New Drone to Ensure Safer Demining
December 20, 2016 | DTUEstimated reading time: 3 minutes
Researchers at DTU intend to develop a drone with magnetometers capable of mapping mines in former war zones, which will make demining more efficient and less dangerous. The project has received DKK 11 million from Innovation Fund Denmark.
Mines are usually made of magnetic steel, and the search for mines therefore often involves ‘magnetometers’—instruments capable of measuring minor magnetic deviations in the subsurface and thereby localizing the mines.
“The plan is for our drone and its unique magnetometer module to make demining more precise than the current method of using off-road vehicles on land and special divers in coastal areas. It will also minimize the risk of injuries for the people involved, as the drone can be operated from a safe position outside the mined areas,” explains Arne Døssing, Senior Research, DTU Space, who heads the project of developing the new technology.
He also believes that the new demining system could reduce the costs and time of mapping the presence of mines by more than 50 per cent.
A unique system
Arne Døssing is the originator of the idea to develop the new demining system consisting of a newly developed drone type with a frame installed underneath it, which will be specially developed by DTU Space researchers. The frame is referred to as a ‘magnetometer bird’, as the magnetometer is embedded in the frame, which is attached to the drone and hangs approx. 5-10 metres below it.
“It will be the first drone in the world to fly with a ‘bird’ underneath it. This construction is absolutely necessary to ensure the ultra-sensitive magnetometers are as close to the surface as possible, at the same time as minimizing exposure to magnetic disturbances from other instruments and from the flying drone,” says Arne Døssing.
For the same reason, the equipment designed to measure the exact position of the drone—and thus of the detected mines—is installed in the drone rather than in the ‘bird’. This takes place in close collaboration between DTU researchers and the Danish drone company Sky-Watch A/S.
The drone itself is also an innovation. It has been developed by Sky-Watch, and in addition to the ability to fly like a regular aircraft, it allows for vertical take-off and landing in the same way as a helicopter.
Great interest in efficient demining
Initially, the researchers will be focusing on the need to clear mines from World War II, before laying power cables to new offshore wind turbines. It is assumed that the number of unexploded mines from World War II hidden in the sea and on land exceeds 40,000.
Therefore, there are several parties involved in the project which are interested in applying the new technology. In addition to the drone company Sky-Watch A/S, DONG Energy is establishing many new offshore wind farms, Geo is carrying out geotechnical surveys in connection with, for example, offshore wind farms, and the Royal Danish Navy’s mine clearance service often has the dangerous task of clearing the mines.
The magnetometer drone will furthermore be tested in the mountains of Greenland, where it may have an impact on the search for mineral deposits or military waste, and it will also be tested from a vessel in relation to its ability to detect large mines in deeper waters. In both cases, the drone’s ability to take off and land vertically is significant.
Denmark to take a leading role in magnetic mapping
Over the next four years, researchers from DTU Space will develop and test the new technology. The hope is that in the long term, the technology can supplement the existing mine detection technologies, which are both expensive and inefficient. This could potentially give Denmark a leading position in relation to magnetic mapping of the subsurface.
“The global market for flexible, efficient, and precise mapping of, for instance, mines, military waste, and minerals is big. So the project will allow Danish technology companies to take a strong position in this area,” says Arne Døssing.
Suggested Items
Shane Whiteside of Summit Reflects on Today's PCB Landscape
05/08/2024 | I-Connect007 Editorial TeamSummit Interconnect began as a printed circuit board manufacturing company just eight years ago and has seen impressive growth organically and through acquisition. Summit President and CEO Shane Whiteside takes a few moments to share his thoughts on the growing PCB industry in the United States.
BAE Systems and Eaton Expand Collaboration to Deliver Electric Drive Solutions for Heavy-Duty Trucks
05/08/2024 | PRNewswireBAE Systems, a leader in electric propulsion, and Eaton, a global power management company, are expanding their collaboration to include electric vehicle (EV) solutions for heavy-duty trucks.
Coherix Partners with EMU on 'Factory of the Future' Technology Program
05/08/2024 | PRNewswireMichigan-based Coherix is working with Eastern Michigan University (EMU) in Ypsilanti to develop "factory-of-the-future" manufacturing and assembly technology.
2024 Apple iPad Pro Estimated to Ship Between 4.5 to 5 Million Units
05/08/2024 | TrendForceApple’s recent product launch in May introduced a lineup of new tablets featuring advanced AMOLED screens. Notably, the Pro version boasts a dual-layer tandem structure designed to address the longstanding challenges of screen burn-in and lifespan that are common with AMOLED displays.
Simbe Partners with Plexus to Scale Manufacturing and Meet Global Retail Demand
05/08/2024 | Globe NewswireSimbe, the leading provider of Store Intelligence™ solutions that increase retailer performance through unprecedented visibility and insights, today announced a partnership with Plexus Corp. to bring its best-in-class retail robotics-as-a-service to market quickly and at global scale.