-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueIn Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
August 2, 2024 | Andy Shaughnessy, I-Connect007Estimated reading time: 2 minutes

This week, we bring you a veritable smorgasbord of news, columns and articles from the past week.
After getting stuck in an airport during the Crowdstrike outage, our colleague Nolan Johnson has a review of the first-ever THECA trade show in Bangkok, Thailand. We have a column by Matt Stevenson on drilling optimization, and an interview with Schmoll America President Kurt Palmer about what it takes to thrive in this industry. We have an article by SMTA’s Tara Dunn that focuses on the organization’s educational offerings, and news about All Flex joining the PCBAA.
It's been a busy week. I hope you all have a great weekend!
Impressions from THECA 2024
Published July 31
Our weary editor Nolan Johnson brings us his review of the inaugural Thailand Electronic Circuits Asia trade show. Nolan had the bad luck to be heading to the airport when the Crowdstrike snafu first began, turning his already-long trip to Bangkok into a three-day ordeal. He says it was all worth it, and THECA drew a pretty good crowd of attendees, many looking to Thailand for its China+1 potential. Check it out.
Connect the Dots: Navigating the Intricacies of PCB Drilling
Published August 1
Drilling is a fairly simple operation, but it can be one of the most complex tasks in the PCB fabrication cycle. In this column, Matt Stevenson offers various tips and tricks that can streamline your PCB drilling, beginning with pre-drilling planning and preparations.
Schmoll America: Thriving in the Global PCB Market
Published July 31
Is your business thriving? What does it take to thrive in this industry? In this interview with Marcy LaRont, Kurt Palmer, president of Schmoll America, discusses what it takes to not only survive, but thrive.
Training and Education in the Electronics Industry
Published July 31
With many of the “silverbacks” in our industry heading toward retirement, educational resources are in high demand now. Tara Dunn, director of training and education for SMTA, walks us through the organization’s educational offerings, including webinars, in-person classes, technical papers, and much more.
The PCBAA Accepts All Flex Solutions as Newest Member
Published July 31
PCBAA was founded just a few years ago, but it’s been on a continuous growth path, with more companies joining the organization in its mission to advocate for U.S. PCB companies. Flexible circuit maker All Flex Solutions is the latest company to join the organization, which now numbers 61 PCB U.S. manufacturers.
Suggested Items
Uyemura Expands Engineering Team in Great Lakes Region
05/30/2025 | UyemuraAndrew Jin has joined Uyemura’s Engineering Team as Technical Service Engineer for the Midwest. Jin was formerly with Sensient Technologies, Flavors and Extracts Division, where his focus was CO2 emissions and water quality; he also did capital project work with production equipment.
WellPCB, OurPCB Launch Low-Cost PCB Assembly and Custom Cable Assembly Solutions
05/29/2025 | ACCESSWIREWellPCB and OurPCB, world leading PCB manufacturing service providers, announced today that they have officially launched new Low-Cost PCB Assembly Solutions and Custom Cable Assembly services to meet the needs of the electronics manufacturing industry for high cost performance and flexible customization.
Standards: The Roadmap for Your Ideal Data Package
05/29/2025 | Andy Shaughnessy, Design007 MagazineIn this interview, IPC design instructor Kris Moyer explains how standards can help you ensure that your data package has all the information your fabricator and assembler need to build your board the way you designed it, allowing them to use their expertise. As Kris says, even with IPC standards, there’s still an art to conveying the right information in your documentation.
High-frequency EMC Noise in DC Circuits
05/29/2025 | Karen Burnham, EMC UnitedEMC isn’t black magic, but it’s easy to understand why it seems that way. When looking at a schematic like that in Figure 1, it looks like you’re only dealing with DC signals all across the board. There’s a 28 VDC input that goes through an EMI filter, then gets converted to 12 VDC power. Except in extremely rare circumstances involving equipment sensitive to magnetostatic fields, DC electricity will never be part of an EMC problem.
Canada PCB Market Report 2025-2030: Strong Growth Projected Amid EV Boom, 5G Rollout, and Defense Investments
05/29/2025 | Globe NewswireCanada Printed Circuit Board Market is projected to grow at a CAGR of 4.5% from 2025-2031F. The Canada PCB market is set for robust growth in the coming years, driven by several factors.