TrendForce: Global DRAM Industry Revenue Down 4.8% in Q2
August 14, 2015 | TrendForceEstimated reading time: 2 minutes
DRAMeXchange, a division of TrendForce, reports the global DRAM industry revenue reached US$11.4 billion in the second quarter, down by 4.8% from the previous quarter. Industry revenue fell despite bit supply growth due to an about 10% quarterly decline in the average contract price. All DRAM makers experienced revenue decline during the off-peak season, but their margins did not shrink significantly as they continue to advance their process technology. Samsung, SK Hynix and Micron’s operating profits were respectively 48%, 37% and 21%. The real test for the DRAM industry will arrive in the next few quarters. Weak demands persist in the notebook and smartphone markets, and the 20 and 21nm processes are increasing the DRAM supply at the same time. DRAMeXchange therefore expects the decline of DRAM prices to extend further in the future.
"In terms of global DRAM market share based on revenue, Samsung and SK Hynix respectively took 45.1% and 27.7% in the second quarter," said DRAMeXchange’s Assistant Vice President Avril Wu. "Together, the top two suppliers accounted for over 70%." Conversely, Micron’s market share fell to around 20.6% during the same period mainly because of falling prices and lack of bit supply growth."
In terms of manufacturing process, Samsung has proven its technological prowess yet again with their newest 20nm process. The course of the migration has been smooth and the yield rate is stable. More importantly, the migration schedule is ahead of all its competitors by six months to a year. Presently, PC and server DRAM are the main products on Samsung's 20nm process, but the DRAM maker will expand into other product categories soon and maintain a huge cost advantage as DRAM prices continue to drop. SK Hynix's most advanced 21nm process is still at the beginning of the pilot run, and sample deliveries have been pushed back to the end of the third quarter. Mass production is expected to begin in the first quarter of 2016, roughly the same as the schedule of Micron's 20nm process. Micron on the other hand has not made any significant breakthroughs in its process technology since the previous quarter, so most of its products are still manufactured on the 30nm process. Compared with its two Korean rivals, Micron is encountering much higher costs.
As for Taiwanese DRAM makers, Nanya's migration to the 30nm design shrink technology is currently on schedule, and the output ratio of this advanced process will reach 60% by the end of this year. Nanya's 20nm process will not enter mass production until the second half of 2016, when its new fabrication plant is built. Nanya’s second-quarter revenue dropped slightly by 5.1%. Inotera was hit hard in the second quarter as their product mix consists of mostly PC and server DRAM, both of which experienced the most severe price decline. Inotera is also behind the industry leaders in the 30nm process migration. Consequently, its gross margin fell from 47.2% in the first quarter to 34.9% in the second. Powerchip, which mostly produces PC DRAM as a foundry service, saw sequential revenue decline in the second quarter. The DRAM maker has begun sample production on the 25nm process, which will enter mass production early next year if there is no change to schedule. While Winbond does not produce PC DRAM, the high-density specialty DRAM market has also been subject to price wars. Set against the prior period, Winbond’s second-quarter revenue fell by 8.5% and its second-quarter operating profit dropped to 11.2%.
Suggested Items
Argonne, Toyota Collaborate on Cutting-Edge Battery Recycling Process
05/01/2024 | BUSINESS WIREThe U.S. Department of Energy’s (DOE) Argonne National Laboratory has recently launched a collaboration with Toyota Motor North America that could reduce the nation’s reliance on foreign sources of battery materials.
Real Time with… IPC APEX EXPO 2024: Outlining Rehm's Innovations and Global Presence
05/01/2024 | Real Time with...IPC APEX EXPOMichael Hanke, the chief sales officer for Rehm Thermal Systems, shares insights on the North American market, new machinery, and software development. He also discusses Rehm's turnkey solutions, process flexibility, global presence, and the dedicated team of 700 employees working on global solutions.
The Knowledge Base: A CM’s Perspective on Box Build Practices
04/30/2024 | Mike Konrad -- Column: The Knowledge BaseIn the ever-evolving landscape of electronics manufacturing, the box-build process stands out as a critical phase that bridges the gap between individual component manufacturing and the delivery of a fully functional electronic system. This intricate procedure, encompassing the assembly of everything from PCBs to wire harnesses and mechanical enclosures, demands a high level of precision, efficiency, and innovation. As the electronics assembly industry expands and diversifies, understanding the best practices within box-build assembly has become paramount for manufacturers aiming to stay ahead in a competitive market.
TSMC Certifies Ansys Multiphysics Platforms, Enabling Next-Gen AI and HPC Chips
04/30/2024 | PRNewswireAnsys announced the certification of its power integrity platforms for TSMC's N2 technology full production release. Both Ansys RedHawk-SC and Ansys Totem are certified for power integrity signoff on the N2 process, delivering significant speed and power advantages for high performance computing, mobile chips, and 3D-IC designs.
Koh Young Showcases Award-winning Inspection Solutions at SMTconnect with SmartRep in Hall 4A.225
04/25/2024 | Koh Young TechnologyKoh Young Technology, the industry leader in True 3D measurement-based inspection solutions, will showcase an array of award-winning inspection and measurement solutions at SMTconnect alongside its sales partner, SmartRep, in booth 4A.225 at NürnbergMesse from June 11-13, 2023. The following offers a glimpse into what Koh Young will present at the tradeshow: