-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueRules of Thumb
This month, we delve into rules of thumb—which ones work, which ones should be avoided. Rules of thumb are everywhere, but there may be hundreds of rules of thumb for PCB design. How do we separate the wheat from the chaff, so to speak?
Partial HDI
Our expert contributors provide a complete, detailed view of partial HDI this month. Most experienced PCB designers can start using this approach right away, but you need to know these tips, tricks and techniques first.
Silicon to Systems: From Soup to Nuts
This month, we asked our expert contributors to weigh in on silicon to systems—what it means to PCB designers and design engineers, EDA companies, and the rest of the PCB supply chain... from soup to nuts.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
CES 2017: Disruptive Technologies
January 16, 2017 | Dan Feinberg, Technology Editor, I-Connect007Estimated reading time: 16 minutes
Autonomous vehicles are an area showing amazing progress in just the last year. I covered this rapidly advancing technology in some detail just over a year ago, you can find that article here. However, there has been much progress in the last year and also much commitment to making this happen by the automotive industry.
It is interesting that I focused on NVIDIA at that time. At that time, they were working with a number of major automotive companies with the goal of partnering with some of them to bring the dream of self-driving vehicles to reality. This year at CES NVIDIA announced partnerships with Audi, with both companies committing to have fully autonomous vehicles available by the year 2020.
Later in the show we received a text saying that if we would immediately come to the Mercedes booth Jen-Hsun Huang would be making a major announcement. That was interesting because if there was any major announcement to be made why wait less than 48 hours after the Key-Note address? Obviously, it must be something that might have been in the works, but in my humble opinion, not finalized until meetings were held at CES. The news was that NVIDIA and Mercedes announced a partnership, so Mercedes is now committing to their AI path.
What is the disruptive technology behind the rapidly advancing success of autonomous vehicles, it is AI (Artificial Intelligence). AI of this power requires a supercomputer of sorts and the mini supercomputer in a cigar box of choice running the autoploid system for many is the DRIVE PX 2. The new Tesla Model S is capable of fully autonomous driving with expected software updates.
Some additional interesting announcements and progress shown: Baidu featured their L3 autonomous driving solution for environmental sensing, based on a Baidu created High Definition Map. Raw HD map data is processed via DRIVE PX 2 to detect and classify the surroundings, such as lane marking, and traffic signals, signs and other landmarks. Working with all the world’s major mapping companies so more of the world’s roads will be mapped sooner. These high-definition maps, accurate down to centimeters, are vital to enabling vehicles that can autonomously zip through the world safely and efficiently.
At the show Zenrin, Japan’s biggest mapmaker, announced Wednesday it’s working to streamline its map creation process using PX 2 powered AI.
LG featured a multi-screen vehicle cockpit demonstration. Finally, at the outside exhibit, you could see an Audi Q7 piloted driving concept and the NVIDIA BB8 test vehicle that both use DRIVE PX 2 as their brain. The upcoming vehicles, just a year or so away, are learning on their own. And that’s perhaps the surest sign that AI cars are here to stay.
And just the other day I received news that at CES 2018, one year away, there will be a number of fully autonomous shuttles fully in use shuttling us from hall to hall and from event to event.
In addition, I was able to try the latest Mercedes concept car that tends to the driver’s physical (and mental?) state. Upon sitting in the car and holding the steering wheel, it quickly measured my blood pressure, heart rate and I guess other things, and gave me a message as to my mood; it played music and adjusted the odor of the air flow using ionized air to elicit a calm attitude for safe driving. I do not know if this is something we want or would need, after all if the car is driving itself, why? But the fact that it can be done shows how far things have progressed.
As far as disruptive technologies, the one that seems to change our everyday lives most in the next five-plus years is autonomous vehicles. The automotive industry has incorporated technology at an ever-increasing speed; in the last 25 years, we have added cellular communications, GPS navigation, various warning systems and greatly enhanced audio and comfort features, but as the man once said, “You ain’t seen nothin’ yet.”
No doubt that fully autonomous travel in your own car is not only possible, it is already here and will be widely available before our next presidential election. Assume that in the year 2027, just ten years, we will live in a world of 100% fully automated cars, no human driving. After all, the only thing that the supercomputers and up-to-date network mapping will not be able to determine is what humans that it shares the road with will do. What will this world look like? I can see highways being limited to just driverless cars and I predict it will start here in California. After all this is the state where the government knows more about what is good for you than you do, However, in this case they might be correct (if it happens and I believe it will.) Per Rory Buckeridge: “Well, first and foremost, it’s a much safer place to be. Road death is the eighth leading cause of death, with between 90% and 95% of car accidents the fault of human error.” The economic cost of road accidents is estimated to be around $277bn in 2013.” It will be a very different world for sure and while there are many disruptive technologies that are about to mature, I believe that this is the one that will have the greatest impact on our lives, our legal system and our economy. It is certainly one that we will continue to follow with great interest. After all, the next car we buy may very well be the last one we will be able to drive any time and any place we wish.
On a lighter note, my award for the most, uh, surprising offering of the show, how about a pair of underwear designed to protect you from the radiation emitted from that smartphone that you keep in your pocket. Disruptive? I do not want to know.
Note: Photos by Racheal Feinberg
Page 3 of 3Suggested Items
Unlocking Advanced Circuitry Through Liquid Metal Ink
10/31/2024 | I-Connect007 Editorial TeamPCB UHDI technologist John Johnson of American Standard Circuits discusses the evolving landscape of electronics manufacturing and the critical role of innovation, specifically liquid metal ink technology, as an alternate process to traditional metallization in PCB fabrication to achieve ever finer features and tighter tolerances. The discussion highlights the benefits of reliability, efficiency, and yields as a tradeoff to any increased cost to run the process. As this technology becomes better understood and accepted, even sought out by customers and designers, John says there is a move toward mainstream incorporation.
Fresh PCB Concepts: The Critical Nature of Copper Thickness on PCBs
10/31/2024 | Team NCAB -- Column: Fresh PCB ConceptsPCBs are the backbone of modern electronics and the copper layers within these boards serve as the primary pathways for electrical signals. When designing and manufacturing PCBs, copper thickness is one of the most critical factors and significantly affects the board’s performance and durability. The IPC-6012F specification, the industry standard for the performance and qualification of rigid PCBs, sets clear guidelines on copper thickness to ensure reliability in different environments and applications.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
The Cost-Benefit Analysis of Direct Metallization
10/21/2024 | Carmichael Gugliotti, MacDermid AlphaCarmichael Gugliotti of MacDermid Alpha discusses the innovative realm of direct metallization technology, its numerous applications, and significant advantages over traditional processes. Carmichael offers an in-depth look at how direct metallization, through developments such as Blackhole and Shadow, is revolutionizing PCB manufacturing by enhancing efficiency, sustainability, and cost-effectiveness. From its origins in the 1980s to its application in cutting-edge, high-density interconnects and its pivotal role in sustainability, this discussion sheds light on how direct metallization shapes the future of PCB manufacturing across various industries, including automotive, consumer electronics, and beyond.
Connect the Dots: Designing for Reality—Pattern Plating
10/16/2024 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we painted the picture of the outer layer imaging process. Now we are ready for pattern plating, where fabrication can get tricky. The board is now ready to receive the copper traces, pads, and other elements specified in the original CAD design. This article will lay out the pattern plating process and discuss constraints in the chemistries that must be properly managed to meet the customer's exacting manufacturing tolerances.