Dan's Biz Bookshelf: 'Move Your Bus'
Driving Innovation: Direct Imaging vs. Conventional Exposure
It’s Only Common Sense: Selling to Today's Generation of Buyers
Gardien Group Now offers Insulation (IR) Testing and Micro-Short Detection
January 14, 2022 | Gardien GroupEstimated reading time: 1 minute
As part of Gardien’s growing list of options for quality control in the printed circuit boards industry, we now offer Insulation Testing and Micro-Short detection on our Flying Probe lines running the Gardien FPX software.
IR Test, unlike Hi-Pot Testing, supplies a selected voltage and monitors the isolation of the nets or planes tested to a pre-determined resistive threshold. With standard Hi-Pot, the high voltage is applied to the planes or nets and looks for a current leak or breakdown. IR testing has grown in popularity in recent years, especially with high speed and Aerospace designs.
Micro-Shorts have plagued manufacturers for years and Gardien now offers an option which detects these very small shorts. Although standard Isolation testing will find these shorts, there is a possibility the current being passed during the Isolation Test could burn the microfilament and upon retest, pass the board. The problem is that residue may remain at the filament site and over time metalogical activity may cause the short to reappear down the road resulting in a field failure.
Micro-Short Detection using the same principles for isolation testing but used very low current during the test so that any of these micro-shorts may be detected before the main Continuity and Isolation tests are performed. Gardien’s FPX solution offers selectable currents and the micro-short test is performed as a part of the test cycle with the regular test. Although this option does add time to the overall test, It makes perfect sense to use this option on product that may have a history tight space microfilament shorting. “It can save you from a costly return from the field” stated Rick Meraw, one of Gardien’s R & D members.
Gardien has constantly upgraded and added new technologies and most advanced features to its new and existing machines during its long journey in the field. Consistent R&D and the ability to adapt to drastic changes have made Gardien one of the most dynamic names in the PCB industry.
Contact your nearest Service Centre for further details or visit www.gardien.com.
Share on:
Suggested Items
S&K Aerospace Awarded Major Contract Under DLA Maritime Acquisition Advancement Program
07/02/2025 | BUSINESS WIRES&K Aerospace, LLC has been awarded a significant contract under the Defense Logistics Agency’s (DLA) Maritime Acquisition Advancement Program, managed by the U.S. Naval Supply Command - Weapon Systems Support (NAVSUP WSS) in Mechanicsburg, PA.
Green Circuits to Exhibit Full-Service Electronics Manufacturing Solutions at 2025 SMD Symposium
07/02/2025 | Green CircuitsGreen Circuits, a full-service Electronics Manufacturing Services (EMS) partner to leading OEMs, is pleased to announce its participation in the 2025 SMD Symposium, taking place August 5-7 at the Von Braun Center in Huntsville, Alabama.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/27/2025 | Nolan Johnson, I-Connect007While news outside our industry keeps our attention occupied, the big news inside the industry is the rechristening of IPC as the Global Electronics Association. My must-reads begins with Marcy LaRont’s exclusive and informative interview with Dr. John Mitchell, president and CEO of the Global Electronics Association. For designers, have we finally reached the point in time where autorouters will fulfill their potential?
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
06/25/2025 | Nash Bell -- Column: Knocking Down the Bone PileTin whiskers are slender, hair-like metallic growths that can develop on the surface of tin-plated electronic components. Typically measuring a few micrometers in diameter and growing several millimeters in length, they form through an electrochemical process influenced by environmental factors such as temperature variations, mechanical or compressive stress, and the aging of solder alloys.
RTX, the Singapore Economic Development Board Sign MOU Outlining 10-year Growth Roadmap
06/20/2025 | RTXRTX and the Singapore Economic Development Board (EDB) have signed a Memorandum of Understanding (MoU) which outlines a 10-year roadmap to further long-term strategic collaboration in Singapore.