Clarifying How Lithium Ions Ferry Around in Rechargeable Batteries
March 29, 2017 | IBSEstimated reading time: 3 minutes

Although most of our electronic devices, like mobile phones, laptops and electric vehicles use lithium rechargeable batteries, what is going on inside them is not fully understood. Researchers from the Center for Molecular Spectroscopy and Dynamics, within the Institute for Basic Science (IBS) succeeded in observing in realtime the ultrafast dynamics of lithium ions with femtosecond time resolution (1/1,000,000,000,000,000 of a second). These findings help to explain what happens during the process of charging and discharging: a cornerstone for the advanced batteries with better performance. Published on Nature Communications, this study reveals the interactions between lithium ions and electrolytes, which are organic molecules that surround the lithium ions and conduct electricity, and were able to conclude that the existing theory on ion diffusion in lithium rechargeable batteries is not completely correct.
Figure 1: Schematics of the inside of a lithium rechargeable battery. Electrolytes (blue elipse) surround lithium ions (green circles), forming the so-called "solvation shell" or "solvation sheath". These shells move from the positive to the negative pole of the battery, when the battery is charging, and vice-versa when the battery is in use. It is believed that lithium ions associate mainly with ethylene carbonate (EC), while dimethyl carbonate (DMC) and diethyl carbonate (DEC) are just enhancing the movement of these shells between the batteries' poles, like "lubricants". This study showed that this theory is not completely true.
In a typical commercial lithium rechargeable battery, lithium ions dissolved in electrolytes move from the positive to the negative pole of the battery when the battery is charging. And, they migrate in the opposite way, when the battery is in use. The lithium ion mobility determines the performance of the lithium rechargeable battery, and determines how rapidly they can charge and discharge.
Lithium ions, however, do not migrate alone, they are surrounded by electrolytes that facilitate the journey from one pole to the other. Currently, the electrolytes in our lithium rechargeable batteries are typically composed of a mixture of: ethylene carbonate (EC), dimethyl carbonate (DMC), and diethyl carbonate (DEC) in equal concentration. It is believed that lithium ions associate mainly with EC, forming the so-called "solvation shell" or "solvation sheath", while DMC and DEC are just enhancing the movement of these shells between the batteries' poles, like "lubricants". However, while most of the previous studies focused on the static properties of the bond between electrolytes and lithium ions, this study clarifies the dynamics of the bonding. Like in a motion picture, where a series of still images displayed rapidly one after the other create the effect of movements, IBS scientists took quick shots to analyze the formation and breaking of these bonds. However, while movies are typically filmed and displayed at 24 still images per seconds, these measurement "shots" were taken at time intervals of just femtoseconds.
Thanks to a tool called two-dimensional infrared spectroscopy, the team measured how lithium ions bind to the oxygen atoms of the DEC and found that these bonds break and form in a matter of 2-17 picoseconds (1/1,000,000,000,000 of a second). The timescale is similar for DMC. This means that DMC and DEC are more than just "lubricants", they are also part of the solvation shell together with EC and may play an active role in transporting lithium ions to the battery's pole.
Figure 2: Dynamics of the bonding between lithium ions (Li+) and diethyl carbonate (DEC) at picosecond speeds. (Left) Two-dimensional infrared spectroscopy data show bonded DEC-Li+ (inside dashed green circle) and unbonded DEC (inside dashed violet circle). (Right) After less than 10 picoseconds some of the bonds between DEC and Li+ break (violet circle, right), while other form (green circle).
"It was believed that EC makes a rigid shell around lithium ions during the migration between electrodes. However, this study shows that the solvent shell is not that rigid, it is constantly restructured during the ion transport," explains Professor CHO Minhaeng. And concludes: "For this reason, revising the existing lithium ion diffusion theory is inevitable."
The research team is working on a follow-up study to establish a new theory of the lithium ion diffusion process and it is building a new ultra-high-speed laser spectroscopy instrument that can observe the chemical reaction as well as film it on top of the rechargeable batteries' electrodes.
Suggested Items
TRI to Unveil New High-Throughput AOI and AXI at productronica 2023
09/15/2023 | TRITest Research, Inc. (TRI), the leading test and inspection systems provider for the electronics manufacturing industry, will join productronica 2023, which will be held at Messe München Center from November 14 – 17, 2023.
UK Space Agency Launches Consultation on Variable Liability Limits for Orbital Operations
09/15/2023 | UK Space AgencyThe proposals from the UK Space Agency follow a review into the UK’s approach to setting the amount of an operator’s liability in licences for orbital operations, a key commitment of the government’s National Space Strategy.
MediaTek Successfully Develops First Chip Using TSMC's 3nm Process, Set for Volume Production in 2024
09/14/2023 | MediaTekMediaTek and TSMC announced that MediaTek has successfully developed its first chip using TSMC's leading-edge 3nm technology, taping out MediaTek’s flagship Dimensity system-on-chip (SoC) with volume production expected next year.
MKS’ Atotech to Participate in IPCA Expo 2023
09/14/2023 | MKS’ AtotechMKS’ Atotech, a leading surface finishing brand of MKS Instruments, will participate in the upcoming IPCA Expo at Bangalore International Exhibition Centre (BIEC) and showcase its latest PCB manufacturing solutions from September 13 – 15.
Comtech Unveils New BRIDGE Solutions to Increase Access to Global Hybrid Connectivity
09/12/2023 | Business WireComtech launched its new blended, resilient, integrated, digital, global, end-to-end (BRIDGE) connectivity solutions. Comtech’s BRIDGE solutions provide portable, adaptable, full-service communications networks that can be established in a matter of hours and help “bridge the gap” for traditional satellite and terrestrial infrastructures.