The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
AIM to Participate at Strategies in Light & the Led Show
February 17, 2017 | AIM SolderEstimated reading time: 1 minute
AIM will highlight their full range of joining materials including indium and gold/tin solders at Strategies in Light & The LED Show, scheduled to take place February 28 – March 2, 2017 at the Anaheim Convention Center in Anaheim, CA. AIM will be located in booth 810.
AIM’s full range of joining materials includes indium and gold/tin solders for assembly and a wide variety of indium alloys for various applications. These alloys are available in paste, preforms, ribbon, spheres, ingot, wire and foils. AIM Specialty offers LED assembly materials for automotive lighting, general lighting, high brightness LED, LED thermal management and numerous other applications.
Developed by AIM, the REL61™ and REL22™ lead-free solder alloys have been specifically engineered as exceptionally durable alloys for extreme service environments. High thermal demands make REL61 and REL22 ideally suited to LED applications by providing superior thermal cycling performance and lower voids versus other lead-free alloys. REL61 and REL22 have also shown to reduce tin whisker formation and improved strength versus SAC alloys making them ideal for high reliability electronics applications.
To discover all of the products AIM offers, including indium and lead-free solders and to learn more about their revolutionary REL61 and REL22 high reliability solder alloys, visit the company at table 810 at Strategies in Light & The LED Show.
About AIM
Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, preforms, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. For more information about AIM, visit www.aimsolder.com.
About AIM Specialty Division
AIM manufactures and supplies solder and braze materials for the electronic, microwave, semiconductor, LED, and photonic industries. Our innovative products and technical support helps our customers to achieve the highest quality and yields in their production processes. For more information about AIM Specialty Materials, please visit www.aimspecialty.com.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.