Dan’s Biz Bookshelf: ‘Born to Create’
It’s Only Common Sense: Invest in Yourself—You’re Your Most Important Resource
Marcy's Musings: Engineering Economics
Rogers to Exhibit High-Performance Circuit Materials at PCB West
September 12, 2016 | Rogers CorporationEstimated reading time: 3 minutes
Rogers Corporation will bring its materials expertise to PCB West on September 14 at the Santa Clara Convention Center (Santa Clara, CA), booth 201. Rogers will exhibit its high-performance circuit materials in addition to supporting a technical symposium for printed-circuit-board (PCB) users and designers with a presentation on the effects of conductor metal surface roughness on high-frequency PCB performance.
Rogers will show a sampling of its material-based solutions, including 92ML™ thermal management materials. Designed to dissipate heat in high-power applications, thermally enhanced 92ML laminates and prepregs are halogen-free, flame-retardant thermally conductive epoxy-based thermoset materials with outstanding heat-transfer characteristics. They provide a cost-effective, lead-free-solder-compatible solution for effectively dissipating heat in multilayer circuit designs.
With a glass transition temperature (Tg) of +160C and high thermal conductivity of 2.0 W/m•K, 92ML materials can be supplied with copper cladding to 4 oz. thickness, to handle the most demanding heat-transfer requirements in power supplies and automotive electronics. When even greater cooling capability is needed, 92ML StaCool™ laminates are available with an insulated metal substrate (IMS). The IMS heatsink can be machined to a customer’s requirements, serving as part of the mechanical design in the final application.
Rogers’ thermal management materials also includes COOLSPAN® TECA adhesive film for bonding heatsinks to circuit materials with reliable thermal interfaces. This lead-free-process-compatible thermoset, epoxy-based, silver-filled adhesive film features outstanding thermal conductivity of 6 W/m•K to ensure thermally stable bonds between heatsinks and PCB materials. COOLSPAN TECA represents a practical alternative to fusion bonding, sweat soldering, press-fit, and other methods for attaching circuits to heatsinks and other mechanical structures.
RO3003™ laminates are ideal for loss-critical millimeter wave frequency designs, where consistent circuit performance matters, such as automotive radar sensors and point-to-point microwave backhaul communications systems. While already a benchmark for 77 GHz automotive radar sensors, RO3003 3.0 dielectric constant laminates are available with ½ ounce and 1 ounce rolled copper foil. Combining the very low dielectric loss of the RO3003 PTFE-ceramic resin system with smooth foil, results in high frequency circuit materials with best-in-class insertion loss. Also available with up to 0.040” thick copper plate.
Rogers CLTE-XT™ laminates also combine ceramic and PTFE materials to achieve excellent electrical and mechanical stability for a wide range of applications, from amplifiers to passive components. These materials are characterized by low coefficient of thermal expansion (CTE) in all three axes and stable Dk with temperature. They are well suited for phase-sensitive circuits including in microwave feed networks and in satellite-communications (satcom) systems.
Quick Turn Inventory Program
Visitors to Booth 201 can also learn about Rogers’ Quick Turn Inventory Program for North American fabricators. The program assists those faced with time-sensitive prototyping requirements by shipping select RO4000® circuit materials within two business days after receipt of order. Products included are: RO4003C™, RO4350B™, and RO4835™ laminates and RO4450B™ and RO4450F™ bondply materials.
Design Session Presentation by John Coonrod
As part of the Free Design Session, John Coonrod, Technical Marketing Manager, will present “Copper Foil Surface Roughness and its Effect on High Frequency Performance,” Wednesday, September 14, from 10 AM to 11 AM. The presentation details how the surface roughness of a PCB’s copper conductor can affect a circuit’s insertion-loss and phase performance, especially at higher frequencies.
About Rogers Corporation
Rogers Corporation (NYSE:ROG) is a global technology leader in engineered materials to power, protect, and connect our world. With more than 180 years of materials science experience, Rogers delivers high-performance solutions that enable clean energy, Internet connectivity, advanced transportation and other technologies where reliability is critical. Rogers delivers Power Electronics Solutions for energy-efficient motor drives, vehicle electrification, and alternative energy; Elastomeric Material Solutions for sealing, vibration management, and impact protection in mobile devices, transportation interiors, and prformance apparel; and Advanced Connectivity Solutions materials for wireless infrastructure, automotive safety and radar systems. Headquartered in Connecticut (USA), Rogers operates manufacturing facilities in the United States, China, Germany, Belgium, Hungary, and South Korea, with joint ventures and sales offices worldwide. For more information, click here.
Rogers Corporation (NYSE:ROG) is a global technology leader in engineered materials to power, protect, and connect our world. With more than 180 years of materials science experience, Rogers delivers high-performance solutions that enable clean energy, Internet connectivity, advanced transportation and other technologies where reliability is critical. Rogers delivers Power Electronics Solutions for energy-efficient motor drives, vehicle electrification, and alternative energy; Elastomeric Material Solutions for sealing, vibration management, and impact protection in mobile devices, transportation interiors, and prformance apparel; and Advanced Connectivity Solutions materials for wireless infrastructure, automotive safety and radar systems. Headquartered in Connecticut (USA), Rogers operates manufacturing facilities in the United States, China, Germany, Belgium, Hungary, and South Korea, with joint ventures and sales offices worldwide. For more information, click here.
Share on:
Suggested Items
Koh Young Technology Showcasing Advanced Packaging Inspection Solutions at SEMICON Japan at Tokyo Big Sight
11/26/2024 | Koh Young TechnologyKoh Young Technology, the global leader in True 3D measurement-based inspection solutions, will demonstrate its award-winning inspection solutions in Hall 1 Booth 1310 at Tokyo Big Sight on December 12-13, 2024.
Indium Technical Expert to Present at SiP Conference China
11/25/2024 | Indium CorporationIndium Corporation Senior Area Technical Manager for East China Leo Hu is scheduled to deliver a presentation on Low-Temperature Solder Material in Semiconductor Packaging Applications at SiP China Conference 2024 on November 27 in Suzhou, China.
Indium Corporation to Showcase Precision Gold Solder Solutions at MEDevice Silicon Valley 2024
11/18/2024 | Indium CorporationIndium Corporation® will feature its high-reliability AuLTRA® MediPro gold solder solutions at MEDevice Silicon Valley, taking place on November 20-21 in Silicon Valley, California. AuLTRA® MediPro is a family of high-performance, precision gold solder solutions for critical medical applications.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Silicon Valley Expo & Tech Forum
11/14/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Silicon Valley Expo & Tech Forum taking place on December 5 at the Fremont Marriott Silicon Valley in Fremont, California.
Data-driven Precision in PCBA Manufacturing
11/13/2024 | Julie Cliche-Dubois, CogiscanThe intricacies involved in electronics manufacturing require more than just expensive equipment and skilled technicians; they necessitate an accurate understanding of the entire production flow, informed and driven by access and visibility to reliable data.
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in