Target Condition: The 5 Ws of PCB Design Constraints
Fresh PCB Concepts: More Than Compliance—A Human-centered Sustainability Approach
Elementary Mr. Watson: Closing the Gap Between Design and Manufacturing
Workflow Challenges in Fabrication
December 22, 2022 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
Q&A with Paul Cooke
The job of the PCB designer is becoming more complicated every day. Designers are now acting as what amounts to project managers for the PCB, and they must be familiar with the many trade-offs that happen during manufacturing, many of which they can control during the design cycle.
Paul Cooke, the senior director of business development for Ventec International Group, is presenting a class at IPC APEX EXPO 2023 that looks at workflow challenges in fabrication, and the myriad drivers that can affect yield, reliability, and cost. Here he discusses the details of this Professional Development course, what he hopes attendees will take away, and why designers and design engineers would benefit from this class.
Q: Paul, tell us a little about the Professional Development Course on process flow and defects you are teaching at the show.
A: I put this course together to give designers, engineers, etc., a more in-depth look at what happens to their design as it goes through the fabrication process. It looks at how the fabricator adjusts processes to meet the design intent and what happens when it goes wrong; it’s like a [IPC] 2221, 6012, 600, and 9121 course all rolled into one. It shows the complexity of the process and how designs can affect the process flow, yield, quality etc. We talk about reliability, for example, of how something like via size can be affected by aspect ratio, layer count, drill parameters, desmear, and material selection and how they would all interact with each other to affect yield, cost, and reliability.
Q: Why should someone attend your class?
A: It’s for anyone wanting to increase their knowledge of the fabrication process. It is aimed at designers and process engineers at any level. The course is designed to be interactive with a lot of questions and hopefully 30 years of knowledge transfer. Time permitting, we may get to cover some emerging technologies.
Q: This sounds like a great class for PCB designers. What are some of the trade-offs designers should be aware of that can affect yield and reliability?
A: There are many factors affecting yield, reliability, and ultimately cost. We will look at each part of the process, discussing how each can be affected, which attributes of the design have the most impact on yield improvement, and how the fabricator achieves the desired level of release.
Q: What is the most important piece of advice you would give your attendees?
A: Attend the course with a lot of questions and take a lot of notes as we will cover a mountain of information. By the end I hope they have a comprehensive knowledge of the process and learn to always talk to a field application engineer prior to setting out on a new type of design, to eliminate any changes later due to cost, capability, yield, etc.
Q: Is there anything else you’d like to add?
A: I hope they all enjoy the course, and I am always looking for feedback, good or bad, so that I can adapt and improve for future classes.
This article originally appeared in the December 2022 issue of Design007 Magazine.
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Ansys 2025 R2 Enables Next-Level Productivity by Leveraging AI, Smart Automation, and Broader On-Demand Capabilities
07/30/2025 | PRNewswireAnsys, now part of Synopsys, announced 2025 R2, featuring new AI-powered capabilities across the portfolio that accelerate simulation and expand accessibility.
Target Condition: The 5 Ws of PCB Design Constraints
07/29/2025 | Kelly Dack -- Column: Target ConditionHave you ever sat down to define PCB design constraints and found yourself staring at a settings window with more checkboxes than a tax form? You’re not alone. For many designers—especially those newer to the layout world—the task of setting up design constraints can feel like trying to write a novel in a language you just started learning.
Zuken to Showcase Defence & Security-Focused Electronic Systems Design Solutions at DSEI 2025
07/24/2025 | ZukenZuken, a global leader in electronic and electrical design automation, will showcase its latest innovations for defence and security systems at DSEI 2025, taking place at ExCeL London from 9–12 September 2025.
Creating a Design Constraint Strategy
07/24/2025 | I-Connect007 Editorial TeamMost designers learn how to set their design constraints through trial and error. EDA vendors’ guidelines explain how to use their particular tools’ constraints, and IPC standards offer a roadmap, but PCB designers usually develop their own unique styles for setting constraints. Is there a set of best practices for setting constraints? That’s what I asked Global Electronics Association design instructor Kris Moyer, who covers design constraints in his classes.
Elementary Mr. Watson: Closing the Gap Between Design and Manufacturing
07/23/2025 | John Watson -- Column: Elementary, Mr. WatsonModern PCB designers are not merely engineers or technicians. I believe that PCB design, at its core, is an art form, and modern PCB designers should be considered artists. Beyond the technical calculations and engineering rules lies a creative process that involves vision, balance, and a passion for what we do. Like any artist who works with brush and canvas or chisel and stone, a PCB designer shapes invisible pathways that bring ideas to life. Each trace, layer, and component placement reflects thoughtful decisions that blend form, fit, and function.