-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
TTM Technologies Reports Fiscal Q3 2022 Results
November 4, 2022 | TTM Technologies, Inc.Estimated reading time: 2 minutes

TTM Technologies, Inc., a leading global manufacturer of technology solutions including engineered systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and printed circuit boards (PCB), reported results for the third quarter fiscal 2022, which ended on October 3, 2022 and includes a full quarter’s contribution from the acquisition of Telephonics, which closed at the end of the second quarter of 2022.
Third Quarter 2022 Highlights
- Net sales were $671.1 million
- GAAP net income of $43.5 million, or $0.42 per diluted share
- Non-GAAP net income was $57.9 million, or $0.56 per diluted share
- Operating cash flow of $80.0 million; free cash flow of $53.7 million
- Net leverage (net debt divided by last twelve months EBITDA) of 1.8x.
Third Quarter 2022 GAAP Financial Results
Net sales for the third quarter of 2022 were $671.1 million, compared to $556.8 million in the third quarter of 2021.
GAAP operating income for the third quarter of 2022 was $49.8 million. This compares to GAAP operating income of $32.2 million in the third quarter of 2021.
GAAP net income for the third quarter of 2022 was $43.5 million, or $0.42 per diluted share, compared to GAAP net income of $21.0 million, or $0.19 per diluted share in the third quarter of 2021.
Third Quarter 2022 Non-GAAP Financial Results
On a non-GAAP basis, net income for the third quarter of 2022 was $57.9 million, or $0.56 per diluted share. This compares to non-GAAP net income of $36.5 million, or $0.34 per diluted share, for the third quarter of 2021.
Adjusted EBITDA in the third quarter of 2022 was $102.5 million compared to adjusted EBITDA of $68.6 million for the third quarter of 2021.
“In the third quarter, TTM delivered solid growth in revenues in-line with the guided range and up significantly year on year as we saw growth across all of our end markets. Our non-GAAP earnings were also up significantly and were well above the high end of the guided range. On a year on year basis, we also saw meaningful improvement in operating margins. Of particular note, we saw strong cash flow in the last quarter and for the last year as we generated $162.1 million in free cash flow over the last twelve months, and reduced our net leverage to 1.8x, below our 2x target,” said Tom Edman, CEO of TTM. “We also saw record bookings of $319.4 million in the Aerospace and Defense end market excluding Telephonics, and $387.8 million including Telephonics. Post acquisition, approximately 40% of our revenues are now from the Aerospace and Defense end market, which positions the company well for any softening that may occur in our commercial markets,” concluded Mr. Edman.
Business Outlook
TTM estimates that revenue for the fourth quarter of 2022 will be in the range of $630 million to $670 million, and non-GAAP net income will be in the range of $0.36 to $0.42 per diluted share.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/27/2025 | Nolan Johnson, I-Connect007While news outside our industry keeps our attention occupied, the big news inside the industry is the rechristening of IPC as the Global Electronics Association. My must-reads begins with Marcy LaRont’s exclusive and informative interview with Dr. John Mitchell, president and CEO of the Global Electronics Association. For designers, have we finally reached the point in time where autorouters will fulfill their potential?
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
06/25/2025 | Nash Bell -- Column: Knocking Down the Bone PileTin whiskers are slender, hair-like metallic growths that can develop on the surface of tin-plated electronic components. Typically measuring a few micrometers in diameter and growing several millimeters in length, they form through an electrochemical process influenced by environmental factors such as temperature variations, mechanical or compressive stress, and the aging of solder alloys.
RTX, the Singapore Economic Development Board Sign MOU Outlining 10-year Growth Roadmap
06/20/2025 | RTXRTX and the Singapore Economic Development Board (EDB) have signed a Memorandum of Understanding (MoU) which outlines a 10-year roadmap to further long-term strategic collaboration in Singapore.
Indra Signs Agreement with AXISCADES to Boost Production of Cutting-Edge Systems in India
06/18/2025 | PRNewswireParis Air Show -- Indra and the Indian technology company AXISCADES have signed an agreement to collaborate on the production of solutions for the aerospace and defense markets.
GKN Aerospace Delivers First High Voltage EWIS System for Clean Aviation’s SWITCH Project
06/16/2025 | GKN AerospaceGKN Aerospace has completed and delivered the first high voltage Electrical Wiring Interconnection System (EWIS) for the Clean Aviation SWITCH project.