-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueDo You Have X-ray Vision?
Has X-ray’s time finally come in electronics manufacturing? Join us in this issue of SMT007 Magazine, where we answer this question and others to bring more efficiency to your bottom line.
IPC APEX EXPO 2025: A Preview
It’s that time again. If you’re going to Anaheim for IPC APEX EXPO 2025, we’ll see you there. In the meantime, consider this issue of SMT007 Magazine to be your golden ticket to planning the show.
Technical Resources
Key industry organizations–all with knowledge sharing as a part of their mission–share their technical repositories in this issue of SMT007 Magazine. Where can you find information critical to your work? Odds are, right here.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - smt007 Magazine
Reliability Assessment of No-clean and Water-soluble Solder Pastes, Part II
May 6, 2015 | Emmanuelle Guéné and Steven Teh, Inventec Performance ChemicalsEstimated reading time: 2 minutes

Note: Part 1 of this article published in the March 2014 issue of SMT Magazine, available here.
Twenty-five years ago, solder paste residues had to be cleaned after reflow due to their corrosive nature: two ways of cleaning were available, either with solvent or by using water, with or without detergent. Now, the assembly world is mainly no-clean: paste formulation is safer in terms of chemical reliability and process costs are reduced without cleaning. However, some applications (i.e., military, aerospace, high-frequency, and semiconductor) require a perfect elimination of the residue after reflow. Several options can achieve this result: a no-clean paste which allows residue to be removed with the most suitable cleaning method, or a paste designed to be cleaned, such as a water-soluble solder paste.
Water-soluble solder pastes generally show great wettability because of their strong activation but they are also known to have shorter stencil life and to be more sensitive to working conditions as temperature and humidity, compared to the no-clean pastes. Additionally, with the components stand-off getting smaller and smaller, washing residues with water only is more and more challenging due to its high surface tension: the addition of detergent becomes often necessary.
The purpose of this article is to highlight the differences between these two families of solder pastes to guide users in their choice. This will be achieved through the comparison of several recent water-soluble and no-clean formulations as far as reliability is concerned. First, the printing quality will be evaluated (viscosity, tack, cold slump, printing speed according to pressure, stencil life, idle time, printing consistency). Next, the reflow properties will be compared (hot slump, solderballing, reflow process window, wetting ability on different finishes).
Finally, the residue cleanability will be assessed. The IPC SIR will be also done to conclude the study. Both standardized tests and production tests will be used to evaluate the performance of these two kinds of solder pastes.
Introduction
Six lead-free pastes were extensively studied, three being water-soluble and three being no-clean. The first part of the study focused on printing performance. The pastes were characterized using standardized tests and internally developed tests: dynamic viscosity, tackiness, slump and solderballing. The influence of accelerated storage at elevated temperature, the influence of time and conditions between printing and reflow and the influence of continuous shear according to time were shown. The printing performances were also evaluated in a printer. Although the number of pastes studied was restricted, the water- soluble pastes generally yielded results below the no-clean pastes with more sensitivity to temperature and humidity, tendency to slump during preheat and narrower printing window. Water- soluble solder pastes must be stored, handled and used with more caution before reflow.
In the second part of the paper, the reflow properties will be compared: wettability, reflow process window, anti-graping properties. Finally the residue cleanability with water, then with water and detergents will be examined. The cleanliness will be assessed using visual inspection, ionic contamination and surface insulation resistance tests.
Editor's Note: This article originally appeared in the April issue of SMT Magazine.
Suggested Items
KYZEN Focuses on Aqueous Cleaning and Stencil Cleaning at SMTA Wisconsin
04/24/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Wisconsin Expo and Tech Forum, scheduled to take place Tuesday, May 6 at the Crowne Plaza Milwaukee Airport. KYZEN will be on-site to provide attendees with information about aqueous cleaning chemistry AQUANOX A4618 and stencil cleaner KYZEN E5631J.
SMTA Bridging the Skills Gap in Arizona
04/24/2025 | Marcy LaRont, I-Connect007One area where SMTA really excels is through its local chapters. On April 16, 2025, I-Connect007's Marcy LaRont attended the Workforce Breakfast during the SMTA Arizona Expo & Tech Forum in Mesa, which featured more than 50 electronics professionals from the local area, including defense OEMs, and others who were attending for the first time. Blackfox and Hyrel Technologies sponsored the event. The keynote presentation featured Sean Denny, a professor at Estrella Mountain Community College, who emphasized a clear need for skilled hand soldering technicians.
IPC Releases Version 2.0 of IPC-2591, Connected Factory Exchange, with Expanded Device Coverage and Smarter Data
04/23/2025 | IPCIPC announces the release of IPC-2591, Connected Factory Exchange (CFX), Version 2.0, the global standard for plug-and-play, machine-to-machine, and machine-to-system communication for digital manufacturing.
ViTrox Marks 25 Years of Innovation with Cutting-Edge Solutions at NEPCON China 2025 in Shanghai
04/18/2025 | ViTrox TechnologiesViTrox, which aims to be the World’s Most Trusted Technology Company, is proud to announce its participation in NEPCON China 2025, taking place from April 22–24, 2025, at Booth #1E45, Shanghai World Expo Exhibition & Convention Centre (SWEECC).
Indium Experts to Present on Power Electronics at PCIM Europe 2025
04/17/2025 | Indium CorporationAs one of the leading materials providers to the power electronics assembly and e-Mobility industries, Indium Corporation experts will share their technical insight and knowledge on a variety of industry-related topics throughout PCIM Europe, May 6-8, in Nuremberg, Germany.