Target Condition: Are Autorouters Friend or Foe?
Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
Silicon to Systems: A Wake-up Call for the Industry
September 26, 2024 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 1 minute
Duane Benson, founder of Positive Edge, has been working with silicon and packaging for longer than some of our newer readers have been alive. We asked him to share his thoughts on silicon to systems, which Duane says is much more than a buzzword—it’s a wake-up call for the industry.
Andy Shaughnessy: We’re seeing more technologists pointing out the need for PCB designers to focus on silicon to systems. What does this term mean to you?
Duane Benson: Silicon to systems implies a holistic approach to design. It means that someone designing a component or subsystem will produce a better product by considering the entire system, from the supply chain through design and to the purchasers and users of the product. In other words, don’t design a product that can’t be built or that doesn’t really fit a need, and while designing it, communicate with others on the overall design team.
Shaughnessy: Many designers don’t know much about what happens at the silicon level, mainly because they’ve never really had to learn. What are the most important things that PCB designers need to understand about silicon?
Benson: Digging deep isn’t a requirement for many products. A lot of good designs have come from engineers who understand the way something works, but not the physics or chemistry underneath. That being said, I think that understanding the silicon level is becoming more important as speeds and density increase. Many engineers still think in terms of analog vs. digital electronics. They even design mixed signal electronics from the perspective of one side or the other. It’s not so simple anymore. In anything but the most basic of design levels now, that distinction is less relevant. Microcontrollers (MCUs) and systems on chip (SoC) mix analog, digital, and even programmable logic in the same part. On the leading edge, speeds are so fast that you can’t really look at it as either digital or analog. When designing in those regimes, even the electron physics becomes relevant.
To read this entire conversation, which appeared in the September 2024 issue of Design007 Magazine, click here.
Share on:
Suggested Items
DownStream Acquisition Fits Siemens’ ‘Left-Shift’ Model
06/26/2025 | Andy Shaughnessy, I-Connect007I recently spoke to DownStream Technologies founder Joe Clark about the company’s acquisition by Siemens. We were later joined by A.J. Incorvaia, Siemens’ senior VP of electronic board systems. Joe discussed how he, Rick Almeida, and Ken Tepper launched the company in the months after 9/11 and how the acquisition came about. A.J. provides some background on the acquisition and explains why the companies’ tools are complementary.
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
06/26/2025 | John Watson -- Column: Elementary, Mr. WatsonThere's a story about a young woman preparing a holiday ham. Before putting it in the pan, she cuts off the ends. When asked why, she shrugs and says, "That's how my mom always did it." She asks her mother, who gives the same answer. Eventually, the question reaches Grandma, who laughs and says, "Oh, I only cut the ends off because my pan was too small." This story is a powerful analogy for how many PCB designers approach routing today.
Connect the Dots: The Future of PCB Design and Manufacturing
07/02/2025 | Matt Stevenson -- Column: Connect the DotsFor some time, I have been discussing the increasing complexity of PCBs and how designers can address the constantly evolving design requirements associated with them. My book, "The Printed Circuit Designer’s Guide to… Designing for Reality," details best practices for creating manufacturable boards in a modern production environment.
Siemens Turbocharges Semiconductor and PCB Design Portfolio with Generative and Agentic AI
06/24/2025 | SiemensAt the 2025 Design Automation Conference, Siemens Digital Industries Software today unveiled its AI-enhanced toolset for the EDA design flow.
Cadence AI Autorouter May Transform the Landscape
06/19/2025 | Andy Shaughnessy, Design007 MagazinePatrick Davis, product management director with Cadence Design Systems, discusses advancements in autorouting technology, including AI. He emphasizes a holistic approach that enhances placement and power distribution before routing. He points out that younger engineers seem more likely to embrace autorouting, while the veteran designers are still wary of giving up too much control. Will AI help autorouters finally gain industry-wide acceptance?