Standard of Excellence: Anticipating Customer Needs Early and Often
The Knowledge Base: At the Forefront of Electronics Manufacturing
Global Citizenship: Training the Next Generation of Talent
TRI to Unveil New High-Throughput AOI and AXI at productronica 2023
September 15, 2023 | TRIEstimated reading time: 1 minute
Test Research, Inc. (TRI), the leading test and inspection systems provider for the electronics manufacturing industry, will join productronica 2023, which will be held at Messe München Center from November 14 – 17, 2023. Visit booth No. A2-139 to experience TRI's newly released test and inspection solutions.
TRI will unveil the newly released Ultra-High-Speed 3D AOI, TR7700QH SII, capable of inspecting at speeds of up to 80 cm²/sec, maintaining uncompromised Gauge R&R. The TR7700QH SII is powered by TRI's Smart Programming, AI Algorithms, and Metrology measurement capabilities. Also exhibiting will be the newly released high throughput 3D AXI, TR7600 SV, which offers up to 20% performance improvement compared to the award-winning TR7600 series. Powered by AI Algorithms, the high-speed 3D AXI can precisely detect Void defects.
TRI will showcase the newly released high-speed multi-angle 3D AOI, TR7500QE Plus, equipped with four 20MP side cameras and 1 top high-resolution camera. TRI's lineup will include the enhanced 3D SPI TR7007DI Plus, the high-end 3D AXI TR7600F3D SII, and the Multi-core ICT with In-System LED Analysis function TR5001Q SII INLINE.
The AI solutions from TRI include the AI training tool, the AI Station, Verify Host, AI Smart Programming, and more. TRI Test and Inspection solutions comply with Industry 4.0 standards like the IPC-Hermes-9852, IPC-CFX, and IPC-DPMX.
TRI invites you to visit booth No. A2-139 at productronica 2023. Don't miss the opportunity to discuss with our experts how TRI solutions can enhance your production yield rate, reduce operational costs, and increase efficiency.
Share on:
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
03/28/2025 | Andy Shaughnessy, I-Connect007I’ve spent my week recovering from a busy and interesting week in Anaheim for the 25th IPC APEX EXPO. I think back to my first APEX EXPO, and the changes since then are too numerous to count. I first attended in 2004, also in Anaheim, back when there was almost no design content in the conference or expo portions of the show. It was just a few years after the downturn, and attendees and exhibitors alike were skittish, almost afraid to show confidence in our industry. A few unemployed design friends handed out copies of their resumes. Travel budgets were still down, and the aisles weren’t exactly packed with traffic.
Real Time with... IPC APEX EXPO 2025: Transforming Engineering With Digital Solutions from Zuken
03/27/2025 | Real Time with...IPC APEX EXPOBob Potock discusses Zuken's focus on digital engineering and a move away from traditional document-based processes to model-based designs. This change improves product definition, reduces design errors, and optimizes product parameters. Bob notes that the IPC-2581 standard is crucial for connecting designs, while AI enhances design efficiency.
25 Years of IPC APEX EXPO: Organizer Alicia Balonek Reflects on a Milestone
03/28/2025 | Alicia Balonek, IPCAs I celebrate my 25th work anniversary with IPC, I can’t help but reflect on my incredible journey. From its inception in 2000, IPC APEX EXPO has evolved into one of the most anticipated and dynamic events in the electronics industry, and I’m proud to have been a part of its growth every step of the way.
EIPC Summer Conference 2025: Call for Distinguished Speakers in Edinburgh
03/26/2025 | EIPCThe European Institute of Printed Circuits (EIPC) is pleased to announce its Summer Conference 2025, scheduled for June 3-4 in the historic city of Edinburgh, Scotland.
Real Time with... IPC APEX EXPO 2025: Blackfox—The Future of the Electronics Manufacturing Industry Depends on Training
03/26/2025 | Real Time with...IPC APEX EXPOBlackfox's Levi Gibbon is a newcomer to IPC APEX EXPO, but he has been in electronics manufacturing since 1999. In this interview, he focuses on quality assurance and teaching. He discusses the challenges posed by an aging workforce and the urgent need for new talent as experienced trainers retire.