Over 50% of LCD Panels for TVs to Adopt GOA Design in Second Half of 2016
May 12, 2016 | TrendForceEstimated reading time: 2 minutes
According to WitsView, GOA has already been incorporated into the design of the IT and smartphone panels for some time, but this solution just began to make rapid inroads in the TV panel market around the second half of 2015. The GOA design can effectively cut cost by eliminating the need for Gate IC components that are used to switch the backplane transistors on or off.
Using a 55-inch LCD TV panel as an example, the traditional TFT-LCD design would require four and eight Gate ICs respectively for FHD and 4K resolutions. The GOA design by contrast would require none for the same size panel for both resolution specs. The absence of the Gate ICs would in turn bring down the production cost by 2~3%. Additionally, removing Gate IC allows the left and right borders of a display to become thinner. GOA panels therefore can be used to develop a variety of narrow-bezel or bezel-less display systems.
South Korean panel makers are more mature in the development of the GOA solutions, says WitsView. Currently, all of their new panel products in sizes 65 inches and under are based on the GOA design. While Taiwanese and Chinese panel makers are behind in progress, they are planning to start applying this technology to mass-volume products (e.g. 32-, 40- and 50-inch panels) in the second half of this year.
The widespread adoption of GOA in the display industry has dampened the earlier optimism of IC manufacturers about 4K TVs becoming mainstream. The initial expectation from the IC industry was that display application products would boost the overall revenue and shipments because the IC usage volume for an LCD panel was supposed to grow in correlation with the increase in resolution. GOA, however, has challenged this assumption.
About Gate-on-Array (GOA):
An LCD TV panel based on the conventional design requires two types of driver ICs – the Source IC at the bottom of the panel and the Gate IC on the side of the panel. The former controls the voltages that acts as signals to the transistors on the backplane, while the latter switches the transistors on/off. The interactions between the two ICs ultimately control the color of each pixel cell on the display by regulating the amount of the light passing through each cell.
GOA is a design that integrates Gate IC function into the TFT-Array process, so there is no need for a separate IC component attached to the side of the panel. This solution therefore saves panel production cost and reduces the thickness of left/right borders of the display system.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
Synopsys, Samsung Electronics Collaborate to Achieve First Production Tapeout of Flagship Mobile CPU
05/03/2024 | PRNewswireSynopsys, Inc. announced that Samsung Electronics has achieved successful production tapeout for its high-performance mobile SoC design, including flagship CPUs and GPUs, with 300MHz higher performance using Synopsys.ai™ full stack AI-driven EDA suite and a broad portfolio of Synopsys IP on Samsung Foundry's latest Gate-All-Around (GAA) process technologies.
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/03/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.
Real Time with… IPC APEX EXPO 2024: Software Solutions for Circuit Board Challenges
05/03/2024 | Real Time with...IPC APEX EXPONolan Johnson speaks with Will Webb from Aster Technologies about their software solutions for design teams, manufacturing, test engineers, and process engineers. Aster's software addresses the increasing complexities of circuit boards and the need for alternative testing methods.
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.