Dan’s Biz Bookshelf: ‘Elevate: Push Beyond Your Limits'
The Marketing Minute: The First Step to More Sales—Marketing
It’s Only Common Sense: Customer Service Is Sales in Disguise
Exciting New Technology: Thermal Risk Management
March 1, 2017 | Douglas G. Brooks, PhDEstimated reading time: 1 minute
Two years ago I entered into a collaboration with Dr. Johannes Adam, from Leimen Germany. Johannes has written a software simulation tool called Thermal Risk Management (TRM). We used it to look at the thermal characteristics of PCB traces under a variety of conditions, and it is hard for me to contain my excitement and enthusiasm for what it does and what we learned about traces using it. Our collaboration resulted in the publication of numerous articles and a book. In this article, I’ll talk about some of the capabilities of TRM that really caught my attention. (Note: TRM has much more power than I will have space to discuss in this article. See the technical note at the end of the article for more on this.)
TRM allows us to model a PCB trace and predict its thermal properties. So the first thing we did was model a variety of traces and compare the results with the data in IPC-2152. The data fit very well, giving us confidence that the process was valid. But if the software could fit a single trace in isolation, then it could also predict the temperature of a trace under a variety of other conditions that board designers more typically face, such as changes in length, the proximity of adjacent traces, and the presence of planes. For example, Figure 1 illustrates the thermal patterns around a trace with and without a plane directly under the trace. The presence of a plane clearly lowers the trace temperature and widens the area of the board where the thermal profile spreads.
But TRM also allows us to view things in many other dimensions. For example, Figure 2 shows the thermal profile of a cross-sectional view of the board underneath the trace. The thermal profile underneath the trace through the board without the plane extends all the way to the far side, but the thermal profile of the board with the plane changes dramatically at the plane. I know of no other way to look at this profile other than with a computer simulation.
To read this entire article, which appeared in the February 2017 issue of The PCB Design Magazine, click here.
Share on:
Suggested Items
Meet the Author Podcast: Martyn Gaudion Unpacks the Secrets of High-Speed PCB Design
07/16/2025 | I-Connect007In this special Meet the Author episode of the On the Line with… podcast, Nolan Johnson sits down with Martyn Gaudion, signal integrity expert, managing director of Polar Instruments, and three-time author in I-Connect007’s popular The Printed Circuit Designer’s Guide to... series.
Intervala Hosts Employee Car and Motorcycle Show, Benefit Nonprofits
08/27/2024 | IntervalaIntervala hosted an employee car and motorcycle show, aptly named the Vala-Cruise and it was a roaring success! Employees had the chance to show off their prized wheels, and it was incredible to see the variety and passion on display.
KIC Honored with IPC Recognition for 25 Years of Membership and Contributions to Electronics Manufacturing Industry
06/24/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, is proud to announce that it has been recognized by IPC for 25 years of membership and significant contributions to electronics manufacturing.
Boeing Starliner Spacecraft Completes Successful Crewed Docking with International Space Station
06/07/2024 | BoeingNASA astronauts Barry "Butch" Wilmore and Sunita "Suni" Williams successfully docked Boeing's Starliner spacecraft to the International Space Station (ISS), about 26 hours after launching from Cape Canaveral Space Force Station.
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.