Engineers Reveal Cause of Key Sodium-ion Battery Flaw
February 16, 2022 | Syl Kacapyr, Cornell UniversityEstimated reading time: 2 minutes
Cornell researchers have uncovered the source of a persistent problem limiting the durability of sodium-ion batteries, providing manufacturers with new strategies for powering the 21st century.
Sodium-ion batteries are a promising technology for electric vehicles, the energy grid and other applications because they are made from abundant materials that are energy dense, nonflammable and operate well in colder temperatures. But engineers have yet to perfect the chemistry. While the lithium-ion batteries found in modern electronics can recharge thousands of times, most variations of sodium-ion batteries can only cycle a small fraction of that.
Artistic representation of the atomic shuffling during the phase transition from P2 (left) and O2 (right) phases, revealed by the operando single particle X-ray diffraction in sodium-ion batteries.
The poor durability stems from a specific atomic reshuffling in the battery’s operation – the P2-O2 phase transition – as ions traveling through the battery disorder crystal structures and eventually break them. While the phase transition has been of interest to researchers, the mechanisms behind it have been difficult to study, especially during battery operation.
Key aspects of that mechanism have been revealed by a Cornell team from the lab of Andrej Singer, assistant professor of materials science and engineering, and were published Feb. 1 in the journal Advanced Energy Materials. Doctoral student Jason Huang is the lead author.
The team found that as sodium ions move through the battery, the misorientation of crystal layers inside individual particles increases before the layers suddenly align just prior to the P2-O2 phase transition.
“We’ve discovered a new critical mechanism,” Singer said. “During battery charge, the atoms suddenly realign and facilitate that flawed phase transformation.”
The team was able to observe the phenomenon after developing a new X-ray imaging technique using the Cornell High Energy Synchrotron Source, which allowed them to observe, in real time and in mass scale, the behavior of single particles within their battery sample.
“The unexpected atomic alignment is invisible in conventional powder X-ray diffraction measurements as it requires seeing inside individual cathode nanoparticles,” Singer said. “Our unprecedented high-throughput data allowed us to reveal the subtle, yet critical, mechanism.”
The finding led the team to propose new design options for the type of sodium-ion battery they were using, which they plan to investigate in future research projects. One solution is to modify the battery chemistry to introduce a strategic disorder to the particles just before the flawed transition phase, according to Huang.
“By changing the ratios of our transition metals, in this case, nickel and manganese,” Huang said, “we can introduce a bit of disorder and potentially reduce the ordering effect we observed.”
Huang said the new characterization technique can be used to reveal complex phase behaviors in other nanoparticle systems, but its best application may remain in next-generation energy storage technologies.
“We’re pushing the frontiers of sodium-ion batteries and what we know about them,” said Huang, “and using this knowledge to design better batteries will help to unlock the technology for practical applications in the future.”
The research was funded by the National Science Foundation. Collaborators included researchers from the Cornell High Energy Synchrotron Source, the Advanced Photon Source at Argonne National Laboratory, and the University of California, San Diego.
Syl Kacapyr is PR and content manager for the College of Engineering.
Suggested Items
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.
NetVia Group Acquires Direct Imaging from Mivatek
04/09/2024 | Miva TechnologiesMiva Technologies is pleased to announce NetVia Group, Irving, TX has acquired a new Miva 2400NG Dual Tray Direct Imaging System with 30-micron capabilities for inner, outer and soldermask imaging.
Teledyne to Acquire Adimec
02/13/2024 | TeledyneTeledyne Technologies Incorporated announced that it has entered into an agreement to acquire Adimec Holding B.V. and its subsidiaries.
Real Time with... productronica 2023: MivaTek Global Advances Technology With High-res Imaging System
12/08/2023 | Real Time with...productronicaMivaTek's Brendan Hogan talks about how the company employs Digitally Adaptive Rasterization Technology (DART) in their high-res imaging equipment. He also shares how the blurred line between semiconductors and microelectronics is driving broader application of the imaging process.
Keysight Enables Validation of Arbe 4D Imaging Radar Chipset
11/30/2023 | Keysight Technologies, Inc.Keysight Technologies, Inc. announces that Arbe has selected the E8719A Radar Target Solution (RTS) to test the Arbe 4D imaging radar chipset for automotive applications.