-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
A Focus on Ultra HDI
June 5, 2023 | Nolan Johnson, I-Connect007Estimated reading time: 2 minutes
John Johnson is relatively new to American Standard Circuits, but definitely not new to the technology. In fact, he was hired to focus on business development for ultra-high-density interconnects. John explains more about the process and where it’s taking ASC.
John, how do you define ultra-high density?
I define it as ultra-fine lines, small microvias, sub-4-mils; layer count can vary depending on what the needs are. It can be stacked microvias, multiple stacks up to four, maybe a little bit greater than four—any layer type of technologies.
What's the ASC technology roadmap to UHDI? What do you have and what do you still need? What are the customers asking for?
American Standard became a licensee of Averatek's technology—which is the A-SAP™ process—about a year and a half ago. During that time, ASC has been getting up to speed and running the technology, looking at business, and bringing in commercial opportunities.
Before joining American Standard, I worked for Averatek and had multiple years of experience with the technology; I spent time working on installations at a variety of printed circuit board manufacturing sites. When I came here, it was natural to get that process to the next level. We're now building a lot of test vehicles, prototypes, commercial orders that are quickturns with smaller requirements.
Now we are looking at adding ultra-fine vias. We've done some copper filling on 4-mil diameter through-holes as well.
ASC has been using outside sources for laser. But as we get into this, it's beneficial to have our own laser in-house, so we've recently put in a purchase order to get a brand-new laser drill. We have quite a bit of capital acquisition right now. We've refreshed our strip/etch/strip line (SES), and our inner layer etch/strip line with vacuum etching technology.
Of all these changes, which ones are directly related to UHDI? An additive process is critical to get those sorts of dimensions in a laser drill. Which pieces are necessary to support getting to UHDI?
In a sense, they all are necessary to getting there. We have been getting into other aspects where you have embedded capacitors and resistors. We’ve been working quite closely with the folks at Quantic in terms of the Ticer materials and the OhmegaPly® materials as well.
It all must come together because ultra HDI needs many different aspects. The Averatek process that we're using as our vehicle to get to ultra-fine lines is the cornerstone. But you can't do fine lines without ultra-fine vias. We've added copper filling ability for our microvias and we've been upgrading our plating lines. We're moving to insoluble anode technology with special brighteners and levelers to control the plating distribution better from surface to the via; there are many pieces that make ultra HDI.
To read the rest of this interview, which appeared in the May 2023 issue of PCB007 Magazine, click here.
Suggested Items
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?