Connect the Dots: Sequential Lamination in HDI PCB Manufacturing
Target Condition: The 5 Ws of PCB Design Constraints
Fresh PCB Concepts: More Than Compliance—A Human-centered Sustainability Approach
The Past, Present, and Future of IPC-A-610
July 8, 2015 | IPCEstimated reading time: 1 minute
Since 1983, IPC-A-610, Acceptability of Electronic Assemblies, has been the standard used by organizations interested in understanding the acceptability criteria for electronic assemblies around the world.
To understand the ultimate power of IPC-A-610, you need to first understand what is at the core of this standard. IPC-A-610 is a collection of visual quality acceptability requirements for electronic assemblies. It is utilized as a post-assembly acceptance standard to ensure that electronic assemblies meet acceptance requirements.
IPC-A-610 is an essential document in an electronic assembler’s library. Not only is it necessary to have the proper material and tools, but it is also important to have clearly defined acceptance criteria. IPC-A-610 provides that criteria developed and accepted by representatives from some of our industry’s leaders.
Most often, IPC-A-610 is used as a companion document to other standards. While there is much overlap in criteria for these compatible standards, each has a unique purpose. The development and evolution of IPC-A-610 falls largely on a unified task group, which consists of volunteers who often work together on other standards as well. It is because of this that so many standards are able to operate as companion pieces. For example, IPC J-STD-001 is a material and process requirements standard that is critical for use during manufacturing. The volunteers developing these two standards often have synergy meetings where they address changes to both documents at the same time.
Specifically for the ongoing development and maintenance of IPC-A-610, it is an industry consensus document prepared by subject matter experts from the electronics industry. The committee consists of more than 200 volunteers representing their companies, organizations, and interests of the industry. It is a truly collaborative project.
On top of that, IPC-A-610 is a global document, readily able to assist electronic assemblies around the world. For example, previous revisions of IPC-A-610 were translated into as many as 20 languages. This expands the reach of the standard, solidifying its usability in the global market. It is all about sharing knowledge and inspiring growth to create a competitive market within the electronics industry.
To read this article, which appeared in the June 2015 issue of The PCB Design Magazine, click here.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Creating Connections in Mexico
07/30/2025 | Michelle Te, Community MagazineA concerted effort by the Global Electronics Association—Mexico team over the past year has created inroads for the Global Electronics Association (formerly IPC) with leading electronics companies, government offices, and academic institutions in Mexico. “Our goal is to bring more awareness to what the Global Electronics Association is and what it offers,” says Lorena Villanueva, senior director. “We also aim to increase our membership. Of 3,200 members of the Global Electronics Association, only 180 are in Mexico.”
Powering Progress: Summer 2025 Community Magazine Now Available
07/22/2025 | Community MagazineIn the new Summer 2025 edition of Community Magazine, members of the Global Electronics Association demonstrate what progress really looks like—through innovation on the factory floor, influence on public policy, and investment in the next generation of engineers.
TRI to Exhibit at SMTA Queretaro Expo 2025
07/16/2025 | TRITest Research, Inc. (TRI), the leading provider of test and inspection systems for the electronics manufacturing industry, is pleased to announce plans to exhibit at the SMTA Querétaro Expo 2025, scheduled to take place on July 24, 2025, at the Querétaro Centro de Congresos y Teatro Metropolitano.
Global PCB Connections: Let the Spec Fit the Board, Not Just the Brand
07/17/2025 | Jerome Larez -- Column: Global PCB ConnectionsIf you’ve ever seen an excellent PCB quote delayed, or worse, go cold because of a single line on the fab print, you’re not alone. Often, that line reads something like, “Use 370HR only,” or “IT-180A required.” These and other brand-name materials are proven performers, but unless your design needs that specific resin system (say, for RF performance, thermal reliability, or stringent CAF resistance), you may inadvertently be holding your job hostage.
IPC Hall of Fame Spotlight Series: Highlighting Lionel Fullwood
07/15/2025 | Dan Feinberg, I-Connect007Many IPC members who have contributed significantly to IPC and our industry have been awarded the IPC Raymond E. Pritchard Hall of Fame (HOF) Award. Though many early HOF members have passed away and are unknown to today’s IPC membership, their contributions still resonate. This special series on IPC Hall of Fame members provides a reminder of who was honored and why. As a bonus, for those who are still around, we get to find out what these talented individuals are up to today.