-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueIn Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
September 23, 2022 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes

It’s officially fall now, and in Atlanta the temperature has plummeted to the mid-80s. We’ve all bumped our air conditioners up to 74 degrees. That means it’s trade show season, and I’ve been busy looking for my suitcase. How does one lose a suitcase? It’s been a while since I’ve traveled anywhere, and I’m ready to go.
This week, we have an assortment of news about associations, education, and advocacy, as well as another installment of our Printed Electronics Roundtable. And if you’re looking for a job, you are in luck; our jobConnect007 section is chock-full of open positions at all levels in this industry.
I’ll see some of you at PCB West. Do you know where your suitcase is?
Register Now for Eric Bogatin’s Transmission Lines 101 Sept. 29-30
Published September 16
Eric Bogatin is presenting his Transmission Lines 101 class next week. It’s an online class, but it’s live, so it’s the best of both worlds, so to speak. Eric doesn’t hold many of these classes, so don’t miss out. He won’t be able to toss you a Snickers bar for a correct answer like he does in his in-person classes, but you know it will be fun and educational.
The Printed Electronics Roundtable, Part 2
Published September 22
Printed electronics continues to gain ground in our industry, and this week we have Part 2 of a roundtable of printed electronics experts. This is one technology that’s been around for years and is now gaining market share with the advent of end-products such as wearables. If you’re interested in printed electronics, you don’t want to miss this.
EIPC Technical Snapshot: Novel Laser-based Manufacturing Processes in Automotive Electronics
Published September 22
Pete Starkey brings us another one of his wonderful and informative reviews of an EIPC Technical Snapshot, this time focusing on laser-based automotive manufacturing. As always, Pete makes you feel like you’re at the event with him, and he provides all the background information that you need to know.
Hire or Be Hired! The jobConnect007 Help Wanted Pages
Published September 21
It’s an interesting time in the job market right now. If you’re looking for a job or a new hire, I-Connect007 has what you need. With jobConnect007, you can find a new position or post a job opening. Check out our help wanted pages; all our magazines feature page after page of open positions throughout our industry.
Electronics Industry Calls for U.S. Presidential Determination on Key Components Under Defense Production Act
Published September 22
When the president of the United States speaks, people pay attention. This week, three industry organizations—IPC, USPAE and PCBAA—sent a letter to President Joe Biden, asking him to address the country’s supply chain vulnerabilities under the Defense Production Act. If the president uses his bully pulpit to champion this cause, it could do us a world of good. Let’s hold a good thought.
Suggested Items
Robotas Technologies Champions Innovation in Through-Hole Assembly with Mascot and VERIFY Systems
06/13/2025 | Robotas Technologies Ltd.While Surface Mount Technology (SMT) dominates today’s electronics manufacturing headlines, Robotas Technologies Ltd. continues to lead the charge in advancing Through-Hole Technology (THT) assembly.
ADCO Circuits Joins Forces with Scanfil
06/13/2025 | ADCO CircuitsADCO Circuits, a trusted provider of high-performance electronic assembly services, has sold a majority interest to Scanfil plc, Europe’s largest EMS company and a global leader in contract manufacturing.
Amtech Introduces Smarter, Cost-Optimized Prototyping Approach for PCB Assemblies
06/13/2025 | AmtechAmtech Electrocircuits, a leading provider of manufacturing solutions, has launched a smarter approach to prototyping that reduces cost and accelerates development for OEMs across industrial, medical, aerospace, and other high-mix, high-complexity sectors.
MES & Industry 4.0 Summit Kicks Off in Porto with Global Manufacturing Leaders
06/12/2025 | Critical ManufacturingMES & Industry 4.0 International Summit, hosted by Critical Manufacturing, officially opened its doors today at the iconic Alfândega Congress Centre in Porto.
L3Harris Providing Additional VAMPIRE Counter-UAS Systems to Department of Defense
06/12/2025 | L3Harris TechnologiesL3Harris Technologies has received a new contract through the U.S. Department of Defense for additional VAMPIRE systems, which neutralize unmanned aerial threats.