Marcy’s Musings: The Legislative Outlook—Helping or Hurting?
It’s Only Common Sense: The Phone Is Still Mightier Than the Keyboard
The Marketing Minute: Marketing With Layers
Atotech to Participate at the IEEE 72nd ECTC
May 24, 2022 | AtotechEstimated reading time: 1 minute
Atotech is looking forward to presenting at the IEEE 72nd Electronic Components and Technology Conference (ECTC). This international event organized by IEEE Electronics Packaging Society will take place in San Diego, California from Tuesday, May 31, to Friday, June 3, 2022.
We are excited to announce that Mr. Kuldip Johal, Global OEM Pathfinding Director will be part of the 2022 ECTC Special Session on “How will IC substrate technology evolve to enable next-generation heterogeneous integration schemes for high- performance applications?” on Tuesday, May 31 from 3:30 p.m. to 5:00 p.m. (PDT).
Additionally, our experts Dr. Britta Schafsteller, Global Product Manager Selective Finishing, and Dr. Tobias Bernhard, Senior Scientist Electronics R&D Desmear and Metallization, will present and share their expertise.
Date: Wednesday, June 1
Time: 2:20 – 2:45 p.m. (PDT)
“Impact of the final finish on the solder joint reliability and IMC
formation after thermal storage”
by Dr. Britta Schafsteller
Date: Friday, June 3
Time: 3:30 – 3:55 p.m. (PDT)
“Plating and recrystallization of galvanic Cu films on roll annealed and polycrystalline Cu foils and the effect of intermediate electroless Cu layers”
by Dr. Tobias Bernhard
Conference:
Electronic Components and Technology Conference (ECTC)
Date: May 31, to June 3, 2022
Booth: #514
Venue: The Sheraton San Diego Hotel and Marina 1380 Harbor Island Drive San Diego, CA 92101
Share on:
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Rehm Wins Mexico Technology Award for CondensoXLine with Formic Acid
10/17/2025 | Rehm Thermal SystemsModern electronics manufacturing requires technologies with high reliability. By using formic acid in convection, condensation, and contact soldering, Rehm Thermal Systems’ equipment ensures reliable, void-free solder joints — even when using flux-free solder pastes.
Indium Experts to Deliver Technical Presentations at SMTA International
10/14/2025 | Indium CorporationAs one of the leading materials providers to the power electronics assembly industry, Indium Corporation experts will share their technical insight on a wide range of innovative solder solutions at SMTA International (SMTAI), to be held October 19-23 in Rosemont, Illinois.
Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
10/14/2025 | Nash Bell -- Column: Knocking Down the Bone PileBall grid array (BGA) components evolved from pin grid array (PGA) devices, carrying over many of the same electrical benefits while introducing a more compact and efficient interconnect format. Instead of discrete leads, BGAs rely on solder balls on the underside of the package to connect to the PCB. In some advanced designs, solder balls are on both the PCB and the BGA package. In stacked configurations, such as package-on-package (PoP), these solder balls also interconnect multiple packages, enabling higher functionality in a smaller footprint.
Indium to Showcase High-Reliability Solder and Flux-Cored Wire Solutions at SMTA International
10/09/2025 | Indium CorporationAs one of the leading materials providers in the electronics industry, Indium Corporation® will feature its innovative, high-reliability solder and flux-cored wire products at SMTA International (SMTAI), to be held October 19-23 in Rosemont, Illinois.
‘Create your Connections’ – Rehm at productronica 2025 in Munich
10/08/2025 | Rehm Thermal SystemsThe electronics industry is undergoing dynamic transformation: smart production lines, sustainability, artificial intelligence, and sensor technologies dominate current discussions.