The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Libra Industries Upgrades Speed on its ACE Selective Solder System
February 21, 2017 | Libra IndustriesEstimated reading time: 1 minute
Libra Industries is pleased to announce that it has upgraded the software on its ACE K.I.S.S. 102 selective solder machine. With the new software and drive system, Libra Industries' ACE K.I.S.S. 102 runs up to 30 percent faster and the programming time has been reduced by at least 50 percent. Additionally, the new software has a better user interface along with dual screens to watch the product run and detect issues early on.
The K.I.S.S 102 is an automated, simple to use low cost selective soldering machine using the proven "traveling mini–solder wave," featuring the "Super fast" robotic motion to maximize production. It is used to flux and solder through-hole components on SMT boards within close proximity of adjacent components. This process overcomes the limitations of operator dependent soldering with a truly flexible automated flux application and molten solder delivery system.
The K.I.S.S 102 couples high throughput with precise process controls. The programmable features provide the tools to set all process parameters, including immersion depths, preheat dwells, travel distances and speeds, solder temperature, and wave height. Once set, the system will repeat precisely.
Libra Industries continues to invest to provide customized manufacturing solutions to help make its customers more competitive and improve their profitability. For more information, visit www.libraind.com.
About Libra Industries
Libra Industries is a leading provider of integrated Electronic Manufacturing Services (EMS), serving OEMs with complex or technologically sophisticated manufacturing requirements in a broad range of industries including industrial automation, medical, military and aerospace, instrumentation and LED lighting. Five world-class manufacturing facilities allow Libra Industries to provide customers with manufacturing flexibility including complete system build, module and subassembly production, as well as simple to complex PC board assembly. With an ongoing commitment to investment in people, quality systems, and the latest manufacturing equipment and processes, Libra Industries is committed to managing their clients’ products from initial design and prototype to full production; assisting their clients in their efforts to improve time to market, reduce total systems cost, and increase quality.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.