NASA Seeks 'FabLab' Concepts for In-Space Manufacturing
May 8, 2017 | NASAEstimated reading time: 2 minutes
NASA is seeking proposals for development of a first-generation, in-space, multi-material fabrication laboratory, or FabLab, for space missions. The FabLab solicitation is issued as Appendix B of the Next Space Technologies for Exploration Partnerships (NextSTEP-2) Broad Agency Announcement.
Multi-material sensors like the one pictured above are vital to space ship operations, and need to be fabricated on demand during deep space missions.
The FabLab development path will be implemented in three phases with the objective of the final phase to demonstrate a commercially developed FabLab on the International Space Station. This solicitation seeks responses only to Phase A, in which private industry partners will produce ground-based prototypes with a measurable ability to mature into flight demonstrations on the space station within three years.
FabLab is part of a broad agency strategy and series of investments managed by NASA's Advanced Exploration Systems Division (AES) and Space Technology Mission Directorate (STMD) to advance key technology capability areas. According to Jason Crusan, director of AES, which also manages NextSTEP, FabLab is a logical extension of in-space manufacturing following the success of 3-D printing plastics on the space station.
International Space Station astronaut Barry “Butch” Wilmore holds a science sample container that took two hours to make in December 2014. The container was the first object to be printed with two parts: a lid and a container.
“We’ve already seen the benefits of on-demand manufacturing for tools and replacement parts on station,” said Crusan. “We want to increase the number of materials we can use to manufacture items on-demand in space and improve overall manufacturing efficiencies as well.” He added that in-space manufacturing ultimately should become an end-to-end process, capable of recycling feedstock as well as harvesting it from extraterrestrial sources.
For FabLab Phase A, NASA is requesting ground prototypes designed to be compatible with the space station’s EXPRESS Racks and capable of remote-controlled operations from Earth to manufacture multi-material components, including metals. Phase A selectees will have 18 months to deliver the prototype, after which NASA will determine which, if any, partners will continue to Phase B to further mature their technologies on the NextSTEP development path. Phase B details, including the maturation path to the final Phase C, will be released under a separate solicitation.
“Having an integrated capability for on-demand manufacturing and repair of components and systems during space missions will be integral for sustainable exploration missions,” said Jim Reuter, deputy associate administrator for STMD Programs. “This is a rapidly-evolving, disruptive area in which NASA wants to continue working with industry and academia to develop these technologies through collaborative mechanisms such as this one.” He adds, “This BAA solicitation has great potential for developing meaningful applications for space missions, as well as direct terrestrial commercial infusion.”
NextSTEP is a public-private partnership cost-sharing development model managed by AES that advances deep space exploration capabilities to support human missions in deep space. Small businesses, as defined by NASA’s Small Business Innovative Research Program, are eligible for pro-rated cost-sharing agreements when partnering to develop capabilities for this NextSTEP Appendix.
NASA will host an informational industry forum to address questions, tentatively scheduled for May 25, 2017 at 11 a.m. EDT. Final inquiries from prospective responders to the NextSTEP-2 Appendix B are due June 2, 2017, and notices of intent (NOIs) are encouraged to be provided by June 16. Proposals are due August 2, 2017.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Insulectro on Attracting Young Talent to the Electronics Manufacturing Industry
05/16/2024 | Real Time with...IPC APEX EXPOInsulectro's Doug Gotelli and Mitchell Benson explore the challenges of drawing young talent into the electronics manufacturing industry. They underscore the significance of manufacturing and the urgency of tackling the workforce shortage. They also discuss internship programs, the industry's resilience amid the pandemic, and the rewarding experiences of working in this sector.
Siemens, Foxconn Team Up to Optimize Forward-thinking Manufacturing
05/16/2024 | FoxconnSiemens AG, a leading technology company, and Hon Hai Technology Group (Foxconn), the world’s largest electronics manufacturer, have signed a memorandum of understanding (MoU) to drive digital transformation and sustainability in smart manufacturing platforms.
TRI Opens New Manufacturing Facility
05/16/2024 | TRITest Research, Inc. (TRI), the leading test and inspection systems provider for the electronics manufacturing industry, announced that it has opened a state-of-the-art R&D and manufacturing facility.
SEMICON West 2024 to Spotlight U.S. Chip Industry Investments, Supply Chain Resilience, Talent, and Global Growth and Innovation
05/15/2024 | SEMISEMICON West 2024 will gather industry experts and leaders July 9-11 at the Moscone Center in San Francisco for insights into the latest trends and innovations in sustainability, supply chain management, workforce development and other critical industry issues.
Using AI to Redefine Productivity
05/15/2024 | Nolan Johnson, SMT007 MagazinePlato Systems, a machine perception company spun out of Stanford University, employs AI and video data to analyze and optimize the human component in manufacturing. Initially focused on semiconductors, Plato Systems has expanded into EMS manufacturing. Co-founder and CEO Amin Arbabian, along with product advisor Anders Holden and head of growth Luis Vidal, discuss their approach to changeover optimization and its impact on productivity in the industry. They’ve also included customer Raj Vora in the conversation.