Raytheon Technologies Working to Take the Heat Off a New Generation of Fighters
June 25, 2021 | Raytheon CompanyEstimated reading time: 4 minutes
The U.S. military has begun to define requirements for its future fighters. To conduct operations in advanced threat environments, next-gen fighters will need greater range provided by more powerful and fuel-efficient engines; better avionics; and advanced mission systems.
Making all that happen will require engineers to solve a number of challenges – including how to handle all the heat those high-tech new systems will produce. And the power and thermal management experts at Raytheon Technologies are working on it. With a long history of collaboration on military engines, the company’s Collins Aerospace and Pratt & Whitney businesses are working together with the Raytheon Technologies Research Center to break new ground on power and thermal management solutions that will enable the aircraft of tomorrow, while also supporting upgrades to today’s fleet.
“It’s the difference between success or failure. If you’re not succeeding in getting the heat out of the system, you have a problem,” said Andreas Roelofs, Raytheon Technologies’ vice president of research and development and the director of the Raytheon Technologies Research Center, where experts are contributing to the effort through new designs for heat exchangers, testing and evaluation, composite materials and novel methods of manufacturing. “Without effective heat transfer, you can’t drive top performance.”
The solutions the company is developing will have applications for a range of platforms, including the U.S. Air Force and U.S. Navy’s future fighter programs, the U.S. Army’s Future Vertical Lift program, battlefield air mobility, and the F-35 and F-22 modernization programs.
“We want to find the most efficient way to integrate between propulsion, electric power generation and thermal management,” said Bill Dolan, vice president of engineering and technology at Collins Aerospace’s Power & Controls unit. “Current systems cannot support the increased heat loads that future enhancements will require without detracting from desired aircraft performance, so we are actively exploring new architectures, new packaging and new methods of integration.”
The Raytheon Technologies team is uniquely positioned to achieve these improvements, with a Tier 1 systems supplier (Collins Aerospace) and an engine manufacturer (Pratt & Whitney) under one roof. Working together, the team can realize gains that would ordinarily be left in the margins, while providing seamless integration and streamlined service to its customers. Rather than working in silos, the Raytheon Technologies structure, digital capabilities and collective expertise allow it to partner with airframers and military customers in a unique way to produce the best solutions for the warfighter.
“Collins Aerospace and Pratt & Whitney have worked together for decades on military engines, including the F135 propulsion system for the F-35, but this is a new level of collaboration,” said Dolan. “In the past, the environmental control systems and engines for military aircraft have been designed and procured separately, but future aircraft require a far more integrated approach in order to support all the desired upgrades. We’re working to co-optimize the thermal and engine cycles together. That’s something that’s never been done before.”
One example: Collins Aerospace currently supplies Pratt & Whitney with thermal management heat exchangers for the F135, the engine that powers the Lockheed Martin F-35 Lighting II. Collins Aerospace is exploring the potential to produce new heat exchanger designs for future platforms via additive manufacturing. That would reduce weight, drag and volume, and it could open up new design possibilities within the aircraft’s space constraints.
For nearly a century, Pratt & Whitney has been advancing military propulsion for tactical, strategic and mobility aircraft. It has powered aircraft used in every major U.S. conflict since its founding – including iconic aircraft such as the SR-71 Blackbird – with engines that have featured significant achievements in military propulsion technology. Now, Pratt & Whitney is drawing on its legacy of innovation to continue to push the boundaries of military propulsion, including in the realm of power and thermal management solutions.
“As we look to the future, power and thermal management system capacity will be a key enabler for next-generation fighter aircraft as well as for capability growth of existing aircraft,” said Dave Stagney, senior director for Pratt & Whitney’s GATORWORKS organization. “Pulling additional power from our engines under existing approaches has a significant negative impact on engine life and maintenance costs. Our integrated approach – leveraging advanced systems architectures but also state-of-the-art digital engine controls – not only results in lower fuel burn and lifecycle costs, but also less weight, better packaging and higher overall aircraft performance.”
While the promise of Raytheon Technologies’ power and thermal management solutions is clear for future military aircraft, the team believes they will also have applications for commercial aircraft and ground vehicles as well.
“While we see initial application for fighters, there are certainly a range of platforms that could benefit from our integrated approach,” said Stagney. “We’ve only just started to scratch the surface of what our collective power and thermal management technologies are capable of.”
Suggested Items
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.