembly are included.
Revision A adds state-of-the-art guidance on critical elements for thermal pad design, thermal via usage, stencil design, assembly recommendations, reliability considerations, known issues/ defects to avoid. The standard’s multiple design point options enable reliable BTC designs.
The standard is ideal for anyone involved with physical design, process and reliability engineers or managers who are responsible for design, assembly, inspection, and repair processes.
“BTCs are in integral part of electronic designs today,” stated Matt Kelly, IPC chief technologist. “With increased product functionality, device miniaturization, and increased power consumption the need for optimized thermal management has never been higher.”
Share on:
Suggested Items
The Shaughnessy Report: Solving the Data Package Puzzle
05/12/2025 | Andy Shaughnessy -- Column: The Shaughnessy ReportIf you ask fabricators about their biggest challenges, they’ll often point at PCB designers—the readers of this magazine. Yes, you! Why is it so difficult to create the ideal data package? It’s a fairly straightforward task. But this part of the design process keeps tripping up designers, even those who started in the industry before Pink Floyd split up.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/09/2025 | Andy Shaughnessy, Design007 MagazineTrade show season is wrapping up as we head into summer. Where has the time gone? I hope you all get the chance to take a vacation this year, because I know you’ve earned one. Speaking of which, when was my last vacay? If I can’t remember, it’s probably time for one. It’s been a busy week in electronics, with fallout from the back-and-forth on tariffs taking up most of the oxygen in the room. We have quite an assortment of articles and columns for you in this installment of Must-Reads. See you next time.
Imec Coordinates EU Chips Design Platform
05/09/2025 | ImecA consortium of 12 European partners, coordinated by imec, has been selected in the framework of the European Chips Act to develop the EU Chips Design Platform.
New Issue of Design007 Magazine: Are Your Data Packages Less Than Ideal?
05/09/2025 | I-Connect007 Editorial TeamWhy is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal data package for your design.
RF PCB Design Tips and Tricks
05/08/2025 | Cherie Litson, EPTAC MIT CID/CID+There are many great books, videos, and information online about designing PCBs for RF circuits. A few of my favorite RF sources are Hans Rosenberg, Stephen Chavez, and Rick Hartley, but there are many more. These PCB design engineers have a very good perspective on what it takes to take an RF design from schematic concept to PCB layout.