The Shaughnessy Report: Watt About Power Integrity?
Global PCB Connections: Understanding Your Fabricator’s Capabilities (or Niche)
Elementary Mr. Watson: Chasing Checkmarks, Not Signal Integrity
Learning to Speak ‘Fab’
April 23, 2025 | Ray Fugitt, DownStream TechnologiesEstimated reading time: 1 minute
Over the years, I’ve seen many PCB designers make DFM mistakes. At DownStream, I work with design and fabrication, and sometimes it feels as if the two segments are speaking completely different languages. But once designers learn to speak “fab,” many of these DFM challenges disappear.
I taught a class at PCB East 2024, “The 21 Most Common Design Errors Caught by Fabrication (and How to Prevent Them),” with my co-presenter Mike Tucker of Millennium Circuits. At PCB West 2024, we presented an updated class, “10 (More) Common Errors in PCB Design and How to Catch Them.” Is this an evergreen topic?
Design007 Editor Andy Shaughnessy and columnist Kelly Dack attended our PCB West class, which was packed with designers and design engineers, and many of them had questions. When Andy asked me to contribute an article on the most common miscommunication errors made by PCB designers, I said, “Sign me up.”
You Know the Drill
Let’s start with the drill chart shown in Figure 1. It seems like a normal drill chart at first. But take another look. What is a “finished drill size” anyway? Do they mean hole size? What’s the difference?
To read this entire article, which appeared in the March 2025 issue of Design007 Magazine, click here.
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Si2 Names NVIDIA, Synopsys Technologists to Lead New LLM Benchmarking Coalition
10/10/2025 | BUSINESS WIREThe Silicon Integration Initiative today announced the chair and vice chair of the Si2 Large Language Model Benchmarking Coalition (LBC), a collaborative industry initiative and standards body advancing AI for silicon design and verification that will expedite the development of high-quality large language models for semiconductor design problems.
Quilter Secures $25M Series B to Eliminate Manual PCB Design with Physics-Driven AI
10/09/2025 | BUSINESS WIREQuilter, the first and only company to publicly demonstrate fully autonomous PCB layout through physics-driven AI, announced $25 million in Series B funding led by Index Ventures.
The Shaughnessy Report: Watt About Power Integrity?
10/08/2025 | Andy Shaughnessy -- Column: The Shaughnessy ReportYes, that headline is the equivalent of a dad joke, but editors can’t pass up a chance to inject a little humor into a headline, and I had to take my shot. Power integrity (PI) problems are no joke. Current power demands are increasing, especially with AI, 5G, and EV chips, which can lead to voltage drops that kill your performance.
Taking Control of PCB Verification One Step at a Time
10/09/2025 | Kirk Fabbri, Siemens EDAToday’s designs are as complex as ever, and engineers face tough decisions every day. Simulation and verification teams are confronted with a three-fold challenge: understanding the underlying theory, mastering the tools, and applying best practices.Engineers need to navigate a vast and ever-changing cast of design and simulation tools, often with overlapping functionality.
ICT Symposium Review: Sustainability and the Circular Economy
10/09/2025 | Pete Starkey, I-Connect007It was pleasant autumnal weather as we made our way once again to Meriden, the nominal centre of England, for the 2025 Annual Symposium of the Institute of Circuit Technology. Delegates were welcomed by technical director Emma Hudson who introduced and moderated a skilfully coordinated programme, focused on the highly relevant theme of sustainability.