Dan’s Biz Bookshelf: ‘The Art of Going SLOW’
Happy’s Tech Talk #39: PCBs Replace Motor Windings
Punching Out: Characteristics of Successful Leaders in North American PCB and EMS Sectors
Eagle Electronics Invests in Quality and Reliability with ATG A7a Flying Probe Tester
April 18, 2017 | Eagle ElectronicsEstimated reading time: 1 minute
Eagle Electronics has recently placed an order for a new ATG A7a automatic flying probe tester. The new tester will allow Eagle to test 100% of their boards via flying probe. The strategy is to utilize the new machine as the testing workhorse while their existing three Microcraft flying probe machines will primarily be used for retest and verification. The intent is to continue to test in panel form for most products. In automatic mode, the new machine will segregate good and bad boards automatically.
Some key features of the A7A include:
- fully automated test system for production and customized panel
- for lights out operation
- different type of products can be loaded in parallel
- biggest panel size 650 mm x 535 mm
- tension tools for automatic handling of flex boards down to 0.3 mm
The A7a machine also has the capability to test in Kalvin mode which can catch micro cracks and micro voids in small via structures through low ohm testing. This would not be the standard test, as it is considerably slower. However, on certain high layer count, HDI and high reliability boards it will be a beneficial capability. Delivery is expected late May.
President and CEO, Mike Kalaria stated, “As Eagle Electronics continues to grow at a rapid pace, it is important that we invest in our equipment and processes in order to meet the needs of our growing customer base. By implementing the A7a into our operations, we will not only increase the speed at which we are able to turn product, but it will also assure that everything we produce is top quality and free from any defects that could affect the customer’s final products.”
Delivery of the A7a is expected in late May in conjunction with the installation of two new Lenz drilling machines.
About Eagle Electronics
Since 1979, Eagle Electronics Inc. has provided our customers with the highest quality printed circuit boards at fair and competitive prices. From our modern 50,000 sq. ft. facility, we have been meeting and exceeding our customer's ever increasing expectations and requirements. From providing short standard lead times to very low premiums on quick turns we strive to provide the best total value in high technology rapid turn-around PCBs in the industry. Learn more at eagle-elec.com.
Share on:
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/13/2025 | Marcy LaRont, I-Connect007Today is Friday the 13th, and in much of Western folklore, this is a day when bad luck is lurking. But while Friday the 13th may top Western superstition charts, the global calendar is sprinkled with its own unlucky legends. In Spain and Greece, the bad juju lands on Tuesday the 13th—a day linked to Mars, the god of war, and naturally, chaos. In Italy, it’s Friday the 17th that is feared, thanks to the Roman numeral XVII, which can be rearranged to spell VIXI—Latin for “I have lived” (a poetic way of saying you’re dead).
TTCI Celebrates Melanie Rutkauskas’ 10-Year Anniversary and Her Leadership of New Training Division
06/12/2025 | TTCIThe Test Connection Inc. (TTCI), a leading provider of electronic test and manufacturing solutions, is proud to celebrate Melanie Rutkauskas on her 10-year anniversary with the company.
Bridging the Knowledge Gap in Test: A Conversation with Bert Horner
06/11/2025 | Barry Matties, I-Connect007Bert Horner is a seasoned industry veteran and co-creator of The Test Connection, Inc. (TTCI), a test and inspection company spanning over 45 years. In this candid conversation, Bert reflects on the challenges our industry faces with the retirement of career professionals and the subsequent loss of critical tribal knowledge. As he unveils The Training Connection’s innovative training initiatives, Bert emphasizes the importance of evolving educational programs that align with industry needs, particularly in design for test (DFT), and sheds light on strategies being implemented to foster the next generation of engineers.
IPC Hall of Fame Spotlight Series: Highlighting Bob Neves
06/11/2025 | Dan Feinberg, I-Connect007Many IPC members who have contributed significantly to IPC and our industry have been awarded the IPC Raymond E. Pritchard Hall of Fame (HOF) Award. This Hall of Fame spotlight features industry veteran Bob Neves, who joined IPC in 1986 and was inducted into the IPC Hall of Fame in 2007.
GEN3 Set to Host HATS²™ Technical Day at A.W. Technical Centre with Bob Neves
06/09/2025 | Gen3GEN3, a global leader in reliability testing and measurement solutions for the electronics industry, is excited to announce a dedicated HATS²™ Technical Day to be held at the A.W. Technical Centre in Farnborough, GEN3’s HQ. The event will showcase the HATS²™ (Highly Accelerated Thermal Shock) system with demos and presentations by Bob Neves, Chairman of RAS Inc. and creator of the HATS²™.