nano3Dprint Launches B3300 Dual-Dispensing 3D Printer
October 4, 2022 | PRWEBEstimated reading time: 1 minute
nano3Dprint, a next-generation additive manufacturing solutions provider, announced the launch of its B3300 Dual-Dispensing 3D Printer. The B3300 produces objects like medical devices, wearables, batteries, solar and other functional electronics with embedded circuitry.
The printer’s unique, proprietary dual material dispensing system can print two different materials together to build combined material prints. The B3300 expands users’ range of printing materials - from gold and silver to UV curable polymers and silicone. Full 3D patterns may be printed onto any substrate and combine materials.
A wide viscosity range (1mPa·s to 54000 mPa·s) enables use of highly conductive inks in the B3300. Functional inks and pastes may be printed down to 8 mils (0.20mm) trace width. The printer is also able to quickly print thick layers (500 microns) with high viscosity multi-materials in a single pass, resulting in turnkey electronic items ready for use.
“The B3300 3D printer is a great solution for a wide range of applications. It can print wearables with embedded conductors, cell phone parts with internal antennas and electronic devices with internal sensors,” said Gretta Perlmutter, Product Success Manager, nano3Dprint. “It allows for incorporating sensors, strain gauges, heaters, complex antenna geometries and optical components in a 3D print and provides manufacturing solutions for the medical, agriculture and solar industries, and general consumer electronics.”
“This is a revolutionary development within the electronics 3D printing industry; new combinations of materials difficult to print together, like silicone and gold or dielectrics with semiconductors, can now easily be printed in combination with the B3300,” added Perlmutter.
The printer’s video inspection system allows users to monitor their progress in real time via computer to ensure an error-free high-resolution design print with accurate layer height, surface finishing, tolerance and roundness. The B3300 3D electronics printer is compatible with SD cards and flash drives for direct printing and is small enough to fit on a desktop. ?It is compatible with most CAD or Slicer software and retails for $6,000.
Suggested Items
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.