-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
FTG Circuits Segment Net Sales Down 35% in Q2 2021
July 15, 2021 | Firan Technology Group CorporationEstimated reading time: 4 minutes
Firan Technology Group Corporation announced financial results for the second quarter 2021.
- FTG achieved a second sequential quarter of increased bookings as the aerospace industry recovers from the COVID-19 pandemic.
- Second quarter bookings are up 8% over Q1 2021 and up 20% over Q4 2020.
- Gross margins rebounded 7.2 percentage points over Q1 2021 to 26.8% with increased revenues and stronger operating performance, demonstrating the operating leverage that results from increased sales.
- FTG increased net cash on the balance sheet to $14.8M, an increase of $1.4M in Q2 2021 again showing the cash generating nature of the business. Over the past 18 months, during the pandemic, FTG has generated $13M in Free Cash Flow, after investments in R&D and capital equipment.
- FTG was approved for an additional $1.2M in Canada Emergency Wage Subsidy (CEWS) in the quarter which we used to help maintain our workforce in the face of revenue reductions due to COVID-19.
Business Highlights
- FTG accomplished many goals in Q2 2021 that continue to improve the Corporation and position it for the future, including:
- Achieved a 0.97:1 book-to-bill ratio for Q2 2021. Increased bookings by 8% compared to Q1 2021, and by 20% compared to Q4 2020 as the Commercial aerospace industry begins to recover.
- Was approved for an additional $1.2M in Canada Emergency Wage Subsidy (CEWS) which we used to help maintain our workforce in the face of revenue reductions due to COVID-19.
- Subsequent to the end of Q2, FTG received forgiveness of USD 1.3M, being the residual of US Paycheck Protection Program funds received by our U.S. operations as a result of FTG maintaining our workforce for the required period of time. This amount will be included in income for Q3 2021.
- FTG Aerospace Chatsworth, which has maintained an engineering office in Dallas-Fort Worth since the acquisition of Photo-Etch in 2016, will close this office by the end of 2021 and move the function to the Chatsworth site in California reducing the site’s facility costs in 2022 and beyond.
- Received significant new bid and qualification opportunities for both businesses that are expected to benefit FTG revenues and market share in the coming quarters:
- Repatriation efforts to re-shore some circuit board sourcing to North America.
- New Aerospace opportunities for circuit board sourcing from low-cost countries (China).
- Opportunities to participate in the new US trainer aircraft cockpit.
- Increased awards for circuit boards on a contract renewal from a US Tier 1 avionics manufacturer.
- New qualification opportunities for circuit boards for a major US-headquartered EMS provider.
- New opportunities for space applications for circuit boards and shipped first flight cockpit panels for manned space vehicle within the quarter.
- Large new circuit board and assembly opportunity from a large US Defense contractor.
- A number of new US military aftermarket assembly opportunities for multi-year procurements.
- The Averatek semi-additive circuit board manufacturing equipment in our Circuits Fredericksburg facility completed installation and was operational in Q2. Activities have been initiated with over 10 customers to develop this process to address future industry demands.
Overall for FTG, sales decreased by $6.5M or 24% from $26.8M in Q2 2020 to $20.3M in Q2 2021. The COVID-19 pandemic has negatively impacted commercial aerospace activity as well as the weaker US dollar has negatively impacted sales reported in Canadian currency. The average exchange rate for Q2 2021 was $1.24 as compared to $1.40 for Q2 2020, which is a decline of 11%. This represents approximately a $2.5M negative impact on sales in the quarter compared to Q2 last year. On a year-to-date basis, sales were $39.3M as compared to $51.4M in 2020. The decrease is due to the COVID-19 pandemic impact on commercial aerospace activity as well as the currency impact. The average exchange rate for the year-to-date period in 2021 was $1.26 as compared to $1.36 in the comparable prior year period.
On a sequential basis, sales increased from $19.0M in Q1 2021 to $20.3M in Q2 2021, with the gradual recovery of commercial aerospace shipments taking hold, as well as fewer COVID-19 issues within our operating sites.
The Circuits Segment net sales in Q2 2021 were down $6.6M, or 35% in Q2 2021 versus Q2 2020. All sites were down but the largest decline was seen in the Circuits Toronto plant which is more heavily exposed to the Commercial Aerospace market. On a year-to-date basis, net sales were $25.0 as compared to $36.1M for the prior year period.
For the Aerospace Segment, net sales in Q2 2021 were $7.3M compared to $7.2M in Q2 last year, an increase of $0.1M or 2%. Increased shipments to military customers from our Chatsworth, CA site exceeded the combined impact of the downturn in the commercial aerospace market, reduced Simulator related sales and the currency impact. The Aerospace Tianjin site was down as it is exclusively focused on commercial aerospace. On a year-to-date basis, net sales were $14.3M as compared to $15.3M for the prior year period.
Gross margins in Q2 2021 were $5.5M or 26.8% compared to $8.7M or 32.3% in Q2 2020. The lower sales impacted the overall margin. The CEWS added $1.2M to gross margin or 5.8 percentage points (Q2 2020 - $0.8M or 3.0 percentage points). On a year-to-date basis, gross margin was $9.1M or 23.2% as compared to $12.6M or 24.6% for the comparable prior year period. The decline in gross margin is due to the lower level of sales, partially offset by CEWS of $2.2M in 2021 as compared to $0.8M in 2020.
Trailing Twelve Month (TTM) Earnings before interest, tax, depreciation and amortization (EBITDA) for FTG was $11.5M. Lower sales, unfavourable foreign exchange impact and some operational challenges in Circuits Chatsworth, were partially offset by wage subsidies in Canada and the PPP forgiveness in the US.
Suggested Items
Digital Twin Concept in Copper Electroplating Process Performance
07/11/2025 | Aga Franczak, Robrecht Belis, Elsyca N.V.PCB manufacturing involves transforming a design into a physical board while meeting specific requirements. Understanding these design specifications is crucial, as they directly impact the PCB's fabrication process, performance, and yield rate. One key design specification is copper thieving—the addition of “dummy” pads across the surface that are plated along with the features designed on the outer layers. The purpose of the process is to provide a uniform distribution of copper across the outer layers to make the plating current density and plating in the holes more uniform.
Trump Copper Tariffs Spark Concern
07/10/2025 | I-Connect007 Editorial TeamPresident Donald Trump stated on July 8 that he plans to impose a 50% tariff on copper imports, sparking concern in a global industry whose output is critical to electric vehicles, military hardware, semiconductors, and a wide range of consumer goods. According to Yahoo Finance, copper futures climbed over 2% following tariff confirmation.
Flexible Printed Circuit Board Market to Reach US$40.447 Billion by 2030
07/10/2025 | Globe NewswireThe flexible printed circuit board market will grow at a CAGR of 8.28% to be valued at US$40.447 billion in 2030 from US$27.17 billion in 2025.
TTM Technologies Prepares For the Future with the Acquisition of a Facility in Wisconsin and Land in Penang
07/10/2025 | Globe NewswireTTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, quick-turn and technologically advanced printed circuit boards (PCB), announced the acquisition of a 750,000-square-foot facility in Eau Claire, Wisconsin, as well as land rights for an additional future manufacturing site in Penang, Malaysia.
Schweizer Electronic: Annual General Meeting Approves All Proposed Resolutions with a Large Majority
07/10/2025 | Schweizer Electronic AGThe Annual General Meeting of Schweizer Electronic AG took place on June 27, 2025, at the company's headquarters in Schramberg.