SMT Perspectives & Prospects: Artificial Intelligence Part 6: Data Module 1
Standard of Excellence: Overcoming Service Failures: The Art of the Apology
Nolan’s Notes: Tariffs, Technologies, and Optimization
Rework Challenges for Smartphones and Tablets
November 19, 2014 |Estimated reading time: 1 minute
Smartphones are complex, costly devices and therefore need to be reworked correctly the first time.
To meet the ever-growing demand for performance, the complexity of mobile devices has increased immensely, with 70% more packages now found inside a mobile device than just a few years ago. For instance, a 1080P HD camera with video capabilities is now available on most high-end smartphones or tablet computers, making their production more elaborate and expensive.
The printed circuit boards for these devices are no longer considered disposable goods, and their bill of materials start from $150, with higher-end smartphones going up to $238, and tablets well over $300.
The implementation of surface mount devices is crucial for smartphone manufacturers, offering increased component density and improved performance. For example, the newer style DDR memory integrated components use less power and work at twice the speed of former versions. It is not surprising that most component manufacturers now produce these surface mount devices as small as 1 mm square.
Mobile products generally use an epoxy underfill to adhere components to the printed circuit board to meet the mechanical strength requirements of a drop test. Reworking glued components is the most difficult application in the electronics industry, and must be addressed as a process.
Rework Challenges
The removal of a glued component from a PCB assembly requires a specific order of operations. The first step is to remove the glue fillet located between the component and the circuit board. Mobile products generally have many types of components glued to the PCB in order to meet the industry standards outlined in JESD22-B111 Board Level Drop Test Method of Components for Handheld Electronic Devices and JESD22-B110 Subassembly Mechanical Shock. The epoxy is applied to the components to prevent the common failure modes of cracks in the laminate, cracks near the intermetallic, and cracks in the bulk solder. The addition of the epoxy increases the robustness of the design and enhances reliability for the user.
Read the full article here.
Editor's Note: This article originally appeared in the November 2014 issue of SMT Magazine.
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Quilter Secures $25M Series B to Eliminate Manual PCB Design with Physics-Driven AI
10/09/2025 | BUSINESS WIREQuilter, the first and only company to publicly demonstrate fully autonomous PCB layout through physics-driven AI, announced $25 million in Series B funding led by Index Ventures.
ICT Symposium Review: Sustainability and the Circular Economy
10/09/2025 | Pete Starkey, I-Connect007It was pleasant autumnal weather as we made our way once again to Meriden, the nominal centre of England, for the 2025 Annual Symposium of the Institute of Circuit Technology. Delegates were welcomed by technical director Emma Hudson who introduced and moderated a skilfully coordinated programme, focused on the highly relevant theme of sustainability.
Green Circuits Boosts Midwest Presence with New Regional Sales Manager Ray Ponder
10/08/2025 | Green CircuitsGreen Circuits, a full-service Electronics Manufacturing Services (EMS) partner to leading OEMs, today announced the appointment of Ray Ponder as Regional Sales Manager for the Midwest region.
Catching Up With Mark Wood, Microart Services
10/08/2025 | Dan Beaulieu, D.B. Management GroupMicroart Services has been in business for over 40 years, growing from a design PCB layout company to a full-service EMS company focused on serving its customer base with standard and custom solutions. I’ve heard from my rep friends, their competitors, and even my Canadian PCB friends that Microart is “one of the best EMS companies in North America.” That’s why I decided to speak with CEO Mark Wood to discover the secret to his company's success.
Dymax's New 9773 Ruggedized Adhesive Meets NASA ASTM E595 Low Outgassing
10/07/2025 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, is pleased to add 9773 ruggedizing and staking adhesive to its portfolio of materials designed for coating, protecting, and securing components on printed circuit boards in satellites, missiles, and space applications.